---------------------------------------------------------------------- Contents: 18/07/1991 19:24 4,468 ST1090N.TXT 30/10/1991 13:30 3,312 ST1096N.TXT 18/07/1991 19:25 4,487 ST1111N.TXT 24/01/1995 12:12 5,782 ST11200N.TXT 02/02/1993 16:21 2,926 ST11201N.TXT 18/07/1991 19:25 5,819 ST1126N.TXT 18/07/1991 19:26 5,830 ST1133N.TXT 10/05/1994 17:46 2,689 ST1133NS.TXT 18/07/1991 19:26 4,484 ST1156N.TXT 18/07/1991 19:26 5,817 ST1162N.TXT 30/10/1991 13:31 6,001 ST1186N.TXT 24/01/1995 12:08 6,879 ST11900N.TXT 24/01/1995 12:10 7,123 ST11900W.TXT 02/11/1994 15:32 6,091 ST11950N.TXT 24/01/1995 12:58 6,102 ST11950W.TXT 30/10/1991 13:32 5,994 ST1201N.TXT 30/10/1991 13:32 6,003 ST1239N.TXT 24/01/1995 12:09 6,890 ST12400N.TXT 24/01/1995 12:11 7,599 ST12400W.TXT 11/12/1992 19:15 3,055 ST12401N.TXT 24/01/1995 13:04 6,568 ST12450W.TXT 09/12/1994 12:28 6,148 ST12550N.TXT 24/01/1995 12:58 6,158 ST12550W.TXT 12/07/1991 17:50 3,094 ST125N.TXT 12/07/1991 17:50 3,096 ST138N.TXT 13/05/1993 18:07 5,253 ST1400N.TXT 13/05/1993 18:07 5,246 ST1401N.TXT 13/05/1993 18:08 5,237 ST1480N.TXT 13/05/1993 18:09 5,064 ST1481N.TXT 09/12/1994 12:30 6,948 ST15150N.TXT 24/01/1995 12:58 6,142 ST15150W.TXT 24/01/1995 12:18 7,152 ST15230N.TXT 24/01/1995 12:18 7,122 ST15230W.TXT 30/10/1991 13:28 3,325 ST157N.TXT 13/05/1993 18:09 5,066 ST1581N.TXT 23/10/1991 12:55 3,071 ST177N.TXT 24/01/1995 12:13 5,649 ST1830N.TXT 24/01/1995 12:13 5,649 ST1950N.TXT 24/01/1995 12:13 5,713 ST1980N.TXT 31/10/1991 12:16 3,397 ST2106N.TXT 16/07/1992 11:48 3,933 ST2125N.TXT 10/05/1994 17:46 6,019 ST21930N.TXT 16/07/1992 11:50 3,936 ST2209N.TXT 12/07/1991 17:51 2,711 ST225N.TXT 31/10/1991 12:35 3,744 ST2383N.TXT 22/05/1992 15:47 3,746 ST2502N.TXT 26/08/1991 18:27 2,805 ST251N.TXT 31/10/1991 12:17 3,062 ST277N.TXT 31/10/1991 12:17 2,981 ST296N.TXT 24/01/1995 12:04 6,793 ST31200N.TXT 24/01/1995 12:06 7,090 ST31200W.TXT 24/01/1995 12:14 6,089 ST31230N.TXT 24/01/1995 12:16 7,071 ST31230W.TXT 09/12/1994 12:28 5,819 ST31250N.TXT 09/12/1994 12:29 7,745 ST31250W.TXT 08/08/1994 18:01 6,608 ST31930N.TXT 24/01/1995 12:15 6,089 ST32430N.TXT 24/01/1995 12:16 7,076 ST32430W.TXT 09/12/1994 12:29 5,820 ST32550N.TXT 09/12/1994 12:29 7,746 ST32550W.TXT 17/04/1992 11:45 3,543 ST325N.TXT 08/08/1994 18:04 9,471 ST3283N.TXT 08/08/1994 18:04 7,064 ST3285N.TXT 08/08/1994 18:05 7,067 ST3390N.TXT 06/12/1994 13:31 5,663 ST3500N.TXT 08/08/1994 18:05 7,122 ST3550N.TXT 08/08/1994 18:14 5,722 ST3600N.TXT 08/08/1994 18:15 5,985 ST3610N.TXT 24/01/1995 12:07 6,796 ST3620N.TXT 24/01/1995 12:07 6,004 ST3620W.TXT 08/08/1994 18:18 7,069 ST3655N.TXT 09/12/1994 12:31 6,589 ST410800.TXT 10/05/1994 17:46 5,945 ST41080N.TXT 10/05/1994 17:46 5,995 ST41080W.TXT 31/10/1991 12:44 3,819 ST41200N.TXT 11/02/1994 12:31 6,482 ST41520N.TXT 11/02/1994 12:31 6,354 ST41600N.TXT 08/08/1994 18:22 6,364 ST41601N.TXT 11/02/1994 12:34 5,814 ST41650N.TXT 11/02/1994 12:34 5,921 ST41651N.TXT 12/10/1993 14:14 4,267 ST4182N.TXT 11/02/1994 12:32 6,323 ST42000N.TXT 11/02/1994 12:32 4,505 ST42100N.TXT 11/02/1994 12:32 4,426 ST42101N.TXT 11/02/1994 12:32 6,125 ST42400N.TXT 11/02/1994 12:33 6,252 ST43400N.TXT 08/08/1994 19:44 6,310 ST43401N.TXT 08/08/1994 19:45 7,970 ST43402N.TXT 31/10/1991 12:37 3,771 ST4350N.TXT 04/11/1991 17:13 3,780 ST4376N.TXT 31/10/1991 12:40 3,811 ST4385N.TXT 31/10/1991 12:39 3,785 ST4702N.TXT 31/10/1991 12:42 3,597 ST4766N.TXT 31/10/1991 12:41 3,609 ST4767N.TXT 09/08/1994 13:36 5,135 ST5660N.TXT 11/02/1994 12:30 5,231 ST9235N.TXT ---------------------------------------------------------------------- SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-125N SCSI /ÄÄÄ¿ ³ O ³12 ³ O ³G ³ O ³G ³ O ³5 SCSI Connector \ÄÄÄÙ ÍÍÍÍÍPÍWÍAÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍ o o o o o ³::::::::::::::::::::::::1³ o o o o o ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; 4 2 1 ³ P ÚÄÄÄÄÄÄ1ÚÄÄÄÄÄÄ1ÚÄÄÄÄÄÄ1 ÄÄÂÄÄ ³ ³ ÀÄÄÄÄÄÄÙÀÄÄÄÄÄÄÙÀÄÄÄÄÄÄÙ ³ ³ ³ À Resistor Termination Packs ³ ³ ³ ³ ³ ÀÄ Parity Check enable ³ ÀÄÄÄ Not Used ÀÄÄÄÄÄÄÄ Drive ID's, ID 0 (none) for single drive system ST - 125N UNFORMATTED CAPACITY (MB) ________________25 FORMATTED CAPACITY (26 SECTORS) (MB) _____21.5 ACTUATOR TYPE ____________________________STEPPER TRACKS ___________________________________1,628 CYLINDERS ________________________________407 HEADS ____________________________________4 DISCS ____________________________________2 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________RLL TRANSFER RATE (mbits/sec) ________________7.5 SPINDLE SPEED (RPM) ______________________3,600 INTERFACE ________________________________SCSI TPI (TRACKS PER INCH) ____________________824 BPI (BITS PER INCH) ______________________16,546 AVERAGE ACCESS (ms) ______________________40/28* SINGLE TRACK SEEK (ms) ___________________8 MTBF (power-on hours) ____________________150,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.0 +12V TYPICAL (amps) __0.35 +5V TYPICAL (amps) ___0.9 TYPICAL (watts) ______9 MAXIMUM (watts) ______29 BUFFERED STEP PULSE RATE (micro sec) _____3-200 WRITE PRECOMP (cyl) ______________________N/A (408) REDUCED WRITE CURRENT (cyl) ______________N/A (408) LANDING ZONE (cyl)________________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE *ST125-0/ST125-1 Seagate reserves the right to change, without notice, product offerings or specifications. (6/26/90)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-138N SCSI /ÄÄÄ¿ ³ O ³12 ³ O ³G ³ O ³G ³ O ³5 SCSI Connector \ÄÄÄÙ ÍÍÍÍÍPÍWÍAÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍ o o o o o ³::::::::::::::::::::::::1³ o o o o o ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; 4 2 1 ³ P ÚÄÄÄÄÄÄ1ÚÄÄÄÄÄÄ1ÚÄÄÄÄÄÄ1 ÄÄÂÄÄ ³ ³ ÀÄÄÄÄÄÄÙÀÄÄÄÄÄÄÙÀÄÄÄÄÄÄÙ ³ ³ ³ À Resistor Termination Packs ³ ³ ³ ³ ³ ÀÄ Parity Check enable ³ ÀÄÄÄ Not Used ÀÄÄÄÄÄÄÄ Drive ID's, ID 0 (none) for single drive system ST - 138N UNFORMATTED CAPACITY (MB) ________________38 FORMATTED CAPACITY (26 SECTORS) (MB) _____32.2 ACTUATOR TYPE ____________________________STEPPER TRACKS ___________________________________2,452 CYLINDERS ________________________________615 HEADS ____________________________________4 DISCS ____________________________________2 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________RLL TRANSFER RATE (mbits/sec) ________________7.5 SPINDLE SPEED (RPM) ______________________3,600 INTERFACE ________________________________SCSI TPI (TRACKS PER INCH) ____________________824 BPI (BITS PER INCH) ______________________22,430 AVERAGE ACCESS (ms) ______________________40/28* SINGLE TRACK SEEK (ms) ___________________8 MTBF (power-on hours) ____________________150,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.0 +12V TYPICAL (amps) __0.35 +5V TYPICAL (amps) ___0.9 TYPICAL (watts) ______9 MAXIMUM (watts) ______29 BUFFERED STEP PULSE RATE (micro sec) _____3-200 WRITE PRECOMP (cyl) ______________________N/A (616) REDUCED WRITE CURRENT (cyl) ______________N/A (616) LANDING ZONE (cyl)________________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE *ST138R-0/ST138R-1 Seagate reserves the right to change, without notice, product offerings or specifications. (6/26/90)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-157N SCSI /ÄÄÄ¿ ³ O ³12 ³ O ³G ³ O ³G ³ O ³5 SCSI Connector \ÄÄÄÙ ÍÍÍÍÍPÍWÍAÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍ o o o o o ³::::::::::::::::::::::::1³ o o o o o ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; 4 2 1 ³ P ÚÄÄÄÄÄÄ1ÚÄÄÄÄÄÄ1ÚÄÄÄÄÄÄ1 ÄÄÂÄÄ ³ ³ ÀÄÄÄÄÄÄÙÀÄÄÄÄÄÄÙÀÄÄÄÄÄÄÙ ³ ³ ³ À Resistor Termination Packs ³ ³ ³ ³ ³ ÀÄ Parity Check enable ³ ÀÄÄÄ Not Used ÀÄÄÄÄÄÄÄ Drive ID's, ID 0 (none) for single drive system ST - 157N UNFORMATTED CAPACITY (MB) ________________57 FORMATTED CAPACITY (26 SECTORS) (MB) _____48.6 ACTUATOR TYPE ____________________________STEPPER TRACKS ___________________________________3,678 CYLINDERS ________________________________615 HEADS ____________________________________6 DISCS ____________________________________3 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________RLL (2,7) TRANSFER RATE (mbits/sec) ________________7.5 SPINDLE SPEED (RPM) ______________________3,600 AVERAGE LATENCY (mSEC) ___________________8.3 BUFFER ___________________________________2 Kbyte INTERFACE ________________________________SCSI SECTORS PER DRIVE ________________________94,860 TPI (TRACKS PER INCH) ____________________824 BPI (BITS PER INCH) ______________________22,430 AVERAGE ACCESS (ms) ______________________40/28* SINGLE TRACK SEEK (ms) ___________________8 MAX FULL SEEK (ms) _______________________ /70 MTBF (power-on hours) ____________________150,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.0 +12V TYPICAL (amps) __0.35 +5V TYPICAL (amps) ___0.9 TYPICAL (watts) ______9 MAXIMUM (watts) ______29 BUFFERED STEP PULSE RATE (micro sec) _____3-200 WRITE PRECOMP (cyl) ______________________N/A (616) REDUCED WRITE CURRENT (cyl) ______________N/A (616) LANDING ZONE (cyl)________________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE *ST157N-0/ST157N-1 Seagate reserves the right to change, without notice, product offerings or specifications. (6/26/90)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-177N SCSI /ÄÄÄ¿ ³ O ³12 ³ O ³G ³ O ³G o o o o o ³ O ³5 o o o o o \ÄÄÄÙ ÍÍÑÍÑÍÑÍÑÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ 1 2 4 ³ P ........................1 ÀÄÅÄÙ ³ ³ À.........................Ù ³ ³ ³ ÚÄÄÄÄÄÄ1ÚÄÄÄÄÄÄ1ÚÄÄÄÄÄÄ1 ³ ³ ³ ÀÄÄÄÄÄÄÙÀÄÄÄÄÄÄÙÀÄÄÄÄÄÄÙ ³ ³ ³ À Resistor Termination Packs ³ ³ ³ ³ ³ ÀÄ Parity Check enable ³ ÀÄÄÄ Not Used ÀÄÄÄÄÄÄÄ Drive ID's, ID 0 (none) for single drive system ST - 177N UNFORMATTED CAPACITY (MB) ________________N/A FORMATTED CAPACITY (26 SECTORS) (MB) _____60.8 ACTUATOR TYPE ____________________________VOICE COIL TRACKS ___________________________________4,606 CYLINDERS ________________________________921 HEADS ____________________________________5 DISCS ____________________________________3 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________RLL TRANSFER RATE (mbits/sec) ________________7.5 SPINDLE SPEED (RPM) ______________________3,600 INTERFACE ________________________________SCSI TPI (TRACKS PER INCH) ____________________1,300 BPI (BITS PER INCH) ______________________19,893 AVERAGE ACCESS (ms) ______________________20 SINGLE TRACK SEEK (ms) ___________________8 MTBF (power-on hours) ____________________150,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.0 +12V TYPICAL (amps) __0.5 +5V TYPICAL (amps) ___0.6 TYPICAL (watts) ______9 MAXIMUM (watts) ______27 BUFFERED STEP PULSE RATE (micro sec) _____3-200 WRITE PRECOMP (cyl) ______________________N/A (922) REDUCED WRITE CURRENT (cyl) ______________N/A (922) LANDING ZONE (cyl)________________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Seagate reserves the right to change, without notice, product offerings or specifications. (6/26/90)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-225N SCSI 5 G G 12 ÚSCSI Cable /Ä4Ä3Ä2Ä1Ä\ o o o o Ú...³.....................¿ ³ O O O O ³ Power o o o o ......................... ÀÄÄÄÄÄÄÄÄÄÙ ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÑÍÍÍÍÑÍÍÍÑÍÍÍÍÑÍÍÑÍÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ 1 2 4 P ÀÄÄÄÄ1 ÀÄÄÄÄ1 ÀÄÄÄÄ1 Terminating Resistors ÄÄÂÄÄ ÀÄ Parity Check enable ÀÄÄÄÄÄ ID Selects, ID 0 (none) for single drive system ST - 225N UNFORMATTED CAPACITY (MB) ________________25 FORMATTED CAPACITY (17 SECTORS) (MB) _____21.3 ACTUATOR TYPE ____________________________STEPPER TRACKS ___________________________________2,460 CYLINDERS ________________________________615 HEADS ____________________________________4 DISCS ____________________________________2 MEDIA TYPE _______________________________OXIDE RECORDING METHOD _________________________MFM TRANSFER RATE (mbits/sec) ________________5.0 SPINDLE SPEED (RPM) ______________________3,600 INTERFACE ________________________________SCSI TPI (TRACKS PER INCH) ____________________588 BPI (BITS PER INCH) ______________________9,827 AVERAGE ACCESS (ms) ______________________65 SINGLE TRACK SEEK (ms) ___________________20 MTBF (power-on hours) ____________________100,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.4 +12V TYPICAL (amps) __0.9 +5V TYPICAL (amps) ___1.2 TYPICAL (watts) ______16.8 MAXIMUM (watts) ______35 BUFFERED STEP PULSE RATE (micro sec) _____5-200 WRITE PRECOMP (cyl) ______________________N/A (616) REDUCED WRITE CURRENT (cyl) ______________N/A (616) LANDING ZONE (cyl)________________________670 IBM AT DRIVE TYPE ________________________0 or NONE Seagate reserves the right to change, without notice, product offerings or specifications. (6/26/90)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-251N SCSI 5 G G 12 ÚSCSI Cable /Ä4Ä3Ä2Ä1Ä\ o o o o Ú...³.....................¿ ³ O O O O ³ Power o o o o ........................1 ÀÄÄÄÄÄÄÄÄÄÙ ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÑÍÍÍÍÑÍÍÍÑÍÍÍÍÑÍÍÑÍÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ 1 2 4 P 1ÄÄÄÄÙ 1ÄÄÄÄÙ 1ÄÄÄÄÙ Terminating Resistors ÄÄÂÄÄ ÀÄ Parity Check enable ÀÄÄÄÄÄ ID Selects, ID 0 (none) for single drive system ST - 251N UNFORMATTED CAPACITY (MB) ________________51 FORMATTED CAPACITY (26/34* SECTORS) (MB) _43.1/43.2* ACTUATOR TYPE ____________________________STEPPER TRACKS ___________________________________3,280/2,520* CYLINDERS ________________________________820/630* HEADS ____________________________________4 DISCS ____________________________________2 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________RLL TRANSFER RATE (mbits/sec) ________________7.5/10* SPINDLE SPEED (RPM) ______________________3,600 INTERFACE ________________________________SCSI TPI (TRACKS PER INCH) ____________________777 BPI (BITS PER INCH) ______________________14,902/19,869* AVERAGE ACCESS (ms) ______________________40/28* SINGLE TRACK SEEK (ms) ___________________8 MTBF (power-on hours) ____________________70,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.0/2.5* +12V TYPICAL (amps) __0.5 +5V TYPICAL (amps) ___1.2/1.4* TYPICAL (watts) ______12/13* MAXIMUM (watts) ______30/37* BUFFERED STEP PULSE RATE (micro sec) _____3-200 WRITE PRECOMP (cyl) ______________________N/A (821/631*) REDUCED WRITE CURRENT (cyl) ______________N/A (821/631*) LANDING ZONE (cyl)________________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE *ST251N-0/ST251N-1 Seagate reserves the right to change, without notice, product offerings or specifications. (6/26/90)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-277N SCSI 5 G G 12 ÚSCSI Cable /Ä4Ä3Ä2Ä1Ä\ o o o (o) o Ú...³.....................¿ ³ O O O O ³ Power o o o (o) o ........................1 ÀÄÄÄÄÄÄÄÄÄÙ ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÑÍÍÍÍÑÍÍÍÑÍÍÍÍÑÍÍÑÍÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ 1 2 4 ³ P 1ÄÄÄÄÙ 1ÄÄÄÄÙ 1ÄÄÄÄÙ Terminating Resistors ÄÄÂÄÄ ³ ÀÄ Parity Check enable ³ ÀÄÄÄÄ Some PWA's have an extra jumper here ÀÄÄÄÄÄÄÄÄÄ ID Selects, ID 0 (none) for single drive system ST - 277N UNFORMATTED CAPACITY (MB) ________________77 FORMATTED CAPACITY (26/34* SECTORS) (MB) _64.9 ACTUATOR TYPE ____________________________STEPPER TRACKS ___________________________________4,920/3,768* CYLINDERS ________________________________820/628* HEADS ____________________________________6 DISCS ____________________________________3 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________RLL (2,7) TRANSFER RATE (mbits/sec) ________________7.5/10* SPINDLE SPEED (RPM) ______________________3,600 AVERAGE LATENCY (mSEC) ___________________8.3 INTERFACE ________________________________SCSI SECTORS PER DRIVE ________________________126,875 TPI (TRACKS PER INCH) ____________________777 BPI (BITS PER INCH) ______________________14,902/19,869* AVERAGE ACCESS (ms) ______________________40/28* SINGLE TRACK SEEK (ms) ___________________8 MAX FULL SEEK (ms) _______________________ /70 MTBF (power-on hours) ____________________70,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.0/2.5* +12V TYPICAL (amps) __0.5 +5V TYPICAL (amps) ___1.2/1.4* TYPICAL (watts) ______12/13* MAXIMUM (watts) ______30/37* BUFFERED STEP PULSE RATE (micro sec) _____3-200 WRITE PRECOMP (cyl) ______________________N/A (821/629*) REDUCED WRITE CURRENT (cyl) ______________N/A (821/629*) LANDING ZONE (cyl)________________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE *ST277N-0/ST277N-1 Seagate reserves the right to change, without notice, product offerings or specifications. (6/26/90)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-296N SCSI 5 G G 12 ÚSCSI Cable /Ä4Ä3Ä2Ä1Ä\ o o o (o) o Ú...³.....................¿ ³ O O O O ³ Power o o o (o) o ........................1 ÀÄÄÄÄÄÄÄÄÄÙ ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÑÍÍÍÍÑÍÍÍÑÍÍÍÍÑÍÍÑÍÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ 1 2 4 ³ P 1ÄÄÄÄÙ 1ÄÄÄÄÙ 1ÄÄÄÄÙ Terminating Resistors ÄÄÂÄÄ ³ ÀÄ Parity Check enable ³ ÀÄÄÄÄ Some PWA's have an extra jumper here ÀÄÄÄÄÄÄÄÄÄ ID Selects, ID 0 (none) for single drive system ST - 296N UNFORMATTED CAPACITY (MB) ________________96 FORMATTED CAPACITY (34 SECTORS) (MB) _____84.9 ACTUATOR TYPE ____________________________STEPPER TRACKS ___________________________________4,920 CYLINDERS ________________________________820 HEADS ____________________________________6 DISCS ____________________________________3 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________RLL (2,7) TRANSFER RATE (mbits/sec) ________________10 SPINDLE SPEED (RPM) ______________________3,600 AVERAGE LATENCY (mSEC) ___________________8.3 INTERFACE ________________________________SCSI SECTORS PER DRIVE ________________________165,851 TPI (TRACKS PER INCH) ____________________777 BPI (BITS PER INCH) ______________________19,869 AVERAGE ACCESS (ms) ______________________28 SINGLE TRACK SEEK (ms) ___________________8 MAX FULL SEEK (ms) _______________________ /70 MTBF (power-on hours) ____________________70,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.5 +12V TYPICAL (amps) __0.5 +5V TYPICAL (amps) ___1.4 TYPICAL (watts) ______13 MAXIMUM (watts) ______37 BUFFERED STEP PULSE RATE (micro sec) _____3-200 WRITE PRECOMP (cyl) ______________________N/A (821) REDUCED WRITE CURRENT (cyl) ______________N/A (821) LANDING ZONE (cyl)________________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Seagate reserves the right to change, without notice, product offerings or specifications. (6/26/90)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-325N SCSI Interface ³J2 10-pin version (located ³ on SIDE, near rear) ÀÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ³ 1 (front) ø ø ø ø ß (back) ø ø ø ø ø 4-pin DC ÍÍÍÍÍÏÍÑÍÍÑÍÍÑÍÍÑÍÍÑÍÍÍÍÍÍÍ SCSI Interface Power 1 2 4 ³ P connector ÚÄ1Ä2Ä3Ä4Ä¿ ÀÄÄÅÄÄÙ ³ ³ ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ ³ 0 0 0 0 ³ ³ ³ ³ ³::::::::::::::::::::::::1³ \12ÄGÄGÄ5Ä/ ³ ³ ³ ÍÍÍÍÍÍÏÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÏÍÍÍÍÍÍÍÍÍÍÍÍÍ ³ ³ ³ ÚÄÄÄÄÄÄ1 ÚÄÄÄÄÄÄ1 ÚÄÄÄÄÄÄ1 ³ ³ ³ ÀÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÙ ³ ³ ³ Termination Resistors ³ ³ ³ ³ ³ ÀÄ Parity Check Enable ³ ÀÄÄÄÄ Reserved ÀÄÄÄÄÄÄÄÄÄÄ Drive ID's, ID 0 (none) for single drive system ST - 325N UNFORMATTED CAPACITY (MB) ________________25 FORMATTED CAPACITY (32 SECTORS) (MB) _____21.4 ACTUATOR TYPE ____________________________STEPPER TRACKS ___________________________________1,308 CYLINDERS ________________________________654 HEADS ____________________________________2 DISCS ____________________________________1 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________RLL 2,7 INTERNAL TRANSFER RATE (mbits/sec) _______9.2 SPINDLE SPEED (RPM) ______________________3,600 AVERAGE LATENCY (mSEC) ___________________8.33 BUFFER ___________________________________2K or 8K INTERFACE ________________________________SCSI BYTES PER TRACK __________________________16,384 SECTORS PER DRIVE ________________________41,856 TPI (TRACKS PER INCH) ____________________1,015 BPI (BITS PER INCH) ______________________22,762 AVERAGE ACCESS (ms) ______________________28 SINGLE TRACK SEEK (ms) ___________________7 MTBF (power-on hours) ____________________50,000 POWER REQUIREMENTS: +12V START-UP (amps) _1.2 +5V TYPICAL (amps) ___0.26 POWER MANAGEMENT (Watts): ACTIVE _______________7.0 IDLE _________________2.4 STANDBY ______________1.4 SLEEP ________________ BUFFERED STEP PULSE RATE (micro sec) _____ WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl)________________________AUTO PARK IBM AT DRIVE TYPE ________________________0 Seagate reserves the right to change, without notice, product offerings or specifications. (5/6/91)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-1090N (94351-090) Swift SCSI ÚÄÄÄ\ ³ 0 ³ 5 ³ 0 ³ G ³ 0 ³ G ³ 0 ³ 12 .................... o o o o o o ÀÄÄÄ/ 1................... o o o o o o ÍÍÍÍÑÍÍÍÍÍÍÑÍÑÍÍÍÍÍÍÑÍÑÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍ 1ÄÄÄÄÄÄÙ 1ÄÄÄÄÄÄÙ 1ÄÄÄÄÄÄÙ 1 2 4 ³ ³ ³ Terminator Resistors ÄÄÂÄÄ ³ ³ ³ ³ ³ ³ ³ Terminator Power Select Drive ID, binary - use ÅÄÄÄÙ ³ ³ ³ Header located on the side ID 0 (no jumpers) for ³ ³ ³ ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ single drive install Ù ³ ³ ³ (Back) A B (Front of drive) Enable Parity Checking ÄÄÄÄÄÄÄÄÙ ³ ³ C D Enable Motor Start Option ÄÄÄÄÄÄÄÄÄÄÙ ³ ÍÍÑÍÍÍÍÍÍÍÍÍÍPÍWÍA Synchronized Spindle ÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÄÅÄ A-B Drive from Power Connector (factory default) A-C Drive from SCSI Bus A-C&B-D Drive from Power Connector and Provide to SCSI Bus B-D Only provide to SCSI Bus ST-1090N 94351-90 Swift UNFORMATTED CAPACITY (MB) ________________90 FORMATTED CAPACITY (29 SECTORS) (MB) _____79 ACTUATOR TYPE ____________________________VOICE COIL TRACKS ___________________________________7,476 CYLINDERS ________________________________1,068 HEADS ____________________________________5 DISCS ____________________________________3 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________RLL TRANSFER RATE (mbytes/sec) _______________1 SPINDLE SPEED (RPM) ______________________3,600 BUFFER ___________________________________32 or 64 Kbyte Read Look-Ahead, Non-Adaptive, Single-Segmented INTERFACE ________________________________SCSI TPI (TRACKS PER INCH) ____________________1,350 BPI (BITS PER INCH) ______________________22,840 AVERAGE ACCESS (ms) ______________________15 SINGLE TRACK SEEK (ms) ___________________4 MTBF (power-on hours) ____________________70,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.5 +12V TYPICAL (amps) __0.7 +5V START-UP (amps) __0.75 +5V TYPICAL (amps) ___0.4 TYPICAL (watts) ______11 MAXIMUM (watts) ______33.75 BUFFERED STEP PULSE RATE (micro sec) _____6-200 WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Already low-level formatted at the factory. Swift Remote LED Option Front View of Drive Without the Plastic Bezel ÚÄÄÄÂÄÄÄ¿ ³ A ³ B ³ B = Anode ÃÄÄÄÅÄÄÄ´ D = Cathode ³ C ³ D ³ ...ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÏÍÍÍÏÍÍÍÏÍÍÍÍÍPÍWÍAÍÍÍ... ø Default jumper at C-D for LED mounted on drive PWA ø To use remote LED, remove jumper and extend B (Anode) and D (Cathode). ø Swift LED kit 75912397 allows connection to a remote LED ø Swift LED kit 95913369 has an LED for attachment to the system front bezel or a 5.25-inch frame kit Seagate reserves the right to change, without notice, product offerings or specifications. (6/26/90)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-1096N SCSI /ÄÄÄ¿ ³ O ³12 ³ O ³G ³ O ³G o o o o o ³ O ³5 o o o o o \ÄÄÄÙ ÍÍÑÍÑÍÑÍÑÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ 1 2 4 ³ P ........................1 ÀÄÅÄÙ ³ ³ À.........................Ù ³ ³ ³ ÚÄÄÄÄÄÄ1ÚÄÄÄÄÄÄ1ÚÄÄÄÄÄÄ1 ³ ³ ³ ÀÄÄÄÄÄÄÙÀÄÄÄÄÄÄÙÀÄÄÄÄÄÄÙ ³ ³ ³ À Resistor Termination Packs ³ ³ ³ ³ ³ ÀÄ Parity Check enable ³ ÀÄÄÄ Not Used ÀÄÄÄÄÄÄÄ Drive ID's, ID 0 (none) for single drive system ST - 1096N UNFORMATTED CAPACITY (MB) ________________N/A FORMATTED CAPACITY (26 SECTORS) (MB) _____83.9 ACTUATOR TYPE ____________________________VOICE COIL TRACKS ___________________________________6,342 CYLINDERS ________________________________906 HEADS ____________________________________7 DISCS ____________________________________4 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________RLL (2,7) TRANSFER RATE (mbits/sec) ________________7.5 SPINDLE SPEED (RPM) ______________________3,600 AVERAGE LATENCY (mSEC) ___________________8.3 BUFFER ___________________________________2 Kbyte SeaCache INTERFACE ________________________________SCSI SECTORS PER DRIVE ________________________163,986 TPI (TRACKS PER INCH) ____________________1,300 BPI (BITS PER INCH) ______________________19,893 AVERAGE ACCESS (ms) ______________________20 SINGLE TRACK SEEK (ms) ___________________8 MAX FULL SEEK (ms) _______________________44 MTBF (power-on hours) ____________________150,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.0 +12V TYPICAL (amps) __0.5 +5V TYPICAL (amps) ___0.6 TYPICAL (watts) ______9 MAXIMUM (watts) ______33.75 BUFFERED STEP PULSE RATE (micro sec) _____3-200 WRITE PRECOMP (cyl) ______________________N/A (907) REDUCED WRITE CURRENT (cyl) ______________N/A (907) LANDING ZONE (cyl)________________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Seagate reserves the right to change, without notice, product offerings or specifications. (6/26/90)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-1111N (94351-111) Swift SCSI ÚÄÄÄ\ ³ 0 ³ 5 ³ 0 ³ G ³ 0 ³ G ³ 0 ³ 12 .................... o o o o o o ÀÄÄÄ/ 1................... o o o o o o ÍÍÍÍÑÍÍÍÍÍÍÑÍÑÍÍÍÍÍÍÑÍÑÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍ 1ÄÄÄÄÄÄÙ 1ÄÄÄÄÄÄÙ 1ÄÄÄÄÄÄÙ 1 2 4 ³ ³ ³ Terminator Resistors ÄÄÂÄÄ ³ ³ ³ ³ ³ ³ ³ Terminator Power Select Drive ID, binary - use ÅÄÄÄÙ ³ ³ ³ Header located on the side ID 0 (no jumpers) for ³ ³ ³ ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ single drive install Ù ³ ³ ³ (Back) A B (Front of drive) Enable Parity Checking ÄÄÄÄÄÄÄÄÙ ³ ³ C D Enable Motor Start Option ÄÄÄÄÄÄÄÄÄÄÙ ³ ÍÍÑÍÍÍÍÍÍÍÍÍÍPÍWÍA Synchronized Spindle ÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÄÅÄ A-B Drive from Power Connector (factory default) A-C Drive from SCSI Bus A-C&B-D Drive from Power Connector and Provide to SCSI Bus B-D Only provide to SCSI Bus ST-1111N 94351-111 Swift UNFORMATTED CAPACITY (MB) ________________111 FORMATTED CAPACITY (36 SECTORS) (MB) _____98 ACTUATOR TYPE ____________________________VOICE COIL TRACKS ___________________________________5,340 CYLINDERS ________________________________1,068 HEADS ____________________________________5 DISCS ____________________________________3 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________RLL TRANSFER RATE (mbytes/sec) _______________1.25 SPINDLE SPEED (RPM) ______________________3,600 BUFFER ___________________________________32 or 64 Kbyte Read Look-Ahead, Non-Adaptive, Single-Segmented INTERFACE ________________________________SCSI TPI (TRACKS PER INCH) ____________________1,350 BPI (BITS PER INCH) ______________________28,282 AVERAGE ACCESS (ms) ______________________15 SINGLE TRACK SEEK (ms) ___________________4 MTBF (power-on hours) ____________________70,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.5 +12V TYPICAL (amps) __0.7 +5V START-UP (amps) __0.75 +5V TYPICAL (amps) ___0.4 TYPICAL (watts) ______11 MAXIMUM (watts) ______33.75 BUFFERED STEP PULSE RATE (micro sec) _____6-200 WRITE PRECOMP (cyl) ______________________N/A (1069) REDUCED WRITE CURRENT (cyl) ______________N/A (1069) LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Already low-level formatted at the factory. Swift Remote LED Option Front View of Drive Without the Plastic Bezel ÚÄÄÄÂÄÄÄ¿ ³ A ³ B ³ B = Anode ÃÄÄÄÅÄÄÄ´ D = Cathode ³ C ³ D ³ ...ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÏÍÍÍÏÍÍÍÏÍÍÍÍÍPÍWÍAÍÍÍ... ø Default jumper at C-D for LED mounted on drive PWA ø To use remote LED, remove jumper and extend B (Anode) and D (Cathode). ø Swift LED kit 75912397 allows connection to a remote LED ø Swift LED kit 95913369 has an LED for attachment to the system front bezel or a 5.25-inch frame kit Seagate reserves the right to change, without notice, product offerings or specifications. (6/26/90)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-1126N (94351-126) Swift SCSI ÚÄÄÄ\ ³ 0 ³ 5 ³ 0 ³ G ³ 0 ³ G ³ 0 ³ 12 .................... o o o o o o ÀÄÄÄ/ 1................... o o o o o o ÍÍÍÍÑÍÍÍÍÍÍÑÍÑÍÍÍÍÍÍÑÍÑÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍ 1ÄÄÄÄÄÄÙ 1ÄÄÄÄÄÄÙ 1ÄÄÄÄÄÄÙ 1 2 4 ³ ³ ³ Terminator Resistors ÄÄÂÄÄ ³ ³ ³ ³ ³ ³ ³ Terminator Power Select Drive ID, binary - use ÅÄÄÄÙ ³ ³ ³ Header located on the side ID 0 (no jumpers) for ³ ³ ³ ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ single drive install Ù ³ ³ ³ (Back) A B (Front of drive) Enable Parity Checking ÄÄÄÄÄÄÄÄÙ ³ ³ C D Enable Motor Start Option ÄÄÄÄÄÄÄÄÄÄÙ ³ ÍÍÑÍÍÍÍÍÍÍÍÍÍPÍWÍA Synchronized Spindle ÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÄÅÄ A-B Drive from Power Connector (factory default) A-C Drive from SCSI Bus A-C&B-D Drive from Power Connector and Provide to SCSI Bus B-D Only provide to SCSI Bus Swift with Shrouded SCSI Connector ÚÄÄÄ\ ³ 0 ³ 5 ÚÄ If the SCSI connector has a plastic shroud, ³ 0 ³ G ³ note pin-1 on cable and T-res. ³ 0 ³ G ³ ³ 0 ³ 12 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» o o o o o o ÀÄÄÄ/ º:::::::::::::::::::1º o o o o o o ÍÍÍÍÑÍÍÍÍÍÍÑÍÑÍÍÍÍÍÍÑÍÑÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍ ÀÄÄÄÄÄÄ1 ÀÄÄÄÄÄÄ1 ÀÄÄÄÄÄÄ1 1 2 4 ³ ³ ³ Terminator Resistors ÄÄÂÄÄ ³ ³ ³ ³ ³ ³ ³ Terminator Power Select Drive ID, binary - use ÅÄÄÄÙ ³ ³ ³ Header located on the side ID 0 (no jumpers) for ³ ³ ³ ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ single drive install Ù ³ ³ ³ (Back) A B (Front of drive) Enable Parity Checking ÄÄÄÄÄÄÄÄÙ ³ ³ C D Enable Motor Start Option ÄÄÄÄÄÄÄÄÄÄÙ ³ ÍÍÑÍÍÍÍÍÍÍÍÍÍPÍWÍA Synchronized Spindle ÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÄÅÄ A-B Drive from Power Connector (factory default) A-C Drive from SCSI Bus A-C&B-D Drive from Power Connector and Provide to SCSI Bus B-D Only provide to SCSI Bus ST-1126N 94351-126 Swift UNFORMATTED CAPACITY (MB) ________________126 FORMATTED CAPACITY (29 SECTORS/1 SPARED)__107.0 ACTUATOR TYPE ____________________________VOICE COIL TRACKS ___________________________________7,476 CYLINDERS ________________________________1,068 HEADS ____________________________________7 DISCS ____________________________________4 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________RLL TRANSFER RATE (mbytes/sec) _______________1 SPINDLE SPEED (RPM) ______________________3,600 BUFFER ___________________________________32 or 64 Kbyte Read Look-Ahead, Non-Adaptive, Single-Segmented INTERFACE ________________________________SCSI TPI (TRACKS PER INCH) ____________________1,350 BPI (BITS PER INCH) ______________________22,840 AVERAGE ACCESS (ms) ______________________15 SINGLE TRACK SEEK (ms) ___________________4 MTBF (power-on hours) ____________________150,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.5 +12V TYPICAL (amps) __0.7 +5V START-UP (amps) __0.75 +5V TYPICAL (amps) ___0.4 TYPICAL (watts) ______11 MAXIMUM (watts) ______34 BUFFERED STEP PULSE RATE (micro sec) _____6-200 WRITE PRECOMP (cyl) ______________________N/A (1069) REDUCED WRITE CURRENT (cyl) ______________N/A (1069) LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Already low-level formatted at the factory. Swift Remote LED Option Front View of Drive Without the Plastic Bezel ÚÄÄÄÂÄÄÄ¿ ³ A ³ B ³ B = Anode ÃÄÄÄÅÄÄÄ´ D = Cathode ³ C ³ D ³ ...ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÏÍÍÍÏÍÍÍÏÍÍÍÍÍPÍWÍAÍÍÍ... ø Default jumper at C-D for LED mounted on drive PWA ø To use remote LED, remove jumper and extend B (Anode) and D (Cathode). ø Swift LED kit 75912397 allows connection to a remote LED ø Swift LED kit 95913369 has an LED for attachment to the system front bezel or a 5.25-inch frame kit Seagate reserves the right to change, without notice, product offerings or specifications. (6/26/90)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-1133NS (94351-133S) Swift SCSI ÚÄÄÄ\ ³ 0 ³ 5 ³ 0 ³ G ³ 0 ³ G ³ 0 ³ 12 .................... o o o o o o ÀÄÄÄ/ 1................... o o o o o o ÍÍÍÍÑÍÍÍÍÍÍÑÍÑÍÍÍÍÍÍÑÍÑÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍ 1ÄÄÄÄÄÄÙ 1ÄÄÄÄÄÄÙ 1ÄÄÄÄÄÄÙ 1 2 4 ³ ³ ³ Terminator Resistors ÄÄÂÄÄ ³ ³ ³ ³ ³ ³ ³ Terminator Power Select Drive ID, binary - use ÅÄÄÄÙ ³ ³ ³ Header located on the side ID 0 (no jumpers) for ³ ³ ³ ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ single drive install Ù ³ ³ ³ (Back) A B (Front of drive) Enable Parity Checking ÄÄÄÄÄÄÄÄÙ ³ ³ C D Enable Motor Start Option ÄÄÄÄÄÄÄÄÄÄÙ ³ ÍÍÑÍÍÍÍÍÍÍÍÍÍPÍWÍA Synchronized Spindle ÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÄÅÄ A-B Drive from Power Connector (factory default) A-C Drive from SCSI Bus A-C&B-D Drive from Power Connector and Provide to SCSI Bus B-D Only provide to SCSI Bus Swift with Shrouded SCSI Connector ÚÄÄÄ\ ³ 0 ³ 5 ÚÄ If the SCSI connector has a plastic shroud, ³ 0 ³ G ³ note pin-1 on cable and T-res. ³ 0 ³ G ³ ³ 0 ³ 12 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» o o o o o o ÀÄÄÄ/ º:::::::::::::::::::1º o o o o o o ÍÍÍÍÑÍÍÍÍÍÍÑÍÑÍÍÍÍÍÍÑÍÑÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍ ÀÄÄÄÄÄÄ1 ÀÄÄÄÄÄÄ1 ÀÄÄÄÄÄÄ1 4 2 1 ³ ³ ³ Terminator Resistors ÄÄÂÄÄ ³ ³ ³ ³ ³ ³ ³ Terminator Power Select Drive ID, binary - use ÅÄÄÄÙ ³ ³ ³ Header located on the side ID 0 (no jumpers) for ³ ³ ³ ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ single drive install Ù ³ ³ ³ (Back) A B (Front of drive) Enable Parity Checking ÄÄÄÄÄÄÄÄÙ ³ ³ C D Enable Motor Start Option ÄÄÄÄÄÄÄÄÄÄÙ ³ ÍÍÑÍÍÍÍÍÍÍÍÍÍPÍWÍA Synchronized Spindle ÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÄÅÄ A-B Drive from Power Connector (factory default) A-C Drive from SCSI Bus A-C&B-D Drive from Power Connector and Provide to SCSI Bus B-D Only provide to SCSI Bus ST-1133NS 94351-133S Swift UNFORMATTED CAPACITY (MB) ________________133 FORMATTED CAPACITY (36 SECTORS/1 SPARED)__113.4 ACTUATOR TYPE ____________________________VOICE COIL TRACKS ___________________________________6,340 CYLINDERS ________________________________1,268 HEADS ____________________________________5 DISCS ____________________________________3 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________RLL TRANSFER RATE (mbytes/sec) _______________1.25 SPINDLE SPEED (RPM) ______________________3,600 BUFFER ___________________________________32 or 64 Kbyte Read Look-Ahead, Non-Adaptive, Single-Segmented INTERFACE ________________________________SCSI TPI (TRACKS PER INCH) ____________________1,543 BPI (BITS PER INCH) ______________________30,000 max AVERAGE ACCESS (ms) ______________________15 SINGLE TRACK SEEK (ms) ___________________4 MTBF (power-on hours) ____________________150,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.5 +12V TYPICAL (amps) __0.7 +5V START-UP (amps) __0.75 +5V TYPICAL (amps) ___0.4 TYPICAL (watts) ______11 MAXIMUM (watts) ______34 BUFFERED STEP PULSE RATE (micro sec) _____6-200 WRITE PRECOMP (cyl) ______________________N/A (1269) REDUCED WRITE CURRENT (cyl) ______________N/A (1269) LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Already low-level formatted at the factory. Swift Remote LED Option Front View of Drive Without the Plastic Bezel ÚÄÄÄÂÄÄÄ¿ ³ A ³ B ³ B = Anode ÃÄÄÄÅÄÄÄ´ D = Cathode ³ C ³ D ³ ...ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÏÍÍÍÏÍÍÍÏÍÍÍÍÍPÍWÍAÍÍÍ... ø Default jumper at C-D for LED mounted on drive PWA ø To use remote LED, remove jumper and extend B (Anode) and D (Cathode). ø Swift LED kit 75912397 allows connection to a remote LED ø Swift LED kit 95913369 has an LED for attachment to the system front bezel or a 5.25-inch frame kit Seagate reserves the right to change, without notice, product offerings or specifications. (6/26/90)  SEAGATE TECHNOLOGY, INC. Technical Support Bulletin Board 408/438-8771 [300-9600 HST, MNP 3/5, N-8-1] (C)opyright 1990 Swift SCSI ST-1133NS (94351-133S) ÚÄÄÄ\ ³ O ³ 5 ³ O ³ G ³ O ³ G ³ O ³ 12 .................... o o o o o o ÀÄÄÄ/ 1................... o o o o o o ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ 4 2 1 ³ ³ ³ ÄÄÂÄÄ ³ ³ ÀÄ Synchronized Spindle Terminator Power Select ³ ³ ÀÄÄÄ Motor Control Header located on the side ³ ÀÄÄÄÄÄ Enable Parity Checking ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ÀÄÄÄÄÄÄÄÄÄ Drive ID, binary - use (Back) A B (Front of drive) ID 0 (no jumpers) for C D single drive install A-B Terminator power from Drive A-C Terminator power from Bus ST-1133NS 94351-133S Swift UNFORMATTED CAPACITY (MB) ________________133 FORMATTED CAPACITY (36 SECTORS) (MB) _____116 ACTUATOR TYPE ____________________________VOICE COIL TRACKS ___________________________________6,340 CYLINDERS ________________________________1,268 HEADS ____________________________________5 DISCS ____________________________________3 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________RLL TRANSFER RATE (mbytes/sec) _______________1.25 INTERFACE ________________________________SCSI TPI (TRACKS PER INCH) ____________________1,543 BPI (BITS PER INCH) ______________________30,000 max AVERAGE ACCESS (ms) ______________________15 SINGLE TRACK SEEK (ms) ___________________4 MTBF (power-on hours) ____________________70,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.5 +12V TYPICAL (amps) __0.7 +5V START-UP (amps) __0.75 +5V TYPICAL (amps) ___0.4 TYPICAL (watts) ______11 MAXIMUM (watts) ______34 BUFFERED STEP PULSE RATE (micro sec) _____6-200 WRITE PRECOMP (cyl) ______________________N/A (1269) REDUCED WRITE CURRENT (cyl) ______________N/A (1269) LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Already low-level formatted at the factory. Seagate reserves the right to change, without notice, product offerings or specifications. (6/26/90)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-1156N (94351-155) Swift SCSI ÚÄÄÄ\ ³ 0 ³ 5 ³ 0 ³ G ³ 0 ³ G ³ 0 ³ 12 .................... o o o o o o ÀÄÄÄ/ 1................... o o o o o o ÍÍÍÍÑÍÍÍÍÍÍÑÍÑÍÍÍÍÍÍÑÍÑÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍ 1ÄÄÄÄÄÄÙ 1ÄÄÄÄÄÄÙ 1ÄÄÄÄÄÄÙ 1 2 4 ³ ³ ³ Terminator Resistors ÄÄÂÄÄ ³ ³ ³ ³ ³ ³ ³ Terminator Power Select Drive ID, binary - use ÅÄÄÄÙ ³ ³ ³ Header located on the side ID 0 (no jumpers) for ³ ³ ³ ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ single drive install Ù ³ ³ ³ (Back) A B (Front of drive) Enable Parity Checking ÄÄÄÄÄÄÄÄÙ ³ ³ C D Enable Motor Start Option ÄÄÄÄÄÄÄÄÄÄÙ ³ ÍÍÑÍÍÍÍÍÍÍÍÍÍPÍWÍA Synchronized Spindle ÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÄÅÄ A-B Drive from Power Connector (factory default) A-C Drive from SCSI Bus A-C&B-D Drive from Power Connector and Provide to SCSI Bus B-D Only provide to SCSI Bus ST-1156N 94351-155 Swift UNFORMATTED CAPACITY (MB) ________________156 FORMATTED CAPACITY (36 SECTORS) (MB) _____138 ACTUATOR TYPE ____________________________VOICE COIL TRACKS ___________________________________7,476 CYLINDERS ________________________________1,068 HEADS ____________________________________7 DISCS ____________________________________4 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________RLL TRANSFER RATE (mbytes/sec) _______________1.25 SPINDLE SPEED (RPM) ______________________3,600 BUFFER ___________________________________32 or 64 Kbyte Read Look-Ahead, Non-Adaptive, Single-Segmented INTERFACE ________________________________SCSI TPI (TRACKS PER INCH) ____________________1,350 BPI (BITS PER INCH) ______________________28,282 AVERAGE ACCESS (ms) ______________________15 SINGLE TRACK SEEK (ms) ___________________4 MTBF (power-on hours) ____________________70,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.5 +12V TYPICAL (amps) __0.7 +5V START-UP (amps) __0.75 +5V TYPICAL (amps) ___0.4 TYPICAL (watts) ______11 MAXIMUM (watts) ______34 BUFFERED STEP PULSE RATE (micro sec) _____6-200 WRITE PRECOMP (cyl) ______________________N/A (1069) REDUCED WRITE CURRENT (cyl) ______________N/A (1069) LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Already low-level formatted at the factory. Swift Remote LED Option Front View of Drive Without the Plastic Bezel ÚÄÄÄÂÄÄÄ¿ ³ A ³ B ³ B = Anode ÃÄÄÄÅÄÄÄ´ D = Cathode ³ C ³ D ³ ...ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÏÍÍÍÏÍÍÍÏÍÍÍÍÍPÍWÍAÍÍÍ... ø Default jumper at C-D for LED mounted on drive PWA ø To use remote LED, remove jumper and extend B (Anode) and D (Cathode). ø Swift LED kit 75912397 allows connection to a remote LED ø Swift LED kit 95913369 has an LED for attachment to the system front bezel or a 5.25-inch frame kit Seagate reserves the right to change, without notice, product offerings or specifications. (6/26/90)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-1162N (94351-160) Swift SCSI ÚÄÄÄ\ ³ 0 ³ 5 ³ 0 ³ G ³ 0 ³ G ³ 0 ³ 12 .................... o o o o o o ÀÄÄÄ/ 1................... o o o o o o ÍÍÍÍÑÍÍÍÍÍÍÑÍÑÍÍÍÍÍÍÑÍÑÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍ 1ÄÄÄÄÄÄÙ 1ÄÄÄÄÄÄÙ 1ÄÄÄÄÄÄÙ 1 2 4 ³ ³ ³ Terminator Resistors ÄÄÂÄÄ ³ ³ ³ ³ ³ ³ ³ Terminator Power Select Drive ID, binary - use ÅÄÄÄÙ ³ ³ ³ Header located on the side ID 0 (no jumpers) for ³ ³ ³ ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ single drive install Ù ³ ³ ³ (Back) A B (Front of drive) Enable Parity Checking ÄÄÄÄÄÄÄÄÙ ³ ³ C D Enable Motor Start Option ÄÄÄÄÄÄÄÄÄÄÙ ³ ÍÍÑÍÍÍÍÍÍÍÍÍÍPÍWÍA Synchronized Spindle ÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÄÅÄ A-B Drive from Power Connector (factory default) A-C Drive from SCSI Bus A-C&B-D Drive from Power Connector and Provide to SCSI Bus B-D Only provide to SCSI Bus Swift with Shrouded SCSI Connector ÚÄÄÄ\ ³ 0 ³ 5 ÚÄ If the SCSI connector has a plastic shroud, ³ 0 ³ G ³ note pin-1 on cable and T-res. ³ 0 ³ G ³ ³ 0 ³ 12 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» o o o o o o ÀÄÄÄ/ º:::::::::::::::::::1º o o o o o o ÍÍÍÍÑÍÍÍÍÍÍÑÍÑÍÍÍÍÍÍÑÍÑÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍ ÀÄÄÄÄÄÄ1 ÀÄÄÄÄÄÄ1 ÀÄÄÄÄÄÄ1 1 2 4 ³ ³ ³ Terminator Resistors ÄÄÂÄÄ ³ ³ ³ ³ ³ ³ ³ Terminator Power Select Drive ID, binary - use ÅÄÄÄÙ ³ ³ ³ Header located on the side ID 0 (no jumpers) for ³ ³ ³ ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ single drive install Ù ³ ³ ³ (Back) A B (Front of drive) Enable Parity Checking ÄÄÄÄÄÄÄÄÙ ³ ³ C D Enable Motor Start Option ÄÄÄÄÄÄÄÄÄÄÙ ³ ÍÍÑÍÍÍÍÍÍÍÍÍÍPÍWÍA Synchronized Spindle ÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÄÅÄ A-B Drive from Power Connector (factory default) A-C Drive from SCSI Bus A-C&B-D Drive from Power Connector and Provide to SCSI Bus B-D Only provide to SCSI Bus ST-1162N 94351-160 Swift UNFORMATTED CAPACITY (MB) ________________162 FORMATTED CAPACITY (29 SECTORS/1 SPARED)__137.5 ACTUATOR TYPE ____________________________VOICE COIL TRACKS ___________________________________9,612 CYLINDERS ________________________________1,068 HEADS ____________________________________9 DISCS ____________________________________5 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________RLL TRANSFER RATE (mbytes/sec) _______________1 SPINDLE SPEED (RPM) ______________________3,600 BUFFER ___________________________________32 or 64 Kbyte Read Look-Ahead, Non-Adaptive, Single-Segmented INTERFACE ________________________________SCSI TPI (TRACKS PER INCH) ____________________1,350 BPI (BITS PER INCH) ______________________22,840 AVERAGE ACCESS (ms) ______________________15 SINGLE TRACK SEEK (ms) ___________________4 MTBF (power-on hours) ____________________70,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.5 +12V TYPICAL (amps) __0.7 +5V START-UP (amps) __0.75 +5V TYPICAL (amps) ___0.4 TYPICAL (watts) ______11 MAXIMUM (watts) ______34 BUFFERED STEP PULSE RATE (micro sec) _____6-200 WRITE PRECOMP (cyl) ______________________N/A (1069) REDUCED WRITE CURRENT (cyl) ______________N/A (1069) LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Already low-level formatted at the factory. Swift Remote LED Option Front View of Drive Without the Plastic Bezel ÚÄÄÄÂÄÄÄ¿ ³ A ³ B ³ B = Anode ÃÄÄÄÅÄÄÄ´ D = Cathode ³ C ³ D ³ ...ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÏÍÍÍÏÍÍÍÏÍÍÍÍÍPÍWÍAÍÍÍ... ø Default jumper at C-D for LED mounted on drive PWA ø To use remote LED, remove jumper and extend B (Anode) and D (Cathode). ø Swift LED kit 75912397 allows connection to a remote LED ø Swift LED kit 95913369 has an LED for attachment to the system front bezel or a 5.25-inch frame kit Seagate reserves the right to change, without notice, product offerings or specifications. (6/26/90)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-1186NS (94351-186S) Swift SCSI ÚÄÄÄ\ ³ 0 ³ 5 ³ 0 ³ G ³ 0 ³ G ³ 0 ³ 12 .................... o o o o o o ÀÄÄÄ/ 1................... o o o o o o ÍÍÍÍÑÍÍÍÍÍÍÑÍÑÍÍÍÍÍÍÑÍÑÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍ 1ÄÄÄÄÄÄÙ 1ÄÄÄÄÄÄÙ 1ÄÄÄÄÄÄÙ 1 2 4 ³ ³ ³ Terminator Resistors ÄÄÂÄÄ ³ ³ ³ ³ ³ ³ ³ Terminator Power Select Drive ID, binary - use ÅÄÄÄÙ ³ ³ ³ Header located on the side ID 0 (no jumpers) for ³ ³ ³ ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ single drive install Ù ³ ³ ³ (Back) A B (Front of drive) Enable Parity Checking ÄÄÄÄÄÄÄÄÙ ³ ³ C D Enable Motor Start Option ÄÄÄÄÄÄÄÄÄÄÙ ³ ÍÍÑÍÍÍÍÍÍÍÍÍÍPÍWÍA Synchronized Spindle ÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÄÅÄ A-B Drive from Power Connector (factory default) A-C Drive from SCSI Bus A-C&B-D Drive from Power Connector and Provide to SCSI Bus B-D Only provide to SCSI Bus Swift with Shrouded SCSI Connector ÚÄÄÄ\ ³ 0 ³ 5 ÚÄ If the SCSI connector has a plastic shroud, ³ 0 ³ G ³ note pin-1 on cable and T-res. ³ 0 ³ G ³ ³ 0 ³ 12 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» o o o o o o ÀÄÄÄ/ º:::::::::::::::::::1º o o o o o o ÍÍÍÍÑÍÍÍÍÍÍÑÍÑÍÍÍÍÍÍÑÍÑÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍ ÀÄÄÄÄÄÄ1 ÀÄÄÄÄÄÄ1 ÀÄÄÄÄÄÄ1 1 2 4 ³ ³ ³ Terminator Resistors ÄÄÂÄÄ ³ ³ ³ ³ ³ ³ ³ Terminator Power Select Drive ID, binary - use ÅÄÄÄÙ ³ ³ ³ Header located on the side ID 0 (no jumpers) for ³ ³ ³ ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ single drive install Ù ³ ³ ³ (Back) A B (Front of drive) Enable Parity Checking ÄÄÄÄÄÄÄÄÙ ³ ³ C D Enable Motor Start Option ÄÄÄÄÄÄÄÄÄÄÙ ³ ÍÍÑÍÍÍÍÍÍÍÍÍÍPÍWÍA Synchronized Spindle ÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÄÅÄ A-B Drive from Power Connector (factory default) A-C Drive from SCSI Bus A-C&B-D Drive from Power Connector and Provide to SCSI Bus B-D Only provide to SCSI Bus ST-1186NS 94351-186S Swift UNFORMATTED CAPACITY (MB) ________________186 FORMATTED CAPACITY (36 SECTORS/1 SPARED)__158.8 ACTUATOR TYPE ____________________________VOICE COIL TRACKS ___________________________________8,876 CYLINDERS ________________________________1,268 HEADS ____________________________________7 DISCS ____________________________________4 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________RLL (2,7) TRANSFER RATE (mbytes/sec) _______________1.25 SPINDLE SPEED (RPM) ______________________3,600 AVERAGE LATENCY (mSEC) ___________________8.33 BUFFER ___________________________________32 or 64 Kbyte Read Look-Ahead, Non-Adaptive, Single-Segmented INTERFACE ________________________________SCSI SECTORS PER DRIVE ________________________310,170 TPI (TRACKS PER INCH) ____________________1,543 BPI (BITS PER INCH) ______________________30,000 max AVERAGE ACCESS (ms) ______________________15 SINGLE TRACK SEEK (ms) ___________________4 MAX FULL SEEK (ms) _______________________35 MTBF (power-on hours) ____________________150,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.5 +12V TYPICAL (amps) __0.7 +5V START-UP (amps) __0.75 +5V TYPICAL (amps) ___0.4 TYPICAL (watts) ______11 MAXIMUM (watts) ______34 BUFFERED STEP PULSE RATE (micro sec) _____6-200 WRITE PRECOMP (cyl) ______________________N/A (1269) REDUCED WRITE CURRENT (cyl) ______________N/A (1269) LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Already low-level formatted at the factory. Swift Remote LED Option Front View of Drive Without the Plastic Bezel ÚÄÄÄÂÄÄÄ¿ ³ A ³ B ³ B = Anode ÃÄÄÄÅÄÄÄ´ D = Cathode ³ C ³ D ³ ...ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÏÍÍÍÏÍÍÍÏÍÍÍÍÍPÍWÍAÍÍÍ... ø Default jumper at C-D for LED mounted on drive PWA ø To use remote LED, remove jumper and extend B (Anode) and D (Cathode). ø Swift LED kit 75912397 allows connection to a remote LED ø Swift LED kit 95913369 has an LED for attachment to the system front bezel or a 5.25-inch frame kit Seagate reserves the right to change, without notice, product offerings or specifications. (6/26/90)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-1201N (94351-200) Swift SCSI ÚÄÄÄ\ ³ 0 ³ 5 ³ 0 ³ G ³ 0 ³ G ³ 0 ³ 12 .................... o o o o o o ÀÄÄÄ/ 1................... o o o o o o ÍÍÍÍÑÍÍÍÍÍÍÑÍÑÍÍÍÍÍÍÑÍÑÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍ 1ÄÄÄÄÄÄÙ 1ÄÄÄÄÄÄÙ 1ÄÄÄÄÄÄÙ 1 2 4 ³ ³ ³ Terminator Resistors ÄÄÂÄÄ ³ ³ ³ ³ ³ ³ ³ Terminator Power Select Drive ID, binary - use ÅÄÄÄÙ ³ ³ ³ Header located on the side ID 0 (no jumpers) for ³ ³ ³ ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ single drive install Ù ³ ³ ³ (Back) A B (Front of drive) Enable Parity Checking ÄÄÄÄÄÄÄÄÙ ³ ³ C D Enable Motor Start Option ÄÄÄÄÄÄÄÄÄÄÙ ³ ÍÍÑÍÍÍÍÍÍÍÍÍÍPÍWÍA Synchronized Spindle ÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÄÅÄ A-B Drive from Power Connector (factory default) A-C Drive from SCSI Bus A-C&B-D Drive from Power Connector and Provide to SCSI Bus B-D Only provide to SCSI Bus Swift with Shrouded SCSI Connector ÚÄÄÄ\ ³ 0 ³ 5 ÚÄ If the SCSI connector has a plastic shroud, ³ 0 ³ G ³ note pin-1 on cable and T-res. ³ 0 ³ G ³ ³ 0 ³ 12 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» o o o o o o ÀÄÄÄ/ º:::::::::::::::::::1º o o o o o o ÍÍÍÍÑÍÍÍÍÍÍÑÍÑÍÍÍÍÍÍÑÍÑÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍ ÀÄÄÄÄÄÄ1 ÀÄÄÄÄÄÄ1 ÀÄÄÄÄÄÄ1 1 2 4 ³ ³ ³ Terminator Resistors ÄÄÂÄÄ ³ ³ ³ ³ ³ ³ ³ Terminator Power Select Drive ID, binary - use ÅÄÄÄÙ ³ ³ ³ Header located on the side ID 0 (no jumpers) for ³ ³ ³ ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ single drive install Ù ³ ³ ³ (Back) A B (Front of drive) Enable Parity Checking ÄÄÄÄÄÄÄÄÙ ³ ³ C D Enable Motor Start Option ÄÄÄÄÄÄÄÄÄÄÙ ³ ÍÍÑÍÍÍÍÍÍÍÍÍÍPÍWÍA Synchronized Spindle ÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÄÅÄ A-B Drive from Power Connector (factory default) A-C Drive from SCSI Bus A-C&B-D Drive from Power Connector and Provide to SCSI Bus B-D Only provide to SCSI Bus ST-1201N 94351-200 Swift UNFORMATTED CAPACITY (MB) ________________201 FORMATTED CAPACITY (36 SECTORS/1 SPARED)__171.9 ACTUATOR TYPE ____________________________VOICE COIL TRACKS ___________________________________9,612 CYLINDERS ________________________________1,068 HEADS ____________________________________9 DISCS ____________________________________5 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________RLL (2,7) TRANSFER RATE (mbytes/sec) _______________1.25 SPINDLE SPEED (RPM) ______________________3,600 AVERAGE LATENCY (mSEC) ___________________8.33 BUFFER ___________________________________32 or 64 Kbyte Read Look-Ahead, Non-Adaptive, Single-Segmented INTERFACE ________________________________SCSI SECTORS PER DRIVE ________________________335,790 TPI (TRACKS PER INCH) ____________________1,350 BPI (BITS PER INCH) ______________________28,282 AVERAGE ACCESS (ms) ______________________15 SINGLE TRACK SEEK (ms) ___________________4 MAX FULL SEEK (ms) _______________________35 MTBF (power-on hours) ____________________150,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.5 +12V TYPICAL (amps) __0.7 +5V START-UP (amps) __0.75 +5V TYPICAL (amps) ___0.4 TYPICAL (watts) ______11 MAXIMUM (watts) ______34 BUFFERED STEP PULSE RATE (micro sec) _____6-200 WRITE PRECOMP (cyl) ______________________N/A (1069) REDUCED WRITE CURRENT (cyl) ______________N/A (1069) LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Already low-level formatted at the factory. Swift Remote LED Option Front View of Drive Without the Plastic Bezel ÚÄÄÄÂÄÄÄ¿ ³ A ³ B ³ B = Anode ÃÄÄÄÅÄÄÄ´ D = Cathode ³ C ³ D ³ ...ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÏÍÍÍÏÍÍÍÏÍÍÍÍÍPÍWÍAÍÍÍ... ø Default jumper at C-D for LED mounted on drive PWA ø To use remote LED, remove jumper and extend B (Anode) and D (Cathode). ø Swift LED kit 75912397 allows connection to a remote LED ø Swift LED kit 95913369 has an LED for attachment to the system front bezel or a 5.25-inch frame kit Seagate reserves the right to change, without notice, product offerings or specifications. (6/26/90)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-1239NS (94351-230S) Swift SCSI ÚÄÄÄ\ ³ 0 ³ 5 ³ 0 ³ G ³ 0 ³ G ³ 0 ³ 12 .................... o o o o o o ÀÄÄÄ/ 1................... o o o o o o ÍÍÍÍÑÍÍÍÍÍÍÑÍÑÍÍÍÍÍÍÑÍÑÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍ 1ÄÄÄÄÄÄÙ 1ÄÄÄÄÄÄÙ 1ÄÄÄÄÄÄÙ 1 2 4 ³ ³ ³ Terminator Resistors ÄÄÂÄÄ ³ ³ ³ ³ ³ ³ ³ Terminator Power Select Drive ID, binary - use ÅÄÄÄÙ ³ ³ ³ Header located on the side ID 0 (no jumpers) for ³ ³ ³ ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ single drive install Ù ³ ³ ³ (Back) A B (Front of drive) Enable Parity Checking ÄÄÄÄÄÄÄÄÙ ³ ³ C D Enable Motor Start Option ÄÄÄÄÄÄÄÄÄÄÙ ³ ÍÍÑÍÍÍÍÍÍÍÍÍÍPÍWÍA Synchronized Spindle ÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÄÅÄ A-B Drive from Power Connector (factory default) A-C Drive from SCSI Bus A-C&B-D Drive from Power Connector and Provide to SCSI Bus B-D Only provide to SCSI Bus Swift with Shrouded SCSI Connector ÚÄÄÄ\ ³ 0 ³ 5 ÚÄ If the SCSI connector has a plastic shroud, ³ 0 ³ G ³ note pin-1 on cable and T-res. ³ 0 ³ G ³ ³ 0 ³ 12 ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» o o o o o o ÀÄÄÄ/ º:::::::::::::::::::1º o o o o o o ÍÍÍÍÑÍÍÍÍÍÍÑÍÑÍÍÍÍÍÍÑÍÑÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍ ÀÄÄÄÄÄÄ1 ÀÄÄÄÄÄÄ1 ÀÄÄÄÄÄÄ1 1 2 4 ³ ³ ³ Terminator Resistors ÄÄÂÄÄ ³ ³ ³ ³ ³ ³ ³ Terminator Power Select Drive ID, binary - use ÅÄÄÄÙ ³ ³ ³ Header located on the side ID 0 (no jumpers) for ³ ³ ³ ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ single drive install Ù ³ ³ ³ (Back) A B (Front of drive) Enable Parity Checking ÄÄÄÄÄÄÄÄÙ ³ ³ C D Enable Motor Start Option ÄÄÄÄÄÄÄÄÄÄÙ ³ ÍÍÑÍÍÍÍÍÍÍÍÍÍPÍWÍA Synchronized Spindle ÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÄÅÄ A-B Drive from Power Connector (factory default) A-C Drive from SCSI Bus A-C&B-D Drive from Power Connector and Provide to SCSI Bus B-D Only provide to SCSI Bus ST-1239NS 94351-230S Swift UNFORMATTED CAPACITY (MB) ________________239 FORMATTED CAPACITY (36 SECTORS/1 SPARED)__204.2 ACTUATOR TYPE ____________________________VOICE COIL TRACKS ___________________________________11,412 CYLINDERS ________________________________1,268 HEADS ____________________________________9 DISCS ____________________________________5 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________RLL (2,7) TRANSFER RATE (mbytes/sec) _______________1.25 SPINDLE SPEED (RPM) ______________________3,600 AVERAGE LATENCY (mSEC) ___________________8.33 BUFFER ___________________________________32 or 64 Kbyte Read Look-Ahead, Non-Adaptive, Single-Segmented INTERFACE ________________________________SCSI SECTORS PER DRIVE ________________________398,790 TPI (TRACKS PER INCH) ____________________1,543 BPI (BITS PER INCH) ______________________30,000 max AVERAGE ACCESS (ms) ______________________15 SINGLE TRACK SEEK (ms) ___________________4 MAX FULL SEEK (ms) _______________________35 MTBF (power-on hours) ____________________150,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.5 +12V TYPICAL (amps) __0.7 +5V START-UP (amps) __0.75 +5V TYPICAL (amps) ___0.4 TYPICAL (watts) ______11 MAXIMUM (watts) ______34 BUFFERED STEP PULSE RATE (micro sec) _____6-200 WRITE PRECOMP (cyl) ______________________N/A (1269) REDUCED WRITE CURRENT (cyl) ______________N/A (1269) LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Already low-level formatted at the factory. Swift Remote LED Option Front View of Drive Without the Plastic Bezel ÚÄÄÄÂÄÄÄ¿ ³ A ³ B ³ B = Anode ÃÄÄÄÅÄÄÄ´ D = Cathode ³ C ³ D ³ ...ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÏÍÍÍÏÍÍÍÏÍÍÍÍÍPÍWÍAÍÍÍ... ø Default jumper at C-D for LED mounted on drive PWA ø To use remote LED, remove jumper and extend B (Anode) and D (Cathode). ø Swift LED kit 75912397 allows connection to a remote LED ø Swift LED kit 95913369 has an LED for attachment to the system front bezel or a 5.25-inch frame kit Seagate reserves the right to change, without notice, product offerings or specifications. (6/26/90)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-1400N SCSI-2 ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º ÈÍÍÍÍÍÍÍÍÍÍͼ 50 pin I/O Cable Connection ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ1¸ J4³:::::::::::::::::::::::::³ /ÄÄÄÄÄÄÄÄÄ\ ÍÏÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͳ 0 0 0 0 ³ÍÍ ÚÄÄÄÄÄÄ1 ÚÄÄÄÄÄÄ1 ÚÄÄÄÄÄÄ1 ÀÄ5ÄGÄGÄ12Ù ÀÄÄÄÄÄÄÙ ÀÄÄÄÂÄÄÙ ÀÄÄÄÄÄÄÙ ÀTerminating ResistorsÙ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º LEFT SIDE VIEW º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ 12345678 ÕÍÍÍÍÍÍÍ͸ FRONT J6³::::::::³ BACK OF ÍÍÍÍÍÍÍÍÍÍÏ1ÍÍÍÍÍÍÍÏÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ OF DRIVE ³³³³³³³³ DRIVE Factory Use Ù³³³³³³À Terminator Power (see below)³ Motor Start ÄÙ³³³³ÀÄ Terminator Power (see below)ÃÄÄ¿ Start Delay ÄÄÙ³³ÀÄÄ Reserved ³ Write Protect ÄÄÄÙÀÄÄÄ Parity ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄ¿ ³ Termination Power-source Table ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄ¿ ³ 7 8 7 8 7 8 ³ ³ ÖÄ· ÖÄ· ÖÄÄÄ· A Drive Supplies Own ³ ³ øºøº ºøºø ÓøÄø½ B Drive Supplies Bus ³ ³ øÓø½ Óø½ø ø ø C Bus Supplies Drive ³ ³ A B C ³ ÔÍÍÍÍÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º RIGHT SIDE VIEW º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ÕÍÍ1¸ BACK J5³:::³ FRONT OF ÍÍÍÍÍÏÍÍÍÏÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ OF DRIVE ³³³ DRIVE ID 4 ÄÙ³ÀÄ ID 1 If these ID jumpers are used, ID 2 then ID jumpers shown in front view ARE NOT USED. ÉÍÍÍÍÍÍÍÍÍÍÍÍ» º FRONT VIEW º ÈÍÍÍÍÍÍÍÍÍÍÍͼ If these ID jumper are used, ÕÍÍÍÍ͸ then ID jumpers shown in right side J7³:::::³ view ARE NOT USED. ÍÍÏ1ÍÍÍÍÏÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ ³³³³³ ID 1 Ù³³³À Remote LED ID 2 ÄÙ³ÀÄ Spindle Synchronization ID 4 ST - 1400N UNFORMATTED CAPACITY (MB) ________________383 FORMATTED CAPACITY (xx SECTORS) (MB) _____331* AVERAGE SECTORS PER TRACK ________________62 ACTUATOR TYPE ____________________________VOICE COIL TRACKS ___________________________________10,332 CYLINDERS ________________________________1476 (user) HEADS ____________________________________7 DISCS ____________________________________4 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec) _______17 to 25 SPINDLE SPEED (RPM) ______________________4,412 AVERAGE LATENCY (mSEC) ___________________6.8 BUFFER ___________________________________64 Kbyte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 BYTES PER TRACK __________________________28,830 avg. SECTORS PER DRIVE ________________________640,584 TPI (TRACKS PER INCH) ____________________1,760 BPI (BITS PER INCH) ______________________ AVERAGE ACCESS (ms) ______________________14 SINGLE TRACK SEEK (ms) ___________________2.5 MAX FULL SEEK (ms) _______________________26 MTBF (power-on hours) ____________________150,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.5 +12V TYPICAL (amps) __0.54 +5V TYPICAL (amps) ___0.53 TYPICAL (watts) ______9.1 MAXIMUM (watts) ______15 BUFFERED STEP PULSE RATE (micro sec) _____ WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl)________________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE * 512 bytes per sector, one spare sector per track, two spare cylinders per unit. Already low-level formatted at the factory. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (4/12/91)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-1401N SCSI-2 ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º ÈÍÍÍÍÍÍÍÍÍÍͼ 50 pin I/O Cable Connection ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ1¸ J4³:::::::::::::::::::::::::³ /ÄÄÄÄÄÄÄÄÄ\ ÍÏÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͳ 0 0 0 0 ³ÍÍ ÚÄÄÄÄÄÄ1 ÚÄÄÄÄÄÄ1 ÚÄÄÄÄÄÄ1 ÀÄ5ÄGÄGÄ12Ù ÀÄÄÄÄÄÄÙ ÀÄÄÄÂÄÄÙ ÀÄÄÄÄÄÄÙ ÀTerminating ResistorsÙ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º LEFT SIDE VIEW º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ 12345678 ÕÍÍÍÍÍÍÍ͸ FRONT J6³::::::::³ BACK OF ÍÍÍÍÍÍÍÍÍÍÏ1ÍÍÍÍÍÍÍÏÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ OF DRIVE ³³³³³³³³ DRIVE Factory Use Ù³³³³³³À Terminator Power (see below)³ Motor Start ÄÙ³³³³ÀÄ Terminator Power (see below)ÃÄÄ¿ Start Delay ÄÄÙ³³ÀÄÄ Reserved ³ Write Protect ÄÄÄÙÀÄÄÄ Parity ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄ¿ ³ Termination Power-source Table ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄ¿ ³ 7 8 7 8 7 8 ³ ³ ÖÄ· ÖÄ· ÖÄÄÄ· A Drive Supplies Own ³ ³ øºøº ºøºø ÓøÄø½ B Drive Supplies Bus ³ ³ øÓø½ Óø½ø ø ø C Bus Supplies Drive ³ ³ A B C ³ ÔÍÍÍÍÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º RIGHT SIDE VIEW º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ÕÍÍ1¸ BACK J5³:::³ FRONT OF ÍÍÍÍÍÏÍÍÍÏÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ OF DRIVE ³³³ DRIVE ID 4 ÄÙ³ÀÄ ID 1 If these ID jumpers are used, ID 2 then ID jumpers shown in front view ARE NOT USED. ÉÍÍÍÍÍÍÍÍÍÍÍÍ» º FRONT VIEW º ÈÍÍÍÍÍÍÍÍÍÍÍͼ If these ID jumper are used, ÕÍÍÍÍ͸ then ID jumpers shown in right side J7³:::::³ view ARE NOT USED. ÍÍÏ1ÍÍÍÍÏÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ ³³³³³ ID 1 Ù³³³À Remote LED ID 2 ÄÙ³ÀÄ Spindle Synchronization ID 4 ST - 1401N UNFORMATTED CAPACITY (MB) ________________390 FORMATTED CAPACITY (xx SECTORS) (MB) _____338* AVERAGE SECTORS PER TRACK ________________66 ACTUATOR TYPE ____________________________VOICE COIL TRACKS ___________________________________9,900 CYLINDERS ________________________________1,100 (user) HEADS ____________________________________9 DISCS ____________________________________5 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec) _______20 to 25 SPINDLE SPEED (RPM) ______________________4,412 AVERAGE LATENCY (mSEC) ___________________6.8 BUFFER ___________________________________64 Kbyte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 BYTES PER TRACK __________________________39,394 avg. SECTORS PER DRIVE ________________________653,400 TPI (TRACKS PER INCH) ____________________1760 BPI (BITS PER INCH) ______________________ AVERAGE ACCESS (ms) ______________________12 SINGLE TRACK SEEK (ms) ___________________2.5 MAX FULL SEEK (ms) _______________________24 MTBF (power-on hours) ____________________150,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.5 +12V TYPICAL (amps) __0.7 +5V TYPICAL (amps) ___0.7 TYPICAL (watts) ______9.1 MAXIMUM (watts) ______15 BUFFERED STEP PULSE RATE (micro sec) _____ WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl)________________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE * 512 bytes per sector, one spare sector per track, two spare cylinders per unit. Already low-level formatted at the factory. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (4/12/91)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-1480N SCSI-2 ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º ÈÍÍÍÍÍÍÍÍÍÍͼ 50 pin I/O Cable Connection ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ1¸ J4³:::::::::::::::::::::::::³ /ÄÄÄÄÄÄÄÄÄ\ ÍÏÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͳ 0 0 0 0 ³ÍÍ ÚÄÄÄÄÄÄ1 ÚÄÄÄÄÄÄ1 ÚÄÄÄÄÄÄ1 ÀÄ5ÄGÄGÄ12Ù ÀÄÄÄÄÄÄÙ ÀÄÄÄÂÄÄÙ ÀÄÄÄÄÄÄÙ ÀTerminating ResistorsÙ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º LEFT SIDE VIEW º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ 12345678 ÕÍÍÍÍÍÍÍ͸ FRONT J6³::::::::³ BACK OF ÍÍÍÍÍÍÍÍÍÍÏ1ÍÍÍÍÍÍÍÏÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ OF DRIVE ³³³³³³³³ DRIVE Factory Use Ù³³³³³³À Terminator Power (see below)³ Motor Start ÄÙ³³³³ÀÄ Terminator Power (see below)ÃÄÄ¿ Start Delay ÄÄÙ³³ÀÄÄ Reserved ³ Write Protect ÄÄÄÙÀÄÄÄ Parity ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄ¿ ³ Termination Power-source Table ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄ¿ ³ 7 8 7 8 7 8 ³ ³ ÖÄ· ÖÄ· ÖÄÄÄ· A Drive Supplies Own ³ ³ øºøº ºøºø ÓøÄø½ B Drive Supplies Bus ³ ³ øÓø½ Óø½ø ø ø C Bus Supplies Drive ³ ³ A B C ³ ÔÍÍÍÍÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º RIGHT SIDE VIEW º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ÕÍÍ1¸ BACK J5³:::³ FRONT OF ÍÍÍÍÍÏÍÍÍÏÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ OF DRIVE ³³³ DRIVE ID 4 ÄÙ³ÀÄ ID 1 If these ID jumpers are used, ID 2 then ID jumpers shown in front view ARE NOT USED. ÉÍÍÍÍÍÍÍÍÍÍÍÍ» º FRONT VIEW º ÈÍÍÍÍÍÍÍÍÍÍÍͼ If these ID jumper are used, ÕÍÍÍÍ͸ then ID jumpers shown in right side J7³:::::³ view ARE NOT USED. ÍÍÏ1ÍÍÍÍÏÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ ³³³³³ ID 1 Ù³³³À Remote LED ID 2 ÄÙ³ÀÄ Spindle Synchronization ID 4 ST - 1480N UNFORMATTED CAPACITY (MB) ________________492 FORMATTED CAPACITY (xx SECTORS) (MB) _____426* AVERAGE SECTORS PER TRACK ________________62 ACTUATOR TYPE ____________________________VOICE COIL TRACKS ___________________________________13,302 CYLINDERS ________________________________1476 (user) HEADS ____________________________________9 DISCS ____________________________________5 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR INTERNAL TRANSFER RATE (mbits/sec) _______17 to 25 SPINDLE SPEED (RPM) ______________________4,412 AVERAGE LATENCY (mSEC) ___________________6.8 BUFFER ___________________________________64 Kbyte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 BYTES PER TRACK __________________________37,037 avg SECTORS PER DRIVE ________________________823,608 TPI (TRACKS PER INCH) ____________________1760 BPI (BITS PER INCH) ______________________ AVERAGE ACCESS (ms) ______________________14 SINGLE TRACK SEEK (ms) ___________________2.5 MAX FULL SEEK (ms) _______________________26 MTBF (power-on hours) ____________________150,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.5 +12V TYPICAL (amps) __0.54 +5V TYPICAL (amps) ___0.53 TYPICAL (watts) ______9.1 MAXIMUM (watts) ______15 BUFFERED STEP PULSE RATE (micro sec) _____ WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl)________________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE * 512 bytes per sector, one spare sector per track, two spare cylinders per unit. Already low-level formatted at the factory. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (4/12/91)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-1481N SCSI-2 Fast ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º ÈÍÍÍÍÍÍÍÍÍÍͼ 50 pin I/O Cable Connection ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ1¸ J4³:::::::::::::::::::::::::³ /ÄÄÄÄÄÄÄÄÄ\ ÍÏÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͳ 0 0 0 0 ³ÍÍ ÚÄÄÄÄÄÄ1 ÚÄÄÄÄÄÄ1 ÚÄÄÄÄÄÄ1 ÀÄ5ÄGÄGÄ12Ù ÀÄÄÄÄÄÄÙ ÀÄÄÄÂÄÄÙ ÀÄÄÄÄÄÄÙ ÀTerminating ResistorsÙ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º LEFT SIDE VIEW º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ 12345678 ÕÍÍÍÍÍÍÍ͸ FRONT J6³::::::::³ BACK OF ÍÍÍÍÍÍÍÍÍÍÏ1ÍÍÍÍÍÍÍÏÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ OF DRIVE ³³³³³³³³ DRIVE Factory Use Ù³³³³³³À Terminator Power (see below)³ Motor Start ÄÙ³³³³ÀÄ Terminator Power (see below)ÃÄÄ¿ Start Delay ÄÄÙ³³ÀÄÄ Reserved ³ Write Protect ÄÄÄÙÀÄÄÄ Parity ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄ¿ ³ Termination Power-source Table ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄ¿ ³ 7 8 7 8 7 8 ³ ³ ÖÄ· ÖÄ· ÖÄÄÄ· A Drive Supplies Own ³ ³ øºøº ºøºø ÓøÄø½ B Drive Supplies Bus ³ ³ øÓø½ Óø½ø ø ø C Bus Supplies Drive ³ ³ A B C ³ ÔÍÍÍÍÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º RIGHT SIDE VIEW º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ÕÍÍ1¸ BACK J5³:::³ FRONT OF ÍÍÍÍÍÏÍÍÍÏÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ OF DRIVE ³³³ DRIVE ID 4 ÄÙ³ÀÄ ID 1 If these ID jumpers are used, ID 2 then ID jumpers shown in front view ARE NOT USED. ÉÍÍÍÍÍÍÍÍÍÍÍÍ» º FRONT VIEW º ÈÍÍÍÍÍÍÍÍÍÍÍͼ If these ID jumper are used, ÕÍÍÍÍ͸ then ID jumpers shown in right side J7³:::::³ view ARE NOT USED. ÍÍÏ1ÍÍÍÍÏÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ ³³³³³ ID 1 Ù³³³À Remote LED ID 2 ÄÙ³ÀÄ Spindle Synchronization ID 4 ST - 1481N UNFORMATTED CAPACITY (MB) ________________492 FORMATTED CAPACITY (xx SECTORS) (MB) _____426 AVERAGE SECTORS PER TRACK ________________62 ACTUATOR TYPE ____________________________VOICE COIL TRACKS ___________________________________13,302 CYLINDERS ________________________________1,476 HEADS ____________________________________9 DISCS (3.5 in) ___________________________5 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec) _______17 to 25 SPINDLE SPEED (RPM) ______________________4,412 AVERAGE LATENCY (mSEC) ___________________6.8 BUFFER ___________________________________256 Kbyte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 Fast SECTORS PER DRIVE ________________________823,608 TPI (TRACKS PER INCH) ____________________1760 BPI (BITS PER INCH) ______________________ AVERAGE ACCESS (ms) ______________________14 SINGLE TRACK SEEK (ms) ___________________2.5 MAX FULL SEEK (ms) _______________________26 MTBF (power-on hours) ____________________150,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.5 +12V TYPICAL (amps) __0.54 +5V TYPICAL (amps) ___0.53/0.8(ND) TYPICAL (watts) ______9/11.0(ND) MAXIMUM (watts) ______15 WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl)________________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Already low-level formatted at the factory. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (4/12/91)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-1581N SCSI-2 Fast ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º ÈÍÍÍÍÍÍÍÍÍÍͼ 50 pin I/O Cable Connection ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ1¸ J4³:::::::::::::::::::::::::³ /ÄÄÄÄÄÄÄÄÄ\ ÍÏÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͳ 0 0 0 0 ³ÍÍ ÚÄÄÄÄÄÄ1 ÚÄÄÄÄÄÄ1 ÚÄÄÄÄÄÄ1 ÀÄ5ÄGÄGÄ12Ù ÀÄÄÄÄÄÄÙ ÀÄÄÄÂÄÄÙ ÀÄÄÄÄÄÄÙ ÀTerminating ResistorsÙ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º LEFT SIDE VIEW º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ 12345678 ÕÍÍÍÍÍÍÍ͸ FRONT J6³::::::::³ BACK OF ÍÍÍÍÍÍÍÍÍÍÏ1ÍÍÍÍÍÍÍÏÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ OF DRIVE ³³³³³³³³ DRIVE Factory Use Ù³³³³³³À Terminator Power (see below)³ Motor Start ÄÙ³³³³ÀÄ Terminator Power (see below)ÃÄÄ¿ Start Delay ÄÄÙ³³ÀÄÄ Reserved ³ Write Protect ÄÄÄÙÀÄÄÄ Parity ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄ¿ ³ Termination Power-source Table ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄ¿ ³ 7 8 7 8 7 8 ³ ³ ÖÄ· ÖÄ· ÖÄÄÄ· A Drive Supplies Own ³ ³ øºøº ºøºø ÓøÄø½ B Drive Supplies Bus ³ ³ øÓø½ Óø½ø ø ø C Bus Supplies Drive ³ ³ A B C ³ ÔÍÍÍÍÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º RIGHT SIDE VIEW º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ÕÍÍ͸ BACK J5³:::³ FRONT OF ÍÍÍÍÍÏÍÍÍÏÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ OF DRIVE ³³³ DRIVE ID 4 ÄÙ³ÀÄ ID 1 If these ID jumpers are used, ID 2 then ID jumpers shown in front view ARE NOT USED. ÉÍÍÍÍÍÍÍÍÍÍÍÍ» º FRONT VIEW º ÈÍÍÍÍÍÍÍÍÍÍÍͼ If these ID jumper are used, ÕÍÍÍÍ͸ then ID jumpers shown in right side J7³:::::³ view ARE NOT USED. ÍÍÏ1ÍÍÍÍÏÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ ³³³³³ ID 1 Ù³³³À Remote LED ID 2 ÄÙ³ÀÄ Spindle Synchronization ID 4 ST - 1581N UNFORMATTED CAPACITY (MB) ________________613 FORMATTED CAPACITY (xx SECTORS) (MB) _____525 AVERAGE SECTORS PER TRACK ________________77 ACTUATOR TYPE ____________________________VOICE COIL TRACKS ___________________________________13,302 CYLINDERS ________________________________1,476 HEADS ____________________________________9 DISCS (3.5 in) ___________________________5 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec) _______20 to 32 SPINDLE SPEED (RPM) ______________________4,412 AVERAGE LATENCY (mSEC) ___________________6.8 BUFFER ___________________________________256 Kbyte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 Fast SECTOR PER DRIVE _________________________1,022,868 TPI (TRACKS PER INCH) ____________________1760 BPI (BITS PER INCH) ______________________ AVERAGE ACCESS (ms) ______________________14 SINGLE TRACK SEEK (ms) ___________________2.5 MAX FULL SEEK (ms) _______________________26 MTBF (power-on hours) ____________________150,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.5 +12V TYPICAL (amps) __0.54 +5V TYPICAL (amps) ___0.53/0.8(ND) TYPICAL (watts) ______9/11.0(ND) MAXIMUM (watts) ______15 WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl)________________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Already low-level formatted at the factory. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (4/12/91)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1993 ST-1830N SCSI-2 Fast ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º ÈÍÍÍÍÍÍÍÍÍÍͼ 50 pin I/O Cable Connection ³ J1ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ1¸ /ÄÄÄÄÄÄÄÄÄ\ TOP (HDA) ͵:::::::::::::::::::::::::Æͳ 0 0 0 0 ³ÍÍ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÀÄ5ÄGÄGÄ12Ù BOTTOM 1ÄÄÄÄÄÄ¿ 1ÄÄÄÄÄÄ¿ 1ÄÄÄÄÄÄ¿ ÀÄÄÄÄÄÄÙ ÀÄÄÄÂÄÄÙ ÀÄÄÄÄÄÄÙ ÀTerminating ResistorsÙ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º RIGHT SIDE VIEW º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ BACK Õ͸ J2 12345678 TOP (HDA) FRONT OF J1ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ OF DRIVE Ô; :::::::: BOTTOM DRIVE ³³³³³³³³ ³Terminator Power Ù³³³³³³À Reserved Ú´Terminator Power ÄÙ³³³³ÀÄ Start Delay (12 secs * ID) ³ Factory Use ÄÄÙ³³ÀÄÄ Motor Start ³ Parity Enable ÄÄÄÙÀÄÄÄ Write Protect ³ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÀÄ´ Termination Power-source Table ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ÍÍÍÍÍ....ÍÍÍÍÍ....ÍÍÍÍÍPWA edgeÍÍÍÍÍ ³ ³ ³ ³ 1 2 1 2 1 2 ³ ³ ÖÄ· ÖÄ· ÖÄÄÄ· A Drive Supplies Bus ³ ³ ºøºø øºøº ÓøÄø½ B Drive Supplies Own ³ ³ Óø½ø øÓø½ ø ø C Bus Supplies Drive ³ ³ A B C ³ ÀÄÄÄÄÄÄÄÄÄDefaultÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º LEFT SIDE VIEW º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ If these ID jumpers are used, then ID jumpers shown in front view ARE NOT USED. FRONT TOP (HDA) J5 ÕÍÍ1¸ Õ͸BACK OF ÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵:::Æ͵J1 OF DRIVE BOTTOM ÔÍÍ; Ô;DRIVE ³³³ Note: On early drives ³ ID 1 ÄÙ³ÀÄ ID 4 with PCB# 75782395 or ³ ID 2 #75782485 ID jumpers areÃÄÄ ID 4 ID 1 reversed. ³ ÉÍÍÍÍÍÍÍÍÍÍÍÍ» º FRONT VIEW º ÈÍÍÍÍÍÍÍÍÍÍÍͼ TOP (HDA) J6 ÕÍÍÍÍÍ1¸ ÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵::::::ÆÍ * BOTTOM ÔÍÍÍÍÍ; ³ 123456 LED ÄÙ ³³³³³³ ID 4 Ù³³³³À Reserved ID 2 ÄÙ³³ÀÄ Remote LED (pin-3 +5v) ID 1 ÄÄÙÀÄÄ Spindle Synchronization (pin-6 REF SIG+) If these ID jumper are used, then ID jumpers shown in left side view ARE NOT USED. ST - 1830N UNFORMATTED CAPACITY (MB) ________________834 FORMATTED CAPACITY (xx SECTORS) (MB) _____702 AVERAGE SECTORS PER TRACK ________________79 ACTUATOR TYPE ____________________________VOICE COIL TRACKS ___________________________________17,225 CYLINDERS ________________________________1,325 (user) HEADS ____________________________________13 DISCS (3.5 in) ___________________________7 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec) _______28.4 to 41.2 EXTERNAL TRANSFER RATE (mbyte/sec) _______4 Async EXTERNAL TRANSFER RATE (mbyte/sec) _______10 Sync SPINDLE SPEED (RPM) ______________________4,535 AVERAGE LATENCY (mSEC) ___________________6.61 BUFFER ___________________________________256 Kbyte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 Fast BYTES PER TRACK __________________________48,419 avg. TPI (TRACKS PER INCH) ____________________2,150 AVERAGE ACCESS (ms) (read/write)__________TBD Drive level without controller overhead SINGLE TRACK SEEK (ms) ___________________TBD MAX FULL SEEK (ms) _______________________TBD MTBF (power-on hours) ____________________200,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.0 +12V TYPICAL (amps) __0.5 +5V TYPICAL (amps) ___0.4 TYPICAL (watts) ______11 IDLE (watts) _________9 LANDING ZONE (cyl)________________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Already low-level formatted at the factory. ZBR = Zone Bit Recording = Variable sectors per track Formatted at the factory with 1 spare sector per track and two spare cylinders at inner tracks per unit. Seagate reserves the right to change, without notice, product offerings or specifications. (10/12/93) SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1993 ST-1950N SCSI-2 Fast ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º ÈÍÍÍÍÍÍÍÍÍÍͼ 50 pin I/O Cable Connection ³ J1ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ1¸ /ÄÄÄÄÄÄÄÄÄ\ TOP (HDA) ͵:::::::::::::::::::::::::Æͳ 0 0 0 0 ³ÍÍ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÀÄ5ÄGÄGÄ12Ù BOTTOM 1ÄÄÄÄÄÄ¿ 1ÄÄÄÄÄÄ¿ 1ÄÄÄÄÄÄ¿ ÀÄÄÄÄÄÄÙ ÀÄÄÄÂÄÄÙ ÀÄÄÄÄÄÄÙ ÀTerminating ResistorsÙ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º RIGHT SIDE VIEW º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ BACK Õ͸ J2 12345678 TOP (HDA) FRONT OF J1ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ OF DRIVE Ô; :::::::: BOTTOM DRIVE ³³³³³³³³ ³Terminator Power Ù³³³³³³À Reserved Ú´Terminator Power ÄÙ³³³³ÀÄ Start Delay (12 secs * ID) ³ Factory Use ÄÄÙ³³ÀÄÄ Motor Start ³ Parity Enable ÄÄÄÙÀÄÄÄ Write Protect ³ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÀÄ´ Termination Power-source Table ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ÍÍÍÍÍ....ÍÍÍÍÍ....ÍÍÍÍÍPWA edgeÍÍÍÍÍ ³ ³ ³ ³ 1 2 1 2 1 2 ³ ³ ÖÄ· ÖÄ· ÖÄÄÄ· A Drive Supplies Bus ³ ³ ºøºø øºøº ÓøÄø½ B Drive Supplies Own ³ ³ Óø½ø øÓø½ ø ø C Bus Supplies Drive ³ ³ A B C ³ ÀÄÄÄÄÄÄÄÄÄDefaultÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º LEFT SIDE VIEW º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ If these ID jumpers are used, then ID jumpers shown in front view ARE NOT USED. FRONT TOP (HDA) J5 ÕÍÍ1¸ Õ͸BACK OF ÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵:::Æ͵J1 OF DRIVE BOTTOM ÔÍÍ; Ô;DRIVE ³³³ Note: On early drives ³ ID 1 ÄÙ³ÀÄ ID 4 with PCB# 75782395 or ³ ID 2 #75782485 ID jumpers areÃÄÄ ID 4 ID 1 reversed. ³ ÉÍÍÍÍÍÍÍÍÍÍÍÍ» º FRONT VIEW º ÈÍÍÍÍÍÍÍÍÍÍÍͼ TOP (HDA) J6 ÕÍÍÍÍÍ1¸ ÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵::::::ÆÍ * BOTTOM ÔÍÍÍÍÍ; ³ 123456 LED ÄÙ ³³³³³³ ID 4 Ù³³³³À Reserved ID 2 ÄÙ³³ÀÄ Remote LED (pin-3 +5v) ID 1 ÄÄÙÀÄÄ Spindle Synchronization (pin-6 REF SIG+) If these ID jumper are used, then ID jumpers shown in left side view ARE NOT USED. ST - 1950N UNFORMATTED CAPACITY (MB) ________________953 FORMATTED CAPACITY (xx SECTORS) (MB) _____803 AVERAGE SECTORS PER TRACK ________________76 ACTUATOR TYPE ____________________________VOICE COIL TRACKS ___________________________________20,475 CYLINDERS ________________________________1,575 (user) HEADS ____________________________________13 DISCS (3.5 in) ___________________________7 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec) _______25.2 to 41.2 EXTERNAL TRANSFER RATE (mbyte/sec) _______4 Async EXTERNAL TRANSFER RATE (mbyte/sec) _______10 Sync SPINDLE SPEED (RPM) ______________________4,535 AVERAGE LATENCY (mSEC) ___________________6.61 BUFFER ___________________________________256 Kbyte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 Fast BYTES PER TRACK __________________________46,550 avg. TPI (TRACKS PER INCH) ____________________2,150 AVERAGE ACCESS (ms) (read/write)__________TBD Drive level without controller overhead SINGLE TRACK SEEK (ms) ___________________TBD MAX FULL SEEK (ms) _______________________TBD MTBF (power-on hours) ____________________200,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.0 +12V TYPICAL (amps) __0.5 +5V TYPICAL (amps) ___0.4 TYPICAL (watts) ______11 IDLE (watts) _________9 LANDING ZONE (cyl)________________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Already low-level formatted at the factory. ZBR = Zone Bit Recording = Variable sectors per track Formatted at the factory with 1 spare sector per track and two spare cylinders at inner tracks per unit. Seagate reserves the right to change, without notice, product offerings or specifications. (10/12/93) SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1993 ST-1980N SCSI-2 Fast (Hawk 1) ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º ÈÍÍÍÍÍÍÍÍÍÍͼ 50 pin I/O Cable Connection ³ J1ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ1¸ /ÄÄÄÄÄÄÄÄÄ\ TOP (HDA) ͵:::::::::::::::::::::::::Æͳ 0 0 0 0 ³ÍÍ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÀÄ5ÄGÄGÄ12Ù BOTTOM 1ÄÄÄÄÄÄ¿ 1ÄÄÄÄÄÄ¿ 1ÄÄÄÄÄÄ¿ ÀÄÄÄÄÄÄÙ ÀÄÄÄÂÄÄÙ ÀÄÄÄÄÄÄÙ ÀTerminating ResistorsÙ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º RIGHT SIDE VIEW º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ BACK Õ͸ J2 12345678 TOP (HDA) FRONT OF J1ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ OF DRIVE Ô; :::::::: BOTTOM DRIVE ³³³³³³³³ ³Terminator Power Ù³³³³³³À Reserved Ú´Terminator Power ÄÙ³³³³ÀÄ Start Delay (12 secs * ID) ³ Factory Use ÄÄÙ³³ÀÄÄ Motor Start ³ Parity Enable ÄÄÄÙÀÄÄÄ Write Protect ³ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÀÄ´ Termination Power-source Table ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ÍÍÍÍÍ....ÍÍÍÍÍ....ÍÍÍÍÍPWA edgeÍÍÍÍÍ ³ ³ ³ ³ 1 2 1 2 1 2 ³ ³ ÖÄ· ÖÄ· ÖÄÄÄ· A Drive Supplies Bus ³ ³ ºøºø øºøº ÓøÄø½ B Drive Supplies Own ³ ³ Óø½ø øÓø½ ø ø C Bus Supplies Drive ³ ³ A B C ³ ÀÄÄÄÄÄÄÄÄÄDefaultÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º LEFT SIDE VIEW º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ If these ID jumpers are used, then ID jumpers shown in front view ARE NOT USED. FRONT TOP (HDA) J5 ÕÍÍ1¸ Õ͸BACK OF ÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵:::Æ͵J1 OF DRIVE BOTTOM ÔÍÍ; Ô;DRIVE ³³³ Note: On early drives ³ ID 1 ÄÙ³ÀÄ ID 4 with PCB# 75782395 or ³ ID 2 #75782485 ID jumpers areÃÄÄ ID 4 ID 1 reversed. ³ ÉÍÍÍÍÍÍÍÍÍÍÍÍ» º FRONT VIEW º ÈÍÍÍÍÍÍÍÍÍÍÍͼ TOP (HDA) J6 ÕÍÍÍÍÍ1¸ ÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵::::::ÆÍ * BOTTOM ÔÍÍÍÍÍ; ³ 123456 LED ÄÙ ³³³³³³ ID 4 Ù³³³³À Reserved ID 2 ÄÙ³³ÀÄ Remote LED (pin-3 +5v) ID 1 ÄÄÙÀÄÄ Spindle Synchronization (pin-6 REF SIG+) If these ID jumper are used, then ID jumpers shown in left side view ARE NOT USED. ST - 1980N Hawk 1 UNFORMATTED CAPACITY (MB) ________________1,021 FORMATTED CAPACITY (xx SECTORS) (MB) _____860 AVERAGE SECTORS PER TRACK ________________74 ACTUATOR TYPE ____________________________VOICE COIL TRACKS ___________________________________22,490 CYLINDERS ________________________________1,730 (user) HEADS ____________________________________13 DISCS (3.5 in) ___________________________7 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec) _______24.4 to 40.6 EXTERNAL TRANSFER RATE (mbyte/sec) _______4 Async EXTERNAL TRANSFER RATE (mbyte/sec) _______10 Sync SPINDLE SPEED (RPM) ______________________5,411 AVERAGE LATENCY (mSEC) ___________________5.4 BUFFER ___________________________________256 Kbyte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 Fast BYTES PER TRACK __________________________45,434 avg. TPI (TRACKS PER INCH) ____________________2,150 AVERAGE ACCESS (ms) (read/write)__________9.9/10.6 Drive level without controller overhead SINGLE TRACK SEEK (ms) ___________________1.5/2.0 MAX FULL SEEK (ms) _______________________19.0/20.0 MTBF (power-on hours) ____________________200,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.0 +12V TYPICAL (amps) __0.5 +5V TYPICAL (amps) ___0.4 TYPICAL (watts) ______11 IDLE (watts) _________9 LANDING ZONE (cyl)________________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Already low-level formatted at the factory. ZBR = Zone Bit Recording = Variable sectors per track Formatted at the factory with 1 spare sector per track and two spare cylinders at inner tracks per unit. Seagate reserves the right to change, without notice, product offerings or specifications. (08/09/94) SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-2106N (94211-106) Wren 3 HH SCSI 4 2 1 P Ú12ÄGÄGÄ5Ä¿ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ A B C D E F G H o o o o ³ 0 0 0 0 ³ Power ³:SCSI:Cable::::pin 1³ o o o o o o o o o o o o \Ä1Ä2Ä3Ä4Ä/ ÍÏÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÏÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ ³ ³ A-B Not used ³ ÀÄ Parity check B-C Terminator power from Bus ÀÄÄÄÄÄ Drive Select ID C-D Terminator power from Drive D-E Not used E-F Not used F-G Continuous test seeks G-H Motor Start option enable ST-2106N 94211-106 WREN 3 HH UNFORMATTED CAPACITY (MB) ________________106 FORMATTED CAPACITY (36 SECTORS) (MB) _____91 ACTUATOR TYPE ____________________________VOICE COIL TRACKS ___________________________________5,120 CYLINDERS ________________________________1,022 HEADS ____________________________________5 DISCS ____________________________________3 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________RLL (2,7) TRANSFER RATE (mbytes/sec) _______________1.25 SPINDLE SPEED (RPM) ______________________3,600 AVERAGE LATENCY (mSEC) ___________________8.33 BUFFER ___________________________________8 or 32 Kbyte 8 Kbyte: FIFO, Non-Adaptive, Single-Segmented Buffer 32 Kbyte: Read Look-Ahead, Non-Adaptive, Single-Segmented Buffer INTERFACE ________________________________SCSI TPI (TRACKS PER INCH) ____________________960 BPI (BITS PER INCH) ______________________19,058 AVERAGE ACCESS (ms) ______________________18 SINGLE TRACK SEEK (ms) ___________________4 MAX FULL SEEK (ms) _______________________35 MTBF (power-on hours) ____________________100,000 POWER REQUIREMENTS: +12V START-UP (amps) _4.5 +12V TYPICAL (amps) __1.0 +5V START-UP (amps) __1.7 +5V TYPICAL (amps) ___1.0 TYPICAL (watts) ______18 MAXIMUM (watts) ______63 BUFFERED STEP PULSE RATE (micro sec) _____N/A WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Already low-level formatted at the factory. Seagate reserves the right to change, without notice, product offerings or specifications. (6/26/90)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-2125N (94221-125) Wren 5 HH SCSI Power SCSI Cable 4 2 1 P Ú12ÄGÄGÄ5Ä¿ ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ A B C D E F G H o o o o ³ 0 0 0 0 ³ ³:::::::::::::::::::1³ o o o o o o o o o o o o \ÄÄÄÄÄÄÄÄÄ/ ÍÏÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÏÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ ³ ³ Ú¿ Ú¿ Ú¿ A-B Not used ³ ³ ³³ ³³ ³³ B-C Terminator power from Bus ³ ³ ³³ ³³ ³³ C-D Terminator power from Drive ³ ³ À1 À1 À1 D-E Not used ³ ³ Terminator E-F Not used ³ ³ SIPs, pin-1 F-G Continuous test seeks ³ ³ toward rear. G-H Motor Start option enable ³ ³ ³ ÀÄ Parity check ³ Drive Select ID Ù (ID 0 for single drive system) ST-2125N 94221-125/M WREN 5 HH UNFORMATTED CAPACITY (MB) ________________125 FORMATTED CAPACITY (xx SECTORS) (MB) _____107 AVERAGE SECTORS PER TRACK ________________45 ACTUATOR TYPE ____________________________VOICE COIL TRACKS ___________________________________4632 CYLINDERS ________________________________1544 HEADS ____________________________________3 DISCS ____________________________________2 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (2,7) TRANSFER RATE (mbytes/sec) _______________1.125-1.875 SPINDLE SPEED (RPM) ______________________3,600 AVERAGE LATENCY (mSEC) ___________________8.33 BUFFER ___________________________________32 Kbyte Read Look-Ahead, Non-Adaptive, Single-Segmented Buffer INTERFACE ________________________________SCSI TPI (TRACKS PER INCH) ____________________1280 BPI (BITS PER INCH) ______________________19213 AVERAGE ACCESS (ms) ______________________18 SINGLE TRACK SEEK (ms) ___________________4 MAX FULL SEEK (ms) _______________________40 MTBF (power-on hours) ____________________100,000 POWER REQUIREMENTS: +12V START-UP (amps) _4.5 +12V TYPICAL (amps) __0.9 +5V START-UP (amps) __1.3 +5V TYPICAL (amps) ___1.0 TYPICAL (watts) ______16 MAXIMUM (watts) ______61 BUFFERED STEP PULSE RATE (micro sec) _____ WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Already low-level formatted at the factory. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (6/26/90)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-2209N (94221-209/M) Wren 5 HH SCSI Power SCSI Cable 4 2 1 P Ú12ÄGÄGÄ5Ä¿ ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ A B C D E F G H o o o o ³ 0 0 0 0 ³ ³:::::::::::::::::::1³ o o o o o o o o o o o o \ÄÄÄÄÄÄÄÄÄ/ ÍÏÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÏÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ ³ ³ Ú¿ Ú¿ Ú¿ A-B Not used ³ ³ ³³ ³³ ³³ B-C Terminator power from Bus ³ ³ ³³ ³³ ³³ C-D Terminator power from Drive ³ ³ À1 À1 À1 D-E Not used ³ ³ Terminator E-F Not used ³ ³ SIPs, pin-1 F-G Continuous test seeks ³ ³ toward rear. G-H Motor Start option enable ³ ³ ³ ÀÄ Parity check ³ Drive Select ID Ù (ID 0 for single drive system) ST-2209N 94221-209/M WREN 5 HH UNFORMATTED CAPACITY (MB) ________________209 FORMATTED CAPACITY (xx SECTORS) (MB) _____179 AVERAGE SECTORS PER TRACK ________________45 ACTUATOR TYPE ____________________________VOICE COIL TRACKS ___________________________________7720 CYLINDERS ________________________________1544 HEADS ____________________________________5 DISCS ____________________________________3 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR (RLL (2,7) TRANSFER RATE (mbytes/sec) _______________1.125-1.875 SPINDLE SPEED (RPM) ______________________3,600 AVERAGE LATENCY (mSEC) ___________________8.33 BUFFER ___________________________________32 Kbyte Read Look-Ahead, Non Adaptive, Single-Segmented Buffer INTERFACE ________________________________SCSI TPI (TRACKS PER INCH) ____________________1280 BPI (BITS PER INCH) ______________________19213 AVERAGE ACCESS (ms) ______________________18 SINGLE TRACK SEEK (ms) ___________________4 MAX FULL SEEK (ms) _______________________40 MTBF (power-on hours) ____________________100,000 POWER REQUIREMENTS: +12V START-UP (amps) _4.5 +12V TYPICAL (amps) __0.9 +5V START-UP (amps) __1.3 +5V TYPICAL (amps) ___1.0 TYPICAL (watts) ______16 MAXIMUM (watts) ______61 BUFFERED STEP PULSE RATE (micro sec) _____ WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Already low-level formatted at the factory. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (6/26/90)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-2383N (94241-383) Wren 6 HH SCSI and SCSI-2 SCSI Cable Power ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ /ÄÄÄÄÄÄÄÄÄ\ ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵:::::::::::::::::::::::1ÆÍÍ͵ 0 0 0 0 ÆÍÍÍÍ o o o o o o o o o o ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÀÄ5ÄGÄGÄ12Ù o o o o o o o o oÄoÄ¿ ÚÄÄÄÄÄ1 ÚÄÄÄÄÄ1 ÚÄÄÄÄÄ1 R R R P M 4 2 1 ³ ³ ³ ÀÄÄÄÄÄÙ ÀÄÄÄÄÄÙ ÀÄÄÄÄÄÙ ÄÄÂÄÄ ³ ³ ÄÄÂÄÄ ³ ³ ³ Terminator SIPS ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ÀÄ Terminator power +5v from the Bus (lower horizontal) ³ ³ ³ ³ ³ ÀÄÄÄ Terminator power +5v from Drive (vertical) ³ ³ ³ ³ ÀÄÄÄÄÄ Terminator power +5v to the Bus (vertical) ³ ³ ³ ÀÄÄÄÄÄÄÄÄÄ Drive Select ID's ³ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄ Motor Start option enable ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Parity check enable ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Reserved Factory use ST-2383N 94241-383 WREN 6 HH UNFORMATTED CAPACITY (MB) ________________383 FORMATTED CAPACITY (xx SECTORS) (MB) _____332 AVERAGE SECTORS PER TRACK ________________74 ACTUATOR TYPE ____________________________VOICE COIL TRACKS ___________________________________8827 CYLINDERS ________________________________1261 HEADS ____________________________________7 DISCS ____________________________________4 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (2,7) TRANSFER RATE (mbytes/sec) _______________2.25-2.75 SPINDLE SPEED (RPM) ______________________3,600 AVERAGE LATENCY (mSEC) ___________________8.33 BUFFER ___________________________________64 Kbyte SCSI-1: Read Look-Ahead, Non-Adaptive, Single-Segmented Buffer SCSI-2: Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI TPI (TRACKS PER INCH) ____________________1459 BPI (BITS PER INCH) ______________________31674 AVERAGE ACCESS (ms) ______________________14 SINGLE TRACK SEEK (ms) ___________________3 MAX FULL SEEK (ms) _______________________33 MTBF (power-on hours) ____________________100,000 POWER REQUIREMENTS: +12V START-UP (amps) _4.0 +12V TYPICAL (amps) __1.0 +5V START-UP (amps) __0.75 +5V TYPICAL (amps) ___0.65 TYPICAL (watts) ______16 MAXIMUM (watts) ______58 BUFFERED STEP PULSE RATE (micro sec) _____ WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Already low-level formatted at the factory. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (6/26/90)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-2502N (94241-502) Wren 6 HH SCSI and SCSI-2 SCSI Cable Power ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ /ÄÄÄÄÄÄÄÄÄ\ ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵:::::::::::::::::::::::1ÆÍÍ͵ 0 0 0 0 ÆÍÍÍÍ o o o o o o o o o o ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÀÄ5ÄGÄGÄ12Ù o o o o o o o o oÄoÄ¿ ÚÄÄÄÄÄ1 ÚÄÄÄÄÄ1 ÚÄÄÄÄÄ1 R R R P M 4 2 1 ³ ³ ³ ÀÄÄÄÄÄÙ ÀÄÄÄÄÄÙ ÀÄÄÄÄÄÙ ÄÄÂÄÄ ³ ³ ÄÄÂÄÄ ³ ³ ³ Terminator SIPS ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ÀÄ Terminator power +5v from the Bus (lower horizontal) ³ ³ ³ ³ ³ ÀÄÄÄ Terminator power +5v from Drive (vertical) ³ ³ ³ ³ ÀÄÄÄÄÄ Terminator power +5v to the Bus (vertical) ³ ³ ³ ÀÄÄÄÄÄÄÄÄÄ Drive Select ID's ³ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄ Motor Start option enable ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Parity check enable ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Reserved Factory use ST-2502N 94241-502 WREN 6 HH UNFORMATTED CAPACITY (MB) ________________502 FORMATTED CAPACITY (xx SECTORS) (MB) _____435 AVERAGE SECTORS PER TRACK ________________69 ACTUATOR TYPE ____________________________VOICE COIL TRACKS ___________________________________12285 CYLINDERS ________________________________1755 HEADS ____________________________________7 DISCS ____________________________________4 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (2,7) TRANSFER RATE (mbytes/sec) _______________1.875-2.75 SPINDLE SPEED (RPM) ______________________3,600 AVERAGE LATENCY (mSEC) ___________________8.33 BUFFER ___________________________________64 Kbyte SCSI-1: Read Look-Ahead, Non-Adaptive, Single-Segmented Buffer SCSI-2: Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI TPI (TRACKS PER INCH) ____________________1459 BPI (BITS PER INCH) ______________________31674 AVERAGE ACCESS (ms) ______________________16 SINGLE TRACK SEEK (ms) ___________________3 MAX FULL SEEK (ms) _______________________33 MTBF (power-on hours) ____________________100,000 POWER REQUIREMENTS: +12V START-UP (amps) _4.0 +12V TYPICAL (amps) __1.0 +5V START-UP (amps) __0.75 +5V TYPICAL (amps) ___0.65 TYPICAL (watts) ______16 MAXIMUM (watts) ______58 BUFFERED STEP PULSE RATE (micro sec) _____ WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Already low-level formatted at the factory. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (6/26/90)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-3283N Rear View ÚÄ 50 pin SCSI Interface I/O connector ³ ³ DC power (TOP) ÕÍÍÍÍÍÍÍÍÍÍÍÍ ÍÍÍÍÍÍÍÍÍÍ͸ /Ä5ÄGÄGÄ12\ ÍÍÍ͵::::::::::::::::::::::::1Æ͵ 0 0 0 0 ÆÍ (BOTTOM) ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÀÄÄÄÄÄÄÄÄÄÙ ÚÄÄÄÄÄ1 ÚÄÄÄÄÄ1 ÚÄÄÄÄÄ1 ÀÄÄÄÄÄÙ ÀÄÄÄÄÄÙ ÀÄÄÄÄÄÙ Terminating Resistor Packs ST-3283N Left View o o o1 (TOP) o o o Õ͸ Front....ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍØÍØÍØÍÍÍÍ͵ I/O connector ³ ³ ³ Ô; SCSI Address ID 1 ÄÙ ³ ³ ID 2 ÄÄÄÙ ³ ID 4 ÄÄÄÄÄÙ ST-3283N Right View (board part number 260035, early version) o o4 (TOP) o o4 Õ͸ 1o³o o o o6 1o o DC Power ÆÍÍÍÍØÍÍÍÍÍÍ1o³o o ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍØÍØÍ Ô; ³ ÄÄÁÄÄÄÄ ³ ³ ³ Active/Passive Termination ³ À Remote Start ÄÄÁÄÄ ÄÄÂÄÄÄÄ ÀÄÄ Parity Enable Terminator Power ÚÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÄÄÂÄÄ ³ Active: Pins 1 & 2 shorted ³ ³ ³ only (+2.85V to ³ ³ ³ 110 ê) for FAST ³ ³ ³ SCSI; ³ ³ ³Passive: Pins 2 & 4 shorted ³ ³ ³ AND pins 5 & 6 shorted ³ ³ ³ (+5V and GND to ³ ³ ³ 220/330 ê) for ³ ³ ³ standard SCSI. ³ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³Terminator Power: From SCSI Connector ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Pins 1 & 2 ³ ³ From Power Connector ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Pins 1 & 3 ³ ³ To SCSI Connector Only ÄÄÄÄÄÄÄÄÄÄÄÄÄ Pins 3 & 4 ³ ³ From Power Connector and ÄÄÄÄÄÄÄÄÄÄÄ Pins 1 & 2 AND ³ ³ to SCSI Bus --------------------------- 3 & 4 ³ ³ Terminating Resistors not Installed Ä Pins 2 & 4 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ST-3283N Right View o o4 o o o6 (TOP) Õ͸ 1o³o 1o³o o DC Power ÆÍÍÍÍØÍÍÍÍÍÍ ³ ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Ô; ³ ³ ³ ÄÄÁÄÄÄÄ ³ Active/Passive Termination ÄÄÁÄÄ ÄÄÂÄÄÄÄ Terminator Power ÚÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÄÄÂÄÄ ³ Active: Pins 1 & 2 shorted ³ ³ ³ only (+2.85V to ³ ³ ³ 110 ê) for FAST ³ ³ ³ SCSI. ³ ³ ³Passive: Pins 2 & 4 shorted ³ ³ ³ AND pins 5 & 6 shorted ³ ³ ³ (+5V and GND to ³ ³ ³ 220/330 ê) for ³ ³ ³ standard SCSI; default.³ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³Terminator Power: From SCSI Connector ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Pins 1 & 2 ³ ³ From Power Connector (default) ÄÄÄÄÄ Pins 1 & 3 ³ ³ To SCSI Connector Only ÄÄÄÄÄÄÄÄÄÄÄÄÄ Pins 3 & 4 ³ ³ From Power Connector and ÄÄÄÄÄÄÄÄÄÄÄ Pins 1 & 2 AND ³ ³ to SCSI Bus --------------------------- 3 & 4 ³ ³ Terminating Resistors not Installed Ä Pins 2 & 4 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ST-3283N Front View (board part number 260035, early version) (TOP) o o o o o o o+ ÍÍÍÍ o Í o o o o o-ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ (BOTTOM) 1ÀÄÄÄÂÄÙ ³ ³ ³ ³ ³ ³ ÀÄÄ Remote LED ³ ³ ÀÄÄÄÄ Reserved ³ ÀÄÄÄÄÄÄ Ext. Spindle Clock Synch ³ pin-9 is Clock Ground ³ Ú Reserved ÀÄÄÄÄÄÄÄÄÄ´ Reserved ³ Reserved pin-3 removed for key À Reserved ST-3283N Front View ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ SCSI ID's (none for ID0) ³ not used if ID set on side jumpers ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Ext. Spindle Clock Synch ³ ³ pin-5 is Clock Ground ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄ Remote LED (TOP) ÚÄÁÄ¿ ³ ³ ÚÄÄÄÄÄÄ Reserved 4 2 1 ³ ³ ÚÄÄÄÁÄÄÄ¿ o o o o o-o o o o o 1o o o o o+o o o o o o o o o+ ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ1o o o o-ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ ³ ³ ³ ³ (BOTTOM) ³ ³ ³ ÀÄÄ Remote LED ³ ³ ÀÄÄÄÄ Ext. Spindle Clock Synch ³ ³ pin-5 is Clock Ground ³ ÀÄÄÄÄÄÄ Remote Start Enable ÀÄÄÄÄÄÄÄÄ Parity Enable ST-3283N UNFORMATTED CAPACITY _____________________ FORMATTED CAPACITY (xx SECTORS) __________248.62 AVERAGE SECTORS PER TRACK ________________57 rounded down ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________8,455 CYLINDERS ________________________________1,689 (user) HEADS ____________________________________5 DISCS (3.5 in) ___________________________3 MEDIA TYPE _______________________________THIN FILM HEAD TYPE ________________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec) _______15.0 to 24.4 EXTERNAL TRANSFER RATE (mbyte/sec) _______4 Async EXTERNAL TRANSFER RATE (mbyte/sec) _______10 Sync SPINDLE SPEED (RPM) ______________________4,500 AVERAGE LATENCY (mSEC) ___________________6.67 BUFFER ___________________________________128 Kbyte SeaCache Read Look-Ahead Multisegmented cache INTERFACE ________________________________SCSI-2 Fast SECTORS PER DRIVE ________________________485,601 TPI (TRACKS PER INCH) ____________________1,960 BPI (BITS PER INCH) ______________________38,000 AVERAGE ACCESS (ms) ______________________12 SINGLE TRACK SEEK (ms) ___________________<4 MAX FULL SEEK (ms) _______________________32 MTBF (power-on hours) Office _____________250,000 POWER REQUIREMENTS: +12V START-UP (amps) _1.5 POWER MANAGEMENT (Watts): ACTIVE _______________5.7 IDLE _________________3.0 STANDBY ______________1.0 WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO IBM AT DRIVE TYPE ________________________0 Formatted at the factory with 2 alternate cylinders. Total physical cylinders equal 1691. Physical: Height (inches/mm): 1.00/25.4 Width (inches/mm): 4.02/102.1 Depth (inches/mm): 5.77/146.6 Weight (lbs/kg): 1.5/0.68 Note: If FAST SCSI transfer rates are used, then the active termination options must be used. If the transfer rates are 5.0 MBytes/sec and below, either method of termination can be used. Although active and passive terminated devices can be installed on the same bus, both ends of the cable should be terminated in the same manner, either both active or both passive. Note: If your application requires no terminators, remove the terminators from the circuit board. Merely removing the terminator power source selection jumper does not disconnect the terminator resistors from the circuit. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (08/08/94) SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-3285N Rear View ÚÄ 50 pin SCSI Interface I/O connector ³ ³ DC power (TOP) ÕÍÍÍÍÍÍÍÍÍÍÍÍ ÍÍÍÍÍÍÍÍÍÍ͸ /Ä5ÄGÄGÄ12\ ÍÍÍ͵::::::::::::::::::::::::1Æ͵ 0 0 0 0 ÆÍ (BOTTOM) ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÀÄÄÄÄÄÄÄÄÄÙ ÚÄÄÄÄÄ1 ÚÄÄÄÄÄ1 ÚÄÄÄÄÄ1 ÀÄÄÄÄÄÙ ÀÄÄÄÄÄÙ ÀÄÄÄÄÄÙ Terminating Resistor Packs ST-3285N Left View o o o1 (TOP) o o o Õ͸ Front....ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍØÍØÍØÍÍÍÍ͵ I/O connector ³ ³ ³ Ô; SCSI Address ID 1 ÄÙ ³ ³ ID 2 ÄÄÄÙ ³ ID 4 ÄÄÄÄÄÙ ST-3285N Right View o o4 o o o6 (TOP) Õ͸ 1o³o 1o³o o DC Power ÆÍÍÍÍØÍÍÍÍÍÍ ³ ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Ô; ³ ³ ³ ÄÄÁÄÄÄÄ ³ Active/Passive Termination ÄÄÁÄÄ ÄÄÂÄÄÄÄ Terminator Power ÚÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÄÄÂÄÄ ³ Active: Pins 1 & 2 shorted ³ ³ ³ only (+2.85V to ³ ³ ³ 110 ê) for FAST ³ ³ ³ SCSI; ³ ³ ³Passive: Pins 2 & 4 shorted ³ ³ ³ AND pins 5 & 6 shorted ³ ³ ³ (+5V and GND to ³ ³ ³ 220/330 ê) for ³ ³ ³ standard SCSI. ³ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³Terminator Power: From SCSI Connector ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Pins 1 & 2 ³ ³ From Power Connector ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Pins 1 & 3 ³ ³ To SCSI Connector Only ÄÄÄÄÄÄÄÄÄÄÄÄÄ Pins 3 & 4 ³ ³ From Power Connector and ÄÄÄÄÄÄÄÄÄÄÄ Pins 1 & 2 AND ³ ³ to SCSI Bus --------------------------- 3 & 4 ³ ³ Terminating Resistors not Installed Ä Pins 2 & 4 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ST-3285N Front View ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ SCSI ID's (none for ID0) ³ not used if ID set on side jumpers ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Ext. Spindle Clock Synch ³ ³ pin-5 is Clock Ground ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄ Remote LED (TOP) ÚÄÁÄ¿ ³ ³ ÚÄÄÄÄÄÄ Reserved 4 2 1 ³ ³ ÚÄÄÄÁÄÄÄ¿ o o o o o-o o o o o 1o o o o o+o o o o o o o o o+ ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ1o o o o-ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ ³ ³ ³ ³ (BOTTOM) ³ ³ ³ ÀÄÄ Remote LED ³ ³ ÀÄÄÄÄ Ext. Spindle Clock Synch ³ ³ pin-5 is Clock Ground ³ ÀÄÄÄÄÄÄ Remote Start Enable ÀÄÄÄÄÄÄÄÄ Parity Enable ST-3285N UNFORMATTED CAPACITY _____________________ FORMATTED CAPACITY (xx SECTORS) __________248.62 AVERAGE SECTORS PER TRACK ________________57 rounded down ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________8,455 CYLINDERS ________________________________1,689 (user) HEADS ____________________________________3 DISCS (3.5 in) ___________________________2 MEDIA TYPE _______________________________THIN FILM HEAD TYPE ________________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec) _______15.0 to 24.4 EXTERNAL TRANSFER RATE (mbyte/sec) _______4 Async EXTERNAL TRANSFER RATE (mbyte/sec) _______10 Sync SPINDLE SPEED (RPM) ______________________4,500 AVERAGE LATENCY (mSEC) ___________________6.67 BUFFER ___________________________________128 Kbyte SeaCache Read Look-Ahead Multisegmented cache INTERFACE ________________________________SCSI-2 Fast SECTORS PER DRIVE ________________________485,601 TPI (TRACKS PER INCH) ____________________1,960 BPI (BITS PER INCH) ______________________38,000 AVERAGE ACCESS (ms) ______________________12 SINGLE TRACK SEEK (ms) ___________________<4 MAX FULL SEEK (ms) _______________________32 MTBF (power-on hours) Office _____________250,000 POWER REQUIREMENTS: +12V START-UP (amps) _1.5 POWER MANAGEMENT (Watts): ACTIVE _______________5.7 IDLE _________________3.0 STANDBY ______________1.0 WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO IBM AT DRIVE TYPE ________________________0 Formatted at the factory with 2 alternate cylinders. Total physical cylinders equal 1691. Physical: Height (inches/mm): 1.00/25.4 Width (inches/mm): 4.02/102.1 Depth (inches/mm): 5.77/146.6 Weight (lbs/kg): 1.5/0.68 Note: If FAST SCSI transfer rates are used, then the active termination options must be used. If the transfer rates are 5.0 MBytes/sec and below, either method of termination can be used. Although active and passive terminated devices can be installed on the same bus, both ends of the cable should be terminated in the same manner, either both active or both passive. Note: If your application requires no terminators, remove the terminators from the circuit board. Merely removing the terminator power source selection jumper does not disconnect the terminator resistors from the circuit. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (08/08/94) SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1993 ST-3390N Rear View ÚÄ 50 pin SCSI Interface I/O connector ³ ³ DC power (TOP) ÕÍÍÍÍÍÍÍÍÍÍÍÍ ÍÍÍÍÍÍÍÍÍÍ͸ /Ä5ÄGÄGÄ12\ ÍÍÍ͵::::::::::::::::::::::::1Æ͵ 0 0 0 0 ÆÍ (BOTTOM) ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÀÄÄÄÄÄÄÄÄÄÙ ÚÄÄÄÄÄ1 ÚÄÄÄÄÄ1 ÚÄÄÄÄÄ1 ÀÄÄÄÄÄÙ ÀÄÄÄÄÄÙ ÀÄÄÄÄÄÙ Terminating Resistor Packs ST-3390N Left View o o o1 (TOP) o o o Õ͸ Front....ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍØÍØÍØÍÍÍÍ͵ I/O connector ³ ³ ³ Ô; SCSI Address ID 1 ÄÙ ³ ³ ID 2 ÄÄÄÙ ³ ID 4 ÄÄÄÄÄÙ ST-3390N Right View o o4 o o o6 (TOP) Õ͸ 1o³o 1o³o o DC Power ÆÍÍÍÍØÍÍÍÍÍÍ ³ ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Ô; ³ ³ ³ ÄÄÁÄÄÄÄ ³ Active/Passive Termination ÄÄÁÄÄ ÄÄÂÄÄÄÄ Terminator Power ÚÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÄÄÂÄÄ ³ Active: Pins 1 & 2 shorted ³ ³ ³ only (+2.85V to ³ ³ ³ 110 ê) for FAST ³ ³ ³ SCSI; ³ ³ ³Passive: Pins 2 & 4 shorted ³ ³ ³ AND pins 5 & 6 shorted ³ ³ ³ (+5V and GND to ³ ³ ³ 220/330 ê) for ³ ³ ³ standard SCSI. ³ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³Terminator Power: From SCSI Connector ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Pins 1 & 2 ³ ³ From Power Connector ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Pins 1 & 3 ³ ³ To SCSI Connector Only ÄÄÄÄÄÄÄÄÄÄÄÄÄ Pins 3 & 4 ³ ³ From Power Connector and ÄÄÄÄÄÄÄÄÄÄÄ Pins 1 & 2 AND ³ ³ to SCSI Bus --------------------------- 3 & 4 ³ ³ Terminating Resistors not Installed Ä Pins 2 & 4 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ST-3390N Front View ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ SCSI ID's (none for ID0) ³ not used if ID set on side jumpers ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Ext. Spindle Clock Synch ³ ³ pin-5 is Clock Ground ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄ Remote LED (TOP) ÚÄÁÄ¿ ³ ³ ÚÄÄÄÄÄÄ Reserved 4 2 1 ³ ³ ÚÄÄÄÁÄÄÄ¿ o o o o o-o o o o o 1o o o o o+o o o o o o o o o+ ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ1o o o o-ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ ³ ³ ³ ³ (BOTTOM) ³ ³ ³ ÀÄÄ Remote LED ³ ³ ÀÄÄÄÄ Ext. Spindle Clock Synch ³ ³ pin-5 is Clock Ground ³ ÀÄÄÄÄÄÄ Remote Start Enable ÀÄÄÄÄÄÄÄÄ Parity Enable ST-3390N UNFORMATTED CAPACITY _____________________ FORMATTED CAPACITY (xx SECTORS) __________344.3 AVERAGE SECTORS PER TRACK ________________83 rounded down ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________8,028 CYLINDERS ________________________________2,676 (user) HEADS ____________________________________3 DISCS (3.5 in) ___________________________2 MEDIA TYPE _______________________________THIN FILM HEAD TYPE ________________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec) _______21.6 to 36.3 EXTERNAL TRANSFER RATE (mbyte/sec) _______4 Async EXTERNAL TRANSFER RATE (mbyte/sec) _______10 Sync SPINDLE SPEED (RPM) ______________________4,500 AVERAGE LATENCY (mSEC) ___________________6.67 BUFFER ___________________________________256 Kbyte SeaCache Multisegmented, read look-ahead INTERFACE ________________________________SCSI-2 Fast BYTES PER TRACK __________________________42,888 avg. SECTORS PER DRIVE ________________________672,480 TPI (TRACKS PER INCH) ____________________3,000 BPI (BITS PER INCH) ______________________52,602 AVERAGE ACCESS (ms) ______________________12 SINGLE TRACK SEEK (ms) ___________________<4 MAX FULL SEEK (ms) _______________________30 MTBF (power-on hours) Office _____________250,000 POWER REQUIREMENTS: +12V START-UP (amps) _1.9 POWER MANAGEMENT (Watts): ACTIVE _______________5.75 IDLE _________________3.0 WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO IBM AT DRIVE TYPE ________________________0 Formatted at the factory with 2 alternate cylinders. Total physical cylinders equal 2678. Physical: Height (inches/mm): 1.00/25.4 Width (inches/mm): 4.02/102.1 Depth (inches/mm): 5.77/146.6 Weight (lbs/kg): 1.5/0.68 Note: If FAST SCSI transfer rates are used, then the active termination options must be used. If the transfer rates are 5.0 MBytes/sec and below, either method of termination can be used. Although active and passive terminated devices can be installed on the same bus, both ends of the cable should be terminated in the same manner, either both active or both passive. Note: If your application requires no terminators, remove the terminators from the circuit board. Merely removing the terminator power source selection jumper does not disconnect the terminator resistors from the circuit. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (08/08/94) SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-3500N SCSI-2 Fast ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º ÈÍÍÍÍÍÍÍÍÍÍͼ 50 pin I/O Cable Connection ³ J1ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ1¸ /ÄÄÄÄÄÄÄÄÄ\ TOP (HDA) ͵:::::::::::::::::::::::::Æͳ 0 0 0 0 ³ÍÍ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÀÄ5ÄGÄGÄ12Ù BOTTOM 1ÄÄÄÄÄÄ¿ 1ÄÄÄÄÄÄ¿ 1ÄÄÄÄÄÄ¿ ÀÄÄÄÄÄÄÙ ÀÄÄÄÂÄÄÙ ÀÄÄÄÄÄÄÙ ÀTerminating ResistorsÙ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º RIGHT SIDE VIEW º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ BACK Õ͸ J2 87654321 TOP (HDA) FRONT OF J1ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ OF DRIVE Ô; :::::::: BOTTOM DRIVE ³³³³³³³³ ³Terminator Power Ù³³³³³³À Reserved Ú´Terminator Power ÄÙ³³³³ÀÄ Start Delay (16 secs * ID) ³ Factory Use ÄÄÙ³³ÀÄÄ Motor Start ³ Parity Enable ÄÄÄÙÀÄÄÄ Write Protect ³ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÀÄ´ Termination Power-source Table ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ 8 7 8 7 8 7 ³ ³ ÖÄ· ÖÄ· A Drive Supplies Bus ³ ³ ºøºø øºøº ÖøÄø· B Drive Supplies Own ³ ³ Óø½ø øÓø½ Óø ø½ C Bus Supplies Drive ³ ³ A B C ³ ³ÍÍÍÍÍ....ÍÍÍÍÍ....ÍÍÍÍÍPWA edgeÍÍÍÍÍ ³ ³ ³ ÀÄÄÄÄÄÄDefaultÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º LEFT SIDE VIEW º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ If these ID jumpers are used, then ID jumpers shown in front view ARE NOT USED. FRONT TOP (HDA) J5 ÕÍÍ1¸ Õ͸BACK OF ÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵:::Æ͵J1 OF DRIVE BOTTOM ÔÍÍ; Ô;DRIVE ³³³ Note: On early drives ³ ID 1 ÄÙ³ÀÄ ID 4 with PCB# 75782480 these³ ID 2 ID jumpers are reversed.ÃÄÄ ID 4 ID 1 ÉÍÍÍÍÍÍÍÍÍÍÍÍ» º FRONT VIEW º ÈÍÍÍÍÍÍÍÍÍÍÍͼ TOP (HDA) J6 ÕÍÍÍÍÍ1¸ ÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵::::::ÆÍ * BOTTOM ÔÍÍÍÍÍ; ³ 123456 LED ÄÙ ³³³³³³ ID 4 Ù³³³³À Reserved ID 2 ÄÙ³³ÀÄ Remote LED (pin-3 +5v) ID 1 ÄÄÙÀÄÄ Spindle Synchronization (pin-6 REF SIG+) If these ID jumper are used, then ID jumpers shown in left side view ARE NOT USED. ST-3500N UNFORMATTED CAPACITY (MB) ________________502 FORMATTED CAPACITY (xx SECTORS) (MB) _____426 AVERAGE SECTORS PER TRACK ________________76 ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________10,829 CYLINDERS __PHYSICAL______________________1,547 (user) HEADS ______PHYSICAL______________________7 DISCS (3.5 in) ___________________________4 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec)________21.7 to 31.9 EXTERNAL TRANSFER RATE (mbyte/sec) _______4 Async EXTERNAL TRANSFER RATE (mbyte/sec) _______10 Sync SPINDLE SPEED (RPM) ______________________4,535 AVERAGE LATENCY (mSEC) ___________________6.61 BUFFER ___________________________________240 KByte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 FAST SECTORS PER DRIVE ________________________ TPI (TRACKS PER INCH) ____________________2150 AVERAGE ACCESS (ms) (read/write)__________9.9/11.4 SINGLE TRACK SEEK (ms) ___________________2 MAX FULL SEEK (ms) _______________________26 MTBF (power-on hours) ____________________200,000 POWER REQUIREMENTS: +12V START-UP (amps) _1.5 +12V TYPICAL (amps) __0.4 +5V START-UP (amps) __ +5V TYPICAL (amps) ___0.2 TYPICAL (watts) ______5 MAXIMUM (watts) ______ WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Already low-level formatted at the factory with one spare sector per track and two spare cylinders/unit. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (08/08/94)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-3550N Rear View ÚÄ 50 pin SCSI Interface I/O connector ³ ³ DC power (TOP) ÕÍÍÍÍÍÍÍÍÍÍÍÍ ÍÍÍÍÍÍÍÍÍÍ͸ /Ä5ÄGÄGÄ12\ ÍÍÍ͵::::::::::::::::::::::::1Æ͵ 0 0 0 0 ÆÍ (BOTTOM) ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÀÄÄÄÄÄÄÄÄÄÙ ÚÄÄÄÄÄ1 ÚÄÄÄÄÄ1 ÚÄÄÄÄÄ1 ÀÄÄÄÄÄÙ ÀÄÄÄÄÄÙ ÀÄÄÄÄÄÙ Terminating Resistor Packs ST-3550N Left View o o o1 (TOP) o o o Õ͸ Front....ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍØÍØÍØÍÍÍÍ͵ I/O connector ³ ³ ³ Ô; SCSI Address ID 1 ÄÙ ³ ³ ID 2 ÄÄÄÙ ³ ID 4 ÄÄÄÄÄÙ ST-3550N Right View o o4 o o o6 (TOP) Õ͸ 1o³o 1o³o o DC Power ÆÍÍÍÍØÍÍÍÍÍÍ ³ ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Ô; ³ ³ ³ ÄÄÁÄÄÄÄ ³ Active/Passive Termination ÄÄÁÄÄ ÄÄÂÄÄÄÄ Terminator Power ÚÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÄÄÂÄÄ ³ Active: Pins 1 & 2 shorted ³ ³ ³ only (+2.85V to ³ ³ ³ 110 ê) for FAST ³ ³ ³ SCSI; ³ ³ ³Passive: Pins 2 & 4 shorted ³ ³ ³ AND pins 5 & 6 shorted ³ ³ ³ (+5V and GND to ³ ³ ³ 220/330 ê) for ³ ³ ³ standard SCSI. ³ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³Terminator Power: From SCSI Connector ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Pins 1 & 2 ³ ³ From Power Connector ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Pins 1 & 3 ³ ³ To SCSI Connector Only ÄÄÄÄÄÄÄÄÄÄÄÄÄ Pins 3 & 4 ³ ³ From Power Connector and ÄÄÄÄÄÄÄÄÄÄÄ Pins 1 & 2 AND ³ ³ to SCSI Bus --------------------------- 3 & 4 ³ ³ Terminating Resistors not Installed Ä Pins 2 & 4 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ST-3550N Front View ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ SCSI ID's (none for ID0) ³ not used if ID set on side jumpers ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Ext. Spindle Clock Synch ³ ³ pin-5 is Clock Ground ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄ Remote LED (TOP) ÚÄÁÄ¿ ³ ³ ÚÄÄÄÄÄÄ Reserved 4 2 1 ³ ³ ÚÄÄÄÁÄÄÄ¿ o o o o o-o o o o o 1o o o o o+o o o o o o o o o+ ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ1o o o o-ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ ³ ³ ³ ³ (BOTTOM) ³ ³ ³ ÀÄÄ Remote LED ³ ³ ÀÄÄÄÄ Ext. Spindle Clock Synch ³ ³ pin-5 is Clock Ground ³ ÀÄÄÄÄÄÄ Remote Start Enable ÀÄÄÄÄÄÄÄÄ Parity Enable ST-3550N UNFORMATTED CAPACITY _____________________ FORMATTED CAPACITY (xx SECTORS) __________456.5 AVERAGE SECTORS PER TRACK ________________83 rounded down ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________10,630 CYLINDERS ________________________________2,126 (user) HEADS ____________________________________5 DISCS (3.5 in) ___________________________3 MEDIA TYPE _______________________________THIN FILM HEAD TYPE ________________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec) _______21.6 to 36.3 EXTERNAL TRANSFER RATE (mbyte/sec) _______4 Async EXTERNAL TRANSFER RATE (mbyte/sec) _______10 Sync SPINDLE SPEED (RPM) ______________________4,500 AVERAGE LATENCY (mSEC) ___________________6.67 BUFFER ___________________________________256 Kbyte SeaCache Multisegmented, read look-ahead INTERFACE ________________________________SCSI-2 Fast BYTES PER TRACK __________________________42,943 avg. SECTORS PER DRIVE ________________________891,574 TPI (TRACKS PER INCH) ____________________2,400 BPI (BITS PER INCH) ______________________52,602 AVERAGE ACCESS (ms) ______________________12 SINGLE TRACK SEEK (ms) ___________________<4 MAX FULL SEEK (ms) _______________________32 MTBF (power-on hours) Office _____________250,000 POWER REQUIREMENTS: +12V START-UP (amps) _1.9 POWER MANAGEMENT (Watts): ACTIVE _______________5.75 IDLE _________________3.0 STANDBY ______________1.0 WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO IBM AT DRIVE TYPE ________________________0 Formatted at the factory with 2 alternate cylinders. Total physical cylinders equal 2128. Physical: Height (inches/mm): 1.00/25.4 Width (inches/mm): 4.02/102.1 Depth (inches/mm): 5.77/146.6 Weight (lbs/kg): 1.5/0.68 Note: If FAST SCSI transfer rates are used, then the active termination options must be used. If the transfer rates are 5.0 MBytes/sec and below, either method of termination can be used. Although active and passive terminated devices can be installed on the same bus, both ends of the cable should be terminated in the same manner, either both active or both passive. Note: If your application requires no terminators, remove the terminators from the circuit board. Merely removing the terminator power source selection jumper does not disconnect the terminator resistors from the circuit. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (08/08/94) SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-3600N SCSI-2 Fast ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º ÈÍÍÍÍÍÍÍÍÍÍͼ 50 pin I/O Cable Connection ³ J1ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ1¸ /ÄÄÄÄÄÄÄÄÄ\ TOP (HDA) ͵:::::::::::::::::::::::::Æͳ 0 0 0 0 ³ÍÍ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÀÄ5ÄGÄGÄ12Ù BOTTOM 1ÄÄÄÄÄÄ¿ 1ÄÄÄÄÄÄ¿ 1ÄÄÄÄÄÄ¿ ÀÄÄÄÄÄÄÙ ÀÄÄÄÂÄÄÙ ÀÄÄÄÄÄÄÙ ÀTerminating ResistorsÙ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º RIGHT SIDE VIEW º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ BACK Õ͸ J2 12345678 TOP (HDA) FRONT OF J1ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ OF DRIVE Ô; :::::::: BOTTOM DRIVE ³³³³³³³³ ³Terminator Power Ù³³³³³³À Reserved Ú´Terminator Power ÄÙ³³³³ÀÄ Start Delay (16 secs * ID) ³ Factory Use ÄÄÙ³³ÀÄÄ Motor Start ³ Parity Enable ÄÄÄÙÀÄÄÄ Write Protect ³ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÀÄ´ Termination Power-source Table ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ÍÍÍÍÍ....ÍÍÍÍÍ....ÍÍÍÍÍPWA edgeÍÍÍÍÍ ³ ³ ³ ³ 1 2 1 2 1 2 ³ ³ ÖÄ· ÖÄ· A Drive Supplies Bus ³ ³ ºøºø øºøº ÖøÄø· B Drive Supplies Own ³ ³ Óø½ø øÓø½ Óø ø½ C Bus Supplies Drive ³ ³ A B C ³ ÀÄÄÄÄÄÄÄÄÄDefaultÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º LEFT SIDE VIEW º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ If these ID jumpers are used, then ID jumpers shown in front view ARE NOT USED. FRONT TOP (HDA) J5 ÕÍÍ1¸ Õ͸BACK OF ÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵:::Æ͵J1 OF DRIVE BOTTOM ÔÍÍ; Ô;DRIVE ³³³ Note: On early drives ³ ID 1 ÄÙ³ÀÄ ID 4 with PCB# 75782480 these³ ID 2 ID jumpers are reversed.ÃÄÄ ID 4 ID 1 ÉÍÍÍÍÍÍÍÍÍÍÍÍ» º FRONT VIEW º ÈÍÍÍÍÍÍÍÍÍÍÍͼ TOP (HDA) J6 ÕÍÍÍÍÍ1¸ ÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵::::::ÆÍ * BOTTOM ÔÍÍÍÍÍ; ³ 123456 LED ÄÙ ³³³³³³ ID 4 Ù³³³³À Reserved ID 2 ÄÙ³³ÀÄ Remote LED (pin-3 +5v) ID 1 ÄÄÙÀÄÄ Spindle Synchronization (pin-6 REF SIG+) If these ID jumper are used, then ID jumpers shown in left side view ARE NOT USED. ST-3600N UNFORMATTED CAPACITY (MB) ________________617 FORMATTED CAPACITY (xx SECTORS) (MB) _____525 AVERAGE SECTORS PER TRACK ________________79 ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________13,104 CYLINDERS __PHYSICAL______________________1,872 (user) HEADS ______PHYSICAL______________________7 DISCS (3.5 in) ___________________________4 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec)________18.5 to 34.2 EXTERNAL TRANSFER RATE (mbyte/sec) _______4 Async EXTERNAL TRANSFER RATE (mbyte/sec) _______10 Sync SPINDLE SPEED (RPM) ______________________4,467 AVERAGE LATENCY (mSEC) ___________________6.71 BUFFER ___________________________________240 KByte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 FAST SECTORS PER DRIVE ________________________1,025,919 TPI (TRACKS PER INCH) ____________________2150 AVERAGE ACCESS (ms) (read/write)__________10.5/11.2 Drive level without controller overhead SINGLE TRACK SEEK (ms) ___________________2 MAX FULL SEEK (ms) _______________________24 MTBF (power-on hours) ____________________200,000 POWER REQUIREMENTS: +12V START-UP (amps) _1.5 +12V TYPICAL (amps) __0.4 +5V START-UP (amps) __ +5V TYPICAL (amps) ___0.2 TYPICAL (watts) ______5 MAXIMUM (watts) ______ WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Already low-level formatted at the factory with one spare sector per track and two spare cylinders/unit. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (08/08/94) SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1993 ST-3610N SCSI-2 Fast ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º ÈÍÍÍÍÍÍÍÍÍÍͼ 50 pin I/O Cable Connection ³ J1ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ1¸ /ÄÄÄÄÄÄÄÄÄ\ TOP (HDA) ͵:::::::::::::::::::::::::Æͳ 0 0 0 0 ³ÍÍ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÀÄ5ÄGÄGÄ12Ù BOTTOM 1ÄÄÄÄÄÄ¿ 1ÄÄÄÄÄÄ¿ 1ÄÄÄÄÄÄ¿ ÀÄÄÄÄÄÄÙ ÀÄÄÄÂÄÄÙ ÀÄÄÄÄÄÄÙ ÀTerminating ResistorsÙ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º RIGHT SIDE VIEW º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ BACK Õ͸ J2 12345678 TOP (HDA) FRONT OF J1ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ OF DRIVE Ô; :::::::: BOTTOM DRIVE ³³³³³³³³ ³Terminator Power Ù³³³³³³À Reserved Ú´Terminator Power ÄÙ³³³³ÀÄ Start Delay (12 secs * ID) ³ Factory Use ÄÄÙ³³ÀÄÄ Motor Start ³ Parity Enable ÄÄÄÙÀÄÄÄ Write Protect ³ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÀÄ´ Termination Power-source Table ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ÍÍÍÍÍ....ÍÍÍÍÍ....ÍÍÍÍÍPWA edgeÍÍÍÍÍ ³ ³ ³ ³ 1 2 1 2 1 2 ³ ³ ÖÄ· ÖÄ· A Drive Supplies Bus ³ ³ ºøºø øºøº ÖøÄø· B Drive Supplies Own ³ ³ Óø½ø øÓø½ Óø ø½ C Bus Supplies Drive ³ ³ A B C ³ ÀÄÄÄÄÄÄÄÄÄDefaultÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º LEFT SIDE VIEW º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ If these ID jumpers are used, then ID jumpers shown in front view ARE NOT USED. FRONT TOP (HDA) J5 ÕÍÍ1¸ Õ͸BACK OF ÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵:::Æ͵J1 OF DRIVE BOTTOM ÔÍÍ; Ô;DRIVE ³³³ ID 4 ÄÙ³ÀÄ ID 1 ID 2 ÉÍÍÍÍÍÍÍÍÍÍÍÍ» º FRONT VIEW º ÈÍÍÍÍÍÍÍÍÍÍÍͼ TOP (HDA) J6 ÕÍÍÍÍÍ1¸ ÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵::::::ÆÍ * BOTTOM ÔÍÍÍÍÍ; ³ 123456 LED ÄÙ ³³³³³³ ID 4 Ù³³³³À Reserved ID 2 ÄÙ³³ÀÄ Remote LED (pin-3 +5v) ID 1 ÄÄÙÀÄÄ Spindle Synchronization (pin-6 REF SIG+) If these ID jumper are used, then ID jumpers shown in left side view ARE NOT USED. ST-3610N UNFORMATTED CAPACITY (MB) ________________635 FORMATTED CAPACITY (xx SECTORS) (MB) _____535 AVERAGE SECTORS PER TRACK ________________79 rounded down ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________13,104 CYLINDERS __PHYSICAL______________________1,872 (user) HEADS ______PHYSICAL______________________7 DISCS (3.5 in) ___________________________4 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec)________25 to 41 EXTERNAL TRANSFER RATE (mbyte/sec) _______4 Async EXTERNAL TRANSFER RATE (mbyte/sec) _______10 Sync SPINDLE SPEED (RPM) ______________________5,411 AVERAGE LATENCY (mSEC) ___________________5.54 BUFFER ___________________________________256 KByte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 FAST BYTES PER TRACK (unformatted) ____________48,460 average SECTORS PER DRIVE ________________________1,046,205 TPI (TRACKS PER INCH) ____________________ AVERAGE ACCESS (ms) (read/write)__________10.5/11.2 Drive level without controller overhead SINGLE TRACK SEEK (ms) ___________________2 MAX FULL SEEK (ms) _______________________24 MTBF (power-on hours) ____________________200,000 POWER REQUIREMENTS: +12V START-UP (amps) _1.5 +12V TYPICAL (amps) __0.4 +5V START-UP (amps) __ +5V TYPICAL (amps) ___0.6 TYPICAL (watts) ______6.5 MAXIMUM (watts) ______ WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Physical: Height (inches/mm): 1.00/25.4 Width (inches/mm): 4.02/102.1 Depth (inches/mm): 5.77/146.6 Weight (lbs/kg): 1.5/0.68 Already low-level formatted at the factory with one spare sector per track and two spare cylinders/unit. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (08/08/94) SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1993 ST-3620N SCSI-2 Fast (Hawk 1LP) ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º (ST-3620N only) ÈÍÍÍÍÍÍÍÍÍÍͼ 50 pin I/O Cable Connection ³ J1ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ1¸ /ÄÄÄÄÄÄÄÄÄ\ TOP (HDA) ͵:::::::::::::::::::::::::Æͳ 0 0 0 0 ³ÍÍ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÀÄ5ÄGÄGÄ12Ù BOTTOM ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º (ST-3620NC only) ÈÍÍÍÍÍÍÍÍÍÍͼ 80 pin I/O and DC Power Wall/bracket Connection ³ J1 /ÄÄÄijÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ\ TOP (HDA) ÍÍÍÍÍÍÍÍÍÍ/ ×××××××××××××××××××× \ÍÍÍÍÍÍÍÍÍÍ (\Ä1ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ40/) BOTTOM Notes on 80 pin I/O connector: pins 1 - 4 = +12v 41 - 44 = 12v GND 34 - 36 = +5v 74 - 76 = 5v GND 37 = SYNC 77 = LEDC 38 = MTRON 78 = DLYDST 39 = SCSIA0 79 = SCSIA1 40 = SCSIA2 80 = SCSIA3 Mating NC connector: AMP US p/n: 2-557103-1 straight-in 2-557101-1 right angle to PCB ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º RIGHT SIDE VIEW º (Both ST-3620N and ST-3620NC) ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ BACK Õ͸ J2 12345678 TOP (HDA) FRONT OF J1ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ OF DRIVE Ô; :::::::: BOTTOM DRIVE ³³³³³³³³ ³Terminator Power Ù³³³³³³À Reserved Ú´Terminator Power ÄÙ³³³³ÀÄ Start Delay (12 secs * ID) ³ Enable T-Res ÄÄÙ³³ÀÄÄ Motor Start ³ Parity Enable ÄÄÄÙÀÄÄÄ Write Protect ³ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÀÄ´ Termination Power-source Table ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ÍÍÍÍÍ....ÍÍÍÍÍ....ÍÍÍÍÍPWA edgeÍÍÍÍÍ ³ ³ ³ ³ 1 2 1 2 1 2 ³ ³ ÖÄ· ÖÄ· ÖÄÄÄ· A Drive Supplies Bus ³ ³ ºøºø øºøº ÓøÄø½ B Drive Supplies Own ³ ³ Óø½ø øÓø½ ø ø C Bus Supplies Drive ³ ³ A B C ³ ÀÄÄÄÄÄÄÄÄÄDefaultÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º LEFT SIDE VIEW º (ST-3620N only) ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ If these ID jumpers are used, then ID jumpers shown in front view ARE NOT USED. FRONT TOP (HDA) J5 ÕÍÍ1¸ Õ͸BACK OF ÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵:::Æ͵J1 OF DRIVE BOTTOM ÔÍÍ; Ô;DRIVE ³³³ ID 1 ÄÙ³ÀÄ ID 4 ID 2 ÉÍÍÍÍÍÍÍÍÍÍÍÍ» º FRONT VIEW º (Both ST-3620N and ST-3620NC) ÈÍÍÍÍÍÍÍÍÍÍÍͼ TOP (HDA) J6 ÕÍÍÍÍÍ1¸ ÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵::::::ÆÍ * BOTTOM ÔÍÍÍÍÍ; ³ 123456 LED ÄÙ ³³³³³³ ID 4 Ù³³³³À Reserved ID 2 ÄÙ³³ÀÄ Remote LED (pin-3 +5v) ID 1 ÄÄÙÀÄÄ Spindle Synchronization (pin-6 REF SIG+) If these ID jumper are used, then ID jumpers shown in left side view J5 or 80 pin I/O cable ARE NOT USED. ST-3620N Hawk 1LP UNFORMATTED CAPACITY (MB) ________________651.8 FORMATTED CAPACITY (xx SECTORS) (MB) _____545.9 AVERAGE SECTORS PER TRACK ________________78 rounded down ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________13,500 CYLINDERS __PHYSICAL______________________2,700 user HEADS ______PHYSICAL______________________5 DISCS (3.5 in) ___________________________3 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec)________24.4 to 42.4 EXTERNAL TRANSFER RATE (mbyte/sec) _______4 Async EXTERNAL TRANSFER RATE (mbyte/sec) _______10 Sync SPINDLE SPEED (RPM) ______________________5411 AVERAGE LATENCY (mSEC) ___________________5.54 BUFFER ___________________________________256/1024 KByte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 FAST SECTORS PER DRIVE ________________________ TPI (TRACKS PER INCH) ____________________3000 AVERAGE ACCESS (ms) (read/write)__________9.3/10.5 Drive level without controller overhead SINGLE TRACK SEEK (ms) (read/write)_______1.0/1.7 MAX FULL SEEK (ms) (read/write)___________19.4/22.9 MTBF (power-on hours) ____________________500,000 POWER REQUIREMENTS: +12V START-UP (amps) _1.5 +12V TYPICAL (amps) __0.5 +5V START-UP (amps) __ +5V TYPICAL (amps) ___0.2 TYPICAL (watts) ______7 MAXIMUM (watts) ______ WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Physical: Height (inches/mm): 1.00/25.4 Width (inches/mm): 4.02/102.1 Depth (inches/mm): 5.77/146.6 Weight (lbs/kg): 1.5/0.68 Already low-level formatted at the factory with one spare sector per track and two spare cylinders/unit. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (08/09/94) SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1993 ST-3620W Fast Wide SCSI-2 (Hawk 1LP) ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º (ST-3620W) ÈÍÍÍÍÍÍÍÍÍÍͼ (TOP) Auxiliary ___________________ ÚÄÄ Ä1¿/ÍÍÍÍÍÍÍÍÍ\ Í( ×××××××××××××××××1)ͳ::::::³³ 0 0 0 0 ÆÍ \ÄÄÄÄÄÄÄÄÄÄÄijÄÄÄÄ/ À ÄÄ ÙÀÄ5ÄGÄGÄ12Ù 68 pin I/O CableÙ ³³³³³³ ³³³³³³ ³³³³³³ ³³³³³³ Auxiliary option header ³³³³³³ pin-11 +5v ÄÄÄÄÄÄÄÄÄÙ³³³³³ pin-10 GND ÄÄÄÄÄÄÄÄÄÄÙ³³³³ SCSI ID = 8 ÄÄÄÄÄÄÄÄÄÄÄÙ³³³ SCSI ID = 4 ÄÄÄÄÄÄÄÄÄÄÄÄ´³³ or pin-6 REFIND+ ÄÄÄÄÄÄÙ³³ SCSI ID = 2 ÄÄÄÄÄÄÄÄÄÄÄÄÄÙ³ SCSI ID = 1 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ SCSI ID = 0 (none) ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º RIGHT SIDE VIEW º (ST-3620W) ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ BACK Õ͸ J2 12345678 TOP (HDA) FRONT OF J1ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ OF DRIVE Ô; :::::::: BOTTOM DRIVE ³³³³³³³³ ³Terminator Power Ù³³³³³³À Reserved Ú´Terminator Power ÄÙ³³³³ÀÄ Start Delay (12 secs * ID) ³ Enable T-Res ÄÄÙ³³ÀÄÄ Motor Start ³ Parity Enable ÄÄÄÙÀÄÄÄ Write Protect ³ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÀÄ´ Termination Power-source Table ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ÍÍÍÍÍ....ÍÍÍÍÍ....ÍÍÍÍÍPWA edgeÍÍÍÍÍ ³ ³ ³ ³ 1 2 1 2 1 2 ³ ³ ÖÄ· ÖÄ· ÖÄÄÄ· A Drive Supplies Bus ³ ³ ºøºø øºøº ÓøÄø½ B Drive Supplies Own ³ ³ Óø½ø øÓø½ ø ø C Bus Supplies Drive ³ ³ A B C ³ ÀÄÄÄÄÄÄÄÄÄDefaultÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÉÍÍÍÍÍÍÍÍÍÍÍÍ» º FRONT VIEW º (ST-3620W) ÈÍÍÍÍÍÍÍÍÍÍÍͼ TOP (HDA) J6 ÕÍÍÍÍÍ1¸ ÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵::::::ÆÍ * BOTTOM ÔÍÍÍÍÍ; ³ ³³³³³³ LED ÄÙ ³³³³³³ ³³³³³³ ³³³³³³ Auxiliary option header ³³³³³³ pin-11 +5v ÄÄÄÄÄÄÄÄÄÙ³³³³³ pin-10 GND ÄÄÄÄÄÄÄÄÄÄÙ³³³³ SCSI ID = 8 ÄÄÄÄÄÄÄÂÄÄÄÙ³³³ or pin-8 BUSY ÄÄÄÄÙ ³³³ SCSI ID = 4 ÄÄÄÄÄÄÄÂÄÄÄÄÙ³³ or pin-6 REFIND+ ÄÙ ³³ SCSI ID = 2 ÄÄÄÄÄÄÄÄÄÄÄÄÄÙ³ SCSI ID = 1 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ SCSI ID = 0 (none) If these ID jumper are used, then ID jumpers shown in left side view J5 or 80 pin I/O cable ARE NOT USED. ST-3620W Hawk 1LP UNFORMATTED CAPACITY (MB) ________________651.8 FORMATTED CAPACITY (xx SECTORS) (MB) _____545.9 AVERAGE SECTORS PER TRACK ________________78 ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________24,300 CYLINDERS ________________________________2,700 user HEADS ______PHYSICAL______________________5 DISCS (3.5 in) ___________________________3 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec)________24.4 to 42.4 EXTERNAL TRANSFER RATE (mbyte/sec) _______20 Sync SPINDLE SPEED (RPM) ______________________5411 AVERAGE LATENCY (mSEC) ___________________5.54 BUFFER ___________________________________256/1024 KByte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 FAST WIDE TPI (TRACKS PER INCH) ____________________3000 AVERAGE ACCESS (ms) (read/write)__________9.3/10.5 Drive level without controller overhead SINGLE TRACK SEEK (ms) (read/write)_______1.2/1.7 MAX FULL SEEK (ms) (read/write)___________19.4/20.4 MTBF (power-on hours) ____________________500,000 POWER REQUIREMENTS: +12V START-UP (amps) _1.9 +12V TYPICAL (amps) __0.37 +5V START-UP (amps) __0.65 +5V TYPICAL (amps) ___0.45 TYPICAL (watts) ______7 MAXIMUM (watts) ______ WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Physical: Height (inches/mm): 1.00/25.4 Width (inches/mm): 4.02/102.1 Depth (inches/mm): 5.77/146.6 Weight (lbs/kg): 1.5/0.68 Already low-level formatted at the factory with 9 spare sector per cylinder and 2 spare cylinders/unit. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (10/24/94) SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1993 ST-3655N Rear View ÚÄ 50 pin SCSI Interface I/O connector ³ ³ DC power (TOP) ÕÍÍÍÍÍÍÍÍÍÍÍÍ ÍÍÍÍÍÍÍÍÍÍ͸ /Ä5ÄGÄGÄ12\ ÍÍÍ͵::::::::::::::::::::::::1Æ͵ 0 0 0 0 ÆÍ (BOTTOM) ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÀÄÄÄÄÄÄÄÄÄÙ ÚÄÄÄÄÄ1 ÚÄÄÄÄÄ1 ÚÄÄÄÄÄ1 ÀÄÄÄÄÄÙ ÀÄÄÄÄÄÙ ÀÄÄÄÄÄÙ Terminating Resistor Packs ST-3655N Left View o o o1 (TOP) o o o Õ͸ Front....ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍØÍØÍØÍÍÍÍ͵ I/O connector ³ ³ ³ Ô; SCSI Address ID 1 ÄÙ ³ ³ ID 2 ÄÄÄÙ ³ ID 4 ÄÄÄÄÄÙ ST-3655N Right View o o4 o o o6 (TOP) Õ͸ 1o³o 1o³o o DC Power ÆÍÍÍÍØÍÍÍÍÍÍ ³ ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ Ô; ³ ³ ³ ÄÄÁÄÄÄÄ ³ Active/Passive Termination ÄÄÁÄÄ ÄÄÂÄÄÄÄ Terminator Power ÚÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÄÄÂÄÄ ³ Active: Pins 1 & 2 shorted ³ ³ ³ only (+2.85V to ³ ³ ³ 110 ê) for FAST ³ ³ ³ SCSI; default. ³ ³ ³Passive: Pins 2 & 4 shorted ³ ³ ³ AND pins 5 & 6 shorted ³ ³ ³ (+5V and GND to ³ ³ ³ 220/330 ê) for ³ ³ ³ standard SCSI. ³ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³Terminator Power: From SCSI Connector ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Pins 1 & 2 ³ ³ From Power Connector (default) ÄÄÄÄÄ Pins 1 & 3 ³ ³ To SCSI Connector Only ÄÄÄÄÄÄÄÄÄÄÄÄÄ Pins 3 & 4 ³ ³ From Power Connector and ÄÄÄÄÄÄÄÄÄÄÄ Pins 1 & 2 AND ³ ³ to SCSI Bus --------------------------- 3 & 4 ³ ³ Terminating Resistors not Installed Ä Pins 2 & 4 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ST-3655N Front View ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ SCSI ID's (none for ID0) ³ not used if ID set on side jumpers ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Ext. Spindle Clock Synch ³ ³ pin-5 is Clock Ground ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄ Remote LED (TOP) ÚÄÁÄ¿ ³ ³ ÚÄÄÄÄÄÄ Reserved 4 2 1 ³ ³ ÚÄÄÄÁÄÄÄ¿ o o o o o-o o o o o 1o o o o o+o o o o o o o o o+ ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ1o o o o-ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ ³ ³ ³ ³ (BOTTOM) ³ ³ ³ ÀÄÄ Remote LED ³ ³ ÀÄÄÄÄ Ext. Spindle Clock Synch ³ ³ pin-5 is Clock Ground ³ ÀÄÄÄÄÄÄ Remote Start Enable ÀÄÄÄÄÄÄÄÄ Parity Enable ST-3655N UNFORMATTED CAPACITY _____________________ FORMATTED CAPACITY (xx SECTORS) __________545.29 AVERAGE SECTORS PER TRACK ________________89 rounded down ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________13,380 CYLINDERS ________________________________2,393 (user) HEADS ____________________________________5 DISCS (3.5 in) ___________________________3 MEDIA TYPE _______________________________THIN FILM HEAD TYPE ________________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec) _______21.6 to 36.3 EXTERNAL TRANSFER RATE (mbyte/sec) _______4 Async EXTERNAL TRANSFER RATE (mbyte/sec) _______10 Sync SPINDLE SPEED (RPM) ______________________4,500 AVERAGE LATENCY (mSEC) ___________________6.67 BUFFER ___________________________________256 Kbyte SeaCache Multisegmented, read look-ahead INTERFACE ________________________________SCSI-2 Fast BYTES PER TRACK __________________________40,754 avg. SECTORS PER DRIVE ________________________1,065,036 TPI (TRACKS PER INCH) ____________________3,000 BPI (BITS PER INCH) ______________________52,602 AVERAGE ACCESS (ms) ______________________12 SINGLE TRACK SEEK (ms) ___________________<4 MAX FULL SEEK (ms) _______________________30 MTBF (power-on hours) Office _____________250,000 POWER REQUIREMENTS: +12V START-UP (amps) _1.9 POWER MANAGEMENT (Watts): ACTIVE _______________5.75 IDLE _________________3.0 WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO IBM AT DRIVE TYPE ________________________0 Formatted at the factory with 2 alternate cylinders. Total physical cylinders equal 2678. Physical: Height (inches/mm): 1.00/25.4 Width (inches/mm): 4.02/102.1 Depth (inches/mm): 5.77/146.6 Weight (lbs/kg): 1.5/0.68 Note: If FAST SCSI transfer rates are used, then the active termination options must be used. If the transfer rates are 5.0 MBytes/sec and below, either method of termination can be used. Although active and passive terminated devices can be installed on the same bus, both ends of the cable should be terminated in the same manner, either both active or both passive. Note: If your application requires no terminators, remove the terminators from the circuit board. Merely removing the terminator power source selection jumper does not disconnect the terminator resistors from the circuit. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (08/08/94) SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-4182N (94161-182) Wren 3 FH SCSI (3 by 5 configuration jumper block) ÚÄÄÄÄÄ Motor Start Option enable (horizontal) ³ ÚÄ N/A ³ ³ ÚÄ Terminator Power from Bus oÁo xÁx oij (upper 2 pins) Ú12ÄGÄGÄ5Ä¿ ÚÄÄÄÄÄÄÄÄ¿ o o o o ÚoÂÙ ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ ³ 0 0 0 0 ³ ³Terminator o o o o ³o³ ³:::SCSI:Cable:::::::::::1³ \ÄÄÄÄÄÄÄÄÄ/ ÀÄÄÄÄÄÄÄÄÙ ÍÍÍÍÍ4Í2Í1ÍPÍÏTÏÍÍÍÏÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÏÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ ÍÍÍÍÍØÍØÍØÍØÍÍØÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ ÀÄÅÄÙ ³ ³ ³ ³ À Terminator Power (+5v) from drive (lower 2 pins) ³ ÀÄÄÄ Parity Check Option Enable (vertical) ÀÄÄÄÄÄÄÄ Drive Select ID's (vertical) (2 by 7 configuration jumper block) 1¿ 1¿ 1¿ Terminator Power ³³--T-Res -- ³³ ³³ from Bus (horizontal) ³³ (3 ea) ³³ ³³ ³ ÀÙ ÀÙ ÀÙ Ú12ÄGÄGÄ5Ä¿ o o o o o oÁo ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ ³ 0 0 0 0 ³ o o o o o x o ³:::SCSI:Cable:::::::::::1³ \ÄÄÄÄÄÄÄÄÄ/ ÍMÍ4Í2Í1ÍPÍTÍTÍÍÏÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÏÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ ÍØÍØÍØÍØÍØÍÍÍØÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ ³ ÀÄÅÄÙ ³ ³ ³ ³ ³ ÀÄ Terminator Power (+5v) from drive (lower 2 pins) ³ ³ ÀÄÄÄÄÄ Parity Check Option Enable (vertical) ³ ÀÄÄÄÄÄÄÄÄÄ Drive Select ID's (vertical) ÀÄÄÄÄÄÄÄÄÄÄÄÄÄ Motor Start Option enable ST-4182N 94161-182 WREN 3 FH UNFORMATTED CAPACITY (MB) ________________182 FORMATTED CAPACITY (35 SECTORS) (MB) _____155 ACTUATOR TYPE ____________________________VOICE COIL TRACKS ___________________________________8,721 CYLINDERS ________________________________969 HEADS ____________________________________9 DISCS ____________________________________5 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________RLL (2,7) TRANSFER RATE (mbytes/sec) _______________1.25 SPINDLE SPEED (RPM) ______________________3,600 AVERAGE LATENCY (mSEC) ___________________8.33 BUFFER ___________________________________8 or 32 Kbyte 8 Kbyte: FIFO, Non-Adaptive, Single-Segmented Buffer 32 Kbyte: Read Look-Ahead, Non-Adaptive, Single-Segmented Buffer INTERFACE ________________________________SCSI TPI (TRACKS PER INCH) ____________________960 BPI (BITS PER INCH) ______________________19,058 AVERAGE ACCESS (ms) ______________________16.5 SINGLE TRACK SEEK (ms) ___________________4 MAX FULL SEEK (ms) _______________________40 MTBF (power-on hours) ____________________100,000 POWER REQUIREMENTS: +12V START-UP (amps) _4.5 +12V TYPICAL (amps) __1.5 +5V START-UP (amps) __1.7 +5V TYPICAL (amps) ___1.3 TYPICAL (watts) ______24 MAXIMUM (watts) ______63 BUFFERED STEP PULSE RATE (micro sec) _____N/A WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Already low-level formatted at the factory. Seagate reserves the right to change, without notice, product offerings or specifications. (9/10/93)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-4350N (94171-350) Wren 4 FH SCSI Connects CHASIS ground to ground lug ÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ Connects SIGNAL ground to ground lug ÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Drive Select ID's ÄÄÄÄÄÄÄ¿ ³ ³ Motor Start Option enable ÄÄÄ¿ ³ G G Parity Check Option enable Ä¿ ³ ÚÄÅÄ¿ Ú1Â2¿ P M 4 2 1 ³o³o³ Ú12ÄGÄGÄ5Ä¿ o o o o o ³o³o³ ³ 0 0 0 0 ³ Power o o o o o ÀÄÁÄÙ \ÄÄÄÄÄÄÄÄÄ/ ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍServoÍPWAÍ ÍÑÍÍÍÍÍÍÍÑÍÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍÑÍÍDataÍPWAÍÍ 1ÄÄÄÄÄÄÄÙ ³:::SCSI Cable::::::::::::1 ³ ÚÄ¿ 1ÄÄÄÄÄÄÄÄÙ Terminator DIP ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ³o³ o Terminator DIP ³oÅÄo ÀÂÙ Terminator power (+5v) from drive (vertical) ÄÄÄÙ Terminator power from the Bus (lower horizontal) ST-4350N 94171-350/M WREN 4 FH UNFORMATTED CAPACITY (MB) ________________350 FORMATTED CAPACITY (xx SECTORS) (MB) _____300 AVERAGE SECTORS PER TRACK ________________46 ACTUATOR TYPE ____________________________VOICE COIL TRACKS ___________________________________12708 CYLINDERS ________________________________1412 HEADS ____________________________________9 DISCS ____________________________________5 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (2,7) TRANSFER RATE (mbytes/sec) _______________1.25-1.875 SPINDLE SPEED (RPM) ______________________3,600 AVERAGE LATENCY (mSEC) ___________________8.33 BUFFER ___________________________________32 Kbyte Read Look-Ahead, Non-Adaptive, Single-Segmented Buffer INTERFACE ________________________________SCSI TPI (TRACKS PER INCH) ____________________1280 BPI (BITS PER INCH) ______________________19058 AVERAGE ACCESS (ms) ______________________16.5 SINGLE TRACK SEEK (ms) ___________________4 MAX FULL SEEK (ms) _______________________43 MTBF (power-on hours) ____________________100,000 POWER REQUIREMENTS: +12V START-UP (amps) _4.5 +12V TYPICAL (amps) __1.5 +5V START-UP (amps) __2.0 +5V TYPICAL (amps) ___1.8 TYPICAL (watts) ______27 MAXIMUM (watts) ______64 BUFFERED STEP PULSE RATE (micro sec) _____ WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE ZBR = Zone Bit Recording = Variable sectors per track Already low-level formatted at the factory. Seagate reserves the right to change, without notice, product offerings or specifications. (6/26/90)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-4376N (94171-376 or -344) Wren 4 FH SCSI Connects CHASIS ground to ground lug ÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ Connects SIGNAL ground to ground lug ÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ Drive Select ID's ÄÄÄÄÄÄÄ¿ ³ ³ Motor Start Option enable ÄÄÄ¿ ³ G G Parity Check Option enable Ä¿ ³ ÚÄÅÄ¿ Ú1Â2¿ P M 4 2 1 ³o³o³ Ú12ÄGÄGÄ5Ä¿ o o o o o ³o³o³ ³ 0 0 0 0 ³ Power o o o o o ÀÄÁÄÙ \ÄÄÄÄÄÄÄÄÄ/ ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍServoÍPWAÍ ÍÑÍÍÍÍÍÍÍÑÍÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍÑÍÍDataÍPWAÍÍ 1ÄÄÄÄÄÄÄÙ ³:::SCSI Cable::::::::::::1 ³ ÚÄ¿ 1ÄÄÄÄÄÄÄÄÙ Terminator DIP ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ³o³ o Terminator DIP ³oÅÄo ÀÂÙ Terminator power (+5v) from drive (vertical) ÄÄÄÙ Terminator power from the Bus (lower horizontal) ST-4376N 94171-376/M WREN 4 FH UNFORMATTED CAPACITY (MB) ________________376 FORMATTED CAPACITY (xx SECTORS) (MB) _____330 AVERAGE SECTORS PER TRACK ________________45 ACTUATOR TYPE ____________________________VOICE COIL TRACKS ___________________________________13914 CYLINDERS ________________________________1549 HEADS ____________________________________9 DISCS ____________________________________5 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (2,7) TRANSFER RATE (mbytes/sec) _______________1.125-1.875 SPINDLE SPEED (RPM) ______________________3,600 AVERAGE LATENCY (mSEC) ___________________8.33 BUFFER ___________________________________32 Kbyte Read Look-Ahead, Non-Adaptive, Single-Segmented Buffer INTERFACE ________________________________SCSI TPI (TRACKS PER INCH) ____________________1280 BPI (BITS PER INCH) ______________________19058 AVERAGE ACCESS (ms) ______________________17.5 SINGLE TRACK SEEK (ms) ___________________4 MAX FULL SEEK (ms) _______________________43 MTBF (power-on hours) ____________________100,000 POWER REQUIREMENTS: +12V START-UP (amps) _4.5 +12V TYPICAL (amps) __1.4 +5V START-UP (amps) __1.9 +5V TYPICAL (amps) ___1.5 TYPICAL (watts) ______27 MAXIMUM (watts) ______64 BUFFERED STEP PULSE RATE (micro sec) _____ WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE ZBR = Zone Bit Recording = Variable sectors per track Already low-level formatted at the factory. Seagate reserves the right to change, without notice, product offerings or specifications. (6/26/90)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-4385N (94181-385H) Wren 5 - Wren Runner 1 - SCSI Power ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ /ÄÄÄÄÄÄÄÄÄ\ ÍÍÍÍÍPÍWÍAÍÍÍÍÍ͵:SCSI:Cable:::::::::::::::::1Æ͵ 0 0 0 0 ÆÍÍ ÚÄ¿ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÀÄ5ÄGÄGÄ12Ù ³o³x o o o o o(o) *ÄÄÄÄÄÄÄ1 *ÄÄÄÄÄÄÄ1 *ÄÄÄÄÄÄÄ1 ÅoÅo o o o o o(o) ÀÄÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÄÙ ÀÄÙ 4 2 1 Terminator SIPS (see note below *) ³ ÄÄÂÄÄ ³ ³ ³ ³ ³ ³ ³ ÀÄReserved (some PWA's do not have these pins) ³ ³ ³ ÀÄÄÄParity check enable ³ ³ ÀÄÄÄÄÄMotor Start option enable ³ ÀÄÄÄÄÄÄÄÄÄDrive ID's, ID 0 (none) if only SCSI device ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄTerminator power from Drive (vertical) Terminator power from Bus (lower horizontal) * Note: If you have #77701215k silk-screened near the 50-pin SCSI cable connector, the pin-1 for the 3 terminating resistors is away from the DC power connector. ST-4385N 94181-385H/M WREN RUNNER FH UNFORMATTED CAPACITY (MB) ________________385 FORMATTED CAPACITY (xx SECTORS) (MB) _____330 AVERAGE SECTORS PER TRACK ________________55 ACTUATOR TYPE ____________________________VOICE COIL TRACKS ___________________________________11865 CYLINDERS ________________________________791 HEADS ____________________________________15 DISCS ____________________________________8 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (2,7) TRANSFER RATE (mbytes/sec) _______________1.875-2 SPINDLE SPEED (RPM) ______________________3,600 AVERAGE LATENCY (mSEC) ___________________8.33 BUFFER ___________________________________32 Kbyte Read Look-Ahead, Non-Adaptive, Single-Segmented Buffer INTERFACE ________________________________SCSI TPI (TRACKS PER INCH) ____________________1280 BPI (BITS PER INCH) ______________________22000 AVERAGE ACCESS (ms) ______________________10.7 SINGLE TRACK SEEK (ms) ___________________3 MAX FULL SEEK (ms) _______________________22.5 MTBF (power-on hours) ____________________100,000 POWER REQUIREMENTS: +12V START-UP (amps) _4.5 +12V TYPICAL (amps) __1.6 +5V START-UP (amps) __1.0 +5V TYPICAL (amps) ___0.7 TYPICAL (watts) ______21 MAXIMUM (watts) ______59 BUFFERED STEP PULSE RATE (micro sec) _____ WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE ZBR = Zone Bit Recording = Variable sectors per track Already low-level formatted at the factory. Seagate reserves the right to change, without notice, product offerings or specifications. (6/26/90)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-4702N (94181-702) Wren 5 SCSI Power ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ /ÄÄÄÄÄÄÄÄÄ\ ÍÍÍÍÍPÍWÍAÍÍÍÍÍ͵:SCSI:Cable:::::::::::::::::1Æ͵ 0 0 0 0 ÆÍÍ ÚÄ¿ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÀÄ5ÄGÄGÄ12Ù ³o³x o o o o o(o) *ÄÄÄÄÄÄÄ1 *ÄÄÄÄÄÄÄ1 *ÄÄÄÄÄÄÄ1 ÅoÅo o o o o o(o) ÀÄÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÄÙ ÀÄÙ 4 2 1 Terminator SIPS (see note below *) ³ ÄÄÂÄÄ ³ ³ ³ ³ ³ ³ ³ ÀÄReserved (some PWA's do not have these pins) ³ ³ ³ ÀÄÄÄParity check enable ³ ³ ÀÄÄÄÄÄMotor Start option enable ³ ÀÄÄÄÄÄÄÄÄÄDrive ID's, ID 0 (none) if only SCSI device ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄTerminator power from Drive (vertical) Terminator power from Bus (lower horizontal) * Note: If you have #77701215k silk-screened near the 50-pin SCSI cable connector, the pin-1 for the 3 terminating resistors is away from the DC power connector. ST-4702N 94181-702/M WREN 5 FH UNFORMATTED CAPACITY (MB) ________________702 FORMATTED CAPACITY (xx SECTORS) (MB) _____601 AVERAGE SECTORS PER TRACK ________________50 ACTUATOR TYPE ____________________________VOICE COIL TRACKS ___________________________________23190 CYLINDERS ________________________________1546 HEADS ____________________________________15 DISCS ____________________________________8 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (2,7) TRANSFER RATE (mbytes/sec) _______________1.5-2 SPINDLE SPEED (RPM) ______________________3,600 AVERAGE LATENCY (mSEC) ___________________8.33 BUFFER ___________________________________32 Kbyte Read Look-Ahead, Non-Adaptive, Single-Segmented Buffer INTERFACE ________________________________SCSI TPI (TRACKS PER INCH) ____________________1280 BPI (BITS PER INCH) ______________________26000 AVERAGE ACCESS (ms) ______________________16.5 SINGLE TRACK SEEK (ms) ___________________3 MAX FULL SEEK (ms) _______________________39 MTBF (power-on hours) ____________________100,000 POWER REQUIREMENTS: +12V START-UP (amps) _4.5 +12V TYPICAL (amps) __1.6 +5V START-UP (amps) __1.0 +5V TYPICAL (amps) ___0.7 TYPICAL (watts) ______21 MAXIMUM (watts) ______59 BUFFERED STEP PULSE RATE (micro sec) _____ WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE ZBR = Zone Bit Recording = Variable sectors per track Already low-level formatted at the factory. Seagate reserves the right to change, without notice, product offerings or specifications. (6/26/90)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-4766N (94191-766) Wren 6 FH SCSI ÚÄÄ Some 16-pin configurations may not have these pins. ³ ³ ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ /Ä4Ä3Ä2Ä1Ä\ ÍÍÍÍÍPÍWÍAÍÍÍÍÍØÍ͵:::SCSI:Cable:::::::::::::::1Æ͵ 0 0 0 0 ÆÍÍ ÚÄ¿ ³ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÀÄ5ÄGÄGÄ12Ù ³o³o o o o o o(o)o ÚÄÄÄÄÄÄÄÄ1ÚÄÄÄÄÄÄÄÄ1ÚÄÄÄÄÄÄÄÄ1 Power ÅoÅo o o o o o(o)o ÀÄÄÄÄÄÄÄÄÙÀÄÄÄÄÄÄÄÄÙÀÄÄÄÄÄÄÄÄÙ ÀÄÙ 4 2 1 M P ³ ³ Terminator Resistor SIPS ³ ÄÄÂÄÄ ³ ³ ³ ³ ³ ³ ³ ³ ³ ÀÄ Reserved ³ ³ ³ ³ ÀÄÄÄ Motor Start Delay ( 16 sec * ID) ³ ³ ³ ÀÄÄÄÄÄ Parity option enable ³ ³ ÀÄÄÄÄÄÄÄ Motor Start option enable ³ ÀÄÄÄÄÄÄÄÄÄÄÄ Drive ID's, ID 0 (none) if only SCSI device ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅ Terminator power from Drive (vertical) À Terminator power from Bus (lower horizontal) ST-4766N 94191-766 WREN 6 FH UNFORMATTED CAPACITY (MB) ________________766 FORMATTED CAPACITY (54 SECTORS) (MB) _____676 ACTUATOR TYPE ____________________________VOICE COIL TRACKS ___________________________________24,480 CYLINDERS ________________________________1,632 HEADS ____________________________________15 DISCS ____________________________________8 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________RLL TRANSFER RATE (mbytes/sec) _______________1.875 SPINDLE SPEED (RPM) ______________________3,600 AVERAGE LATENCY (mSEC) ___________________8.33 BUFFER ___________________________________32 Kbyte Read Look-Ahead, Non-Adaptive, Single-Segmented Buffer INTERFACE ________________________________SCSI TPI (TRACKS PER INCH) ____________________1,459 BPI (BITS PER INCH) ______________________30,500 AVERAGE ACCESS (ms) ______________________15.5 SINGLE TRACK SEEK (ms) ___________________3 MAX FULL SEEK (ms) _______________________37 MTBF (power-on hours) ____________________150,000 POWER REQUIREMENTS: +12V START-UP (amps) _4.5 +12V TYPICAL (amps) __1.5 +5V START-UP (amps) __1.0 +5V TYPICAL (amps) ___0.6 TYPICAL (watts) ______21 MAXIMUM (watts) ______59 BUFFERED STEP PULSE RATE (micro sec) _____N/A WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Already low-level formatted at the factory. Seagate reserves the right to change, without notice, product offerings or specifications. (6/26/90)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-4767N (94601-767H) Wren Runner 2 FH SCSI-2 ÚÄÄ Some 16-pin configurations may not have these pins. ³ ³ ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ /Ä4Ä3Ä2Ä1Ä\ ÍÍÍÍÍPÍWÍAÍÍÍÍÍØÍ͵:::SCSI:Cable:::::::::::::::1Æ͵ 0 0 0 0 ÆÍÍ ÚÄ¿ ³ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÀÄ5ÄGÄGÄ12Ù ³o³o o o o o o(o)o ÚÄÄÄÄÄÄÄÄ1ÚÄÄÄÄÄÄÄÄ1ÚÄÄÄÄÄÄÄÄ1 Power ÅoÅo o o o o o(o)o ÀÄÄÄÄÄÄÄÄÙÀÄÄÄÄÄÄÄÄÙÀÄÄÄÄÄÄÄÄÙ ÀÄÙ 4 2 1 M P ³ ³ Terminator Resistor SIPS ³ ÄÄÂÄÄ ³ ³ ³ ³ ³ ³ ³ ³ ³ ÀÄ Reserved ³ ³ ³ ³ ÀÄÄÄ Motor Start Delay ( 16 sec * ID) ³ ³ ³ ÀÄÄÄÄÄ Parity option enable ³ ³ ÀÄÄÄÄÄÄÄ Motor Start option enable ³ ÀÄÄÄÄÄÄÄÄÄÄÄ Drive ID's, ID 0 (none) if only SCSI device ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅ Terminator power from Drive (vertical) À Terminator power from Bus (lower horizontal) ST-4767N 94601-767H/M WREN RUNNER FH UNFORMATTED CAPACITY (MB) ________________767 FORMATTED CAPACITY (64 SECTORS) (MB) _____665 ACTUATOR TYPE ____________________________VOICE COIL TRACKS ___________________________________20340 CYLINDERS ________________________________1356 HEADS ____________________________________15 DISCS ____________________________________8 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) TRANSFER RATE (mbytes/sec) _______________3 SPINDLE SPEED (RPM) ______________________4,800 AVERAGE LATENCY (mSEC) ___________________6.25 BUFFER ___________________________________256 Kbyte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 TPI (TRACKS PER INCH) ____________________1,600 BPI (BITS PER INCH) ______________________30,600 AVERAGE ACCESS (ms) ______________________11.9 SINGLE TRACK SEEK (ms) ___________________2.5 MAX FULL SEEK (ms) _______________________26 MTBF (power-on hours) ____________________150,000 POWER REQUIREMENTS: +12V START-UP (amps) _4.5 +12V TYPICAL (amps) __1.6 +5V START-UP (amps) __1.1 +5V TYPICAL (amps) ___0.8 TYPICAL (watts) ______27 MAXIMUM (watts) ______60 BUFFERED STEP PULSE RATE (micro sec) _____ WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Already low-level formatted at the factory. Seagate reserves the right to change, without notice, product offerings or specifications. (6/26/90)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1993 ST-5660N Fast SCSI-2 (Decathlon 545 SCSI) ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º ÈÍÍÍÍÍÍÍÍÍÍͼ (front) ID1 o o 50 pin I/O Cable Connection ID2 o o ³ (back) ID4 o oÕÍÍÍÍÍÍÍÍÍÍÍ ÍÍÍÍÍÍÍÍÍÍÍ͸ /ÄÄÄÄÄÄÄÄÄ\ TOP (HDA) ÍÍÍ͵::::::::::::::::::::::::1Æͳ 0 0 0 0 ³ÍÍ J1ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÀÄ5ÄGÄGÄ12Ù BOTTOM ST-5660N ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º Front View º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ SCSI ID's (none for ID0) ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Reserved (TOP) ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄ Remote LED ÚÄÁÄ¿ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄ Reserved 4 2 1 ³ ³ ³ Ú22 Ú34 J8 o o o o o o o o o o o o o o o o Option Block Í1o o o o o o o o o o o o o o o o oÍÍÍÍÍÍÍPWAÍÍÍÍÍÍÍÍÍÍ ³ ³ ³ ³ ÀÂÙ ÀÄÄÄÂÄÄÄÙ (BOTTOM) ³ ³ ³ ³ ³ ÀÄÄÄÄÄ Reserved pin-14 removed ÄÄÙ ³ ³ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄ Terminator power ³ ³ ³ see detail below ÄÄÄÄ¿ ³ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Terminator disable ³ ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Parity Enable ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Remote Start ³ ³ Terminator Power (4 settings) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 22 24 1. 23 & 24 Power from drive power connector o o 2. 21 & 23 Power from SCSI bus 3. 21 & 23 and o o 22 & 24 Power from drive power connector and 21 23 to SCSI bus 4. 22 & 24 Power to SCSI bus only ST-5660N Decathlon 545 SCSI UNFORMATTED CAPACITY _____________________ FORMATTED CAPACITY (xx SECTORS) __________545.29 SECTORS PER TRACK ________________________88 rounded down ACTUATOR TYPE ____________________________ROTARY VOICE COIL CYLINDERS __PHYSICAL______________________3002 HEADS ______PHYSICAL______________________4 DISCS (3.5 in) ___________________________2 MEDIA TYPE _______________________________THIN FILM HEAD TYPE ________________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (Mbits/sec) _______27.6 to 47.2 EXTERNAL TRANSFER RATE (Mbytes/sec) ______5 Async/10 Sync SPINDLE SPEED (RPM) ______________________4,500 AVERAGE LATENCY (mSEC) ___________________6.67 BUFFER ___________________________________256 Kbyte SeaCache Read/Write, Read Look-Ahead, Multi-Segmented INTERFACE ________________________________SCSI-2 Fast SECTORS PER DRIVE ________________________1,065,036 TPI (TRACKS PER INCH) ____________________3,309 BPI (BITS PER INCH) ______________________52,602 AVERAGE ACCESS (ms) ______________________12 SINGLE TRACK SEEK (ms) ___________________3.5 MAX FULL SEEK (ms) _______________________30 MTBF (power-on hours) Office _____________300,000 SHOCK (G's): operating (Read/Write) __________2 nonoperating ____________________75 ACOUSTICS (dBa) __________________________34 POWER DISSIPATION (watts) ________________ POWER REQUIREMENTS: +12V START-UP (amps) _1.9 POWER MANAGEMENT (Watts): ACTIVE _______________5.5 IDLE _________________<2.5 STANDBY ______________0.7 WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO IBM AT DRIVE TYPE ________________________0 Physical: Height (inches/mm): 0.75/19 Width (inches/mm): 4.02/102.1 Depth (inches/mm): 5/127 Weight (lbs/kg): 1.5/0.68 ZBR = Zone Bit Recording = Variable sectors per track Already low-level formatted at the factory. Seagate reserves the right to change, without notice, product offerings or specifications. (08/09/94) SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1993 ST-9235NG ÚÄ 40-pin I/O Connector (* see below) TOP ³ ³ 1 o o o o ÍPÍWÍAÍ :::::::::::.:::::::1 ÍÍø ø ø ø ³ pin-17 removed for keying ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Pin assignments for the Seagate 2.5" drive SCSI interface connector (signal) (pin) (signal) ÚÄÄÄÄÄÄÄÄÄÄ¿ pin Reserved (NC) ³ 1 2 ³ Reserved (ND) ID1 ID2 ID4 Reserved (NC) ³ 3 4 ³ Reserved (ND) ID ÚÄÄÄÄÄÄÄÄÄÄÄ ID1- ³ 5 6 ³ ID2- 0 ³ H H H ID4- ³ 7 8 ³ LED 1 ³ L H H ÀÄÄÄÄÄÄÄÄÄÄÙ 2 ³ H L H ÚÄÄÄÄÄÄÄÄÄÄ¿ 3 ³ L L H +5v ³ 1 2 ³ +5v 4 ³ H H L +5v Ret ³ 3 4 ³ +5v Ret 5 ³ L H L Ground ³ 5 6 ³ DB0- 6 ³ H L L Ground ³ 7 8 ³ DB1- 7 ³ L L L Ground ³ 9 10³ DB2- Ground ³ 11 12³ DB3- H = high Ground ³ 13 14³ DB4- L = low Ground ³ 15 16³ DB5- Connector Key ³ nopin 18³ DB6- Ground ³ 19 20³ DB7- Ground ³ 21 22³ Parity- Ground ³ 23 24³ TRMPWR ATN- ³ 25 26³ BSY- Ground ³ 27 28³ ACK- RST- ³ 29 30³ MSG- Ground ³ 31 32³ SEL- I/O- ³ 33 34³ C/D- Ground ³ 35 36³ REQ- +5v Ret ³ 37 38³ +5v Ret +5v ³ 39 40³ +5v ÀÄÄÄÄÄÄÄÄÄÄÙ ST-9235N UNFORMATTED CAPACITY _____________________ FORMATTED CAPACITY (xx SECTORS) __________209.8 ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________ LOGICAL CYLINDERS ________________________985 LOGICAL HEADS ____________________________13 LOGICAL SECTORS PER TRACK ________________32 HEADS ____________________________________6 DISCS (2.5 in) ___________________________3 MEDIA TYPE _______________________________THIN FILM HEAD TYPE ________________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (2,7) INTERNAL TRANSFER RATE (mbits/sec) _______up to 16 SPINDLE SPEED (RPM) ______________________3,449 AVERAGE LATENCY (mSEC) ___________________8.69 BUFFER ___________________________________128 Kbyte INTERFACE ________________________________SCSI BYTES PER TRACK __________________________ SECTORS PER DRIVE ________________________409,760 TPI (TRACKS PER INCH) ____________________2,750 BPI (BITS PER INCH) ______________________45,500 FCI (FLUX DENSITY) _______________________30,300 AVERAGE ACCESS (ms) ______________________16 SINGLE TRACK SEEK (ms) ___________________5 MAX FULL SEEK (ms) _______________________27 MTBF (power-on hours) Office _____________150,000 SHOCK (G's) operating/nonoperating _______10/150 NG model with 'SafeRite' ______________100/150 POWER REQUIREMENTS: +5V START-UP (amps) __1.3 POWER MANAGEMENT (Watts): ACTIVE _______________2.5 STANDBY ______________1.8 SHUTDOWN _____________1.08 WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO IBM AT DRIVE TYPE ________________________0 Physical: Height (inches/mm): 0.75/19.05 Width (inches/mm): 2.76/70.10 Depth (inches/mm): 4.01/101.85 Weight (ozs/kg): 7.25/0.21 ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (08/17/93)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1993 ST-11200N SCSI-2 Fast (Hawk 1) ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º ÈÍÍÍÍÍÍÍÍÍÍͼ 50 pin I/O Cable Connection ³ J1ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ1¸ /ÄÄÄÄÄÄÄÄÄ\ TOP (HDA) ͵:::::::::::::::::::::::::Æͳ 0 0 0 0 ³ÍÍ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÀÄ5ÄGÄGÄ12Ù BOTTOM 1ÄÄÄÄÄÄ¿ 1ÄÄÄÄÄÄ¿ 1ÄÄÄÄÄÄ¿ ÀÄÄÄÄÄÄÙ ÀÄÄÄÂÄÄÙ ÀÄÄÄÄÄÄÙ ÀTerminating ResistorsÙ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º RIGHT SIDE VIEW º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ BACK Õ͸ J2 12345678 TOP (HDA) FRONT OF J1ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ OF DRIVE Ô; :::::::: BOTTOM DRIVE ³³³³³³³³ ³Terminator Power Ù³³³³³³À Reserved Ú´Terminator Power ÄÙ³³³³ÀÄ Start Delay (12 secs * ID) ³ Factory Use ÄÄÙ³³ÀÄÄ Motor Start ³ Parity Enable ÄÄÄÙÀÄÄÄ Write Protect ³ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÀÄ´ Termination Power-source Table ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ÍÍÍÍÍ....ÍÍÍÍÍ....ÍÍÍÍÍPWA edgeÍÍÍÍÍ ³ ³ ³ ³ 1 2 1 2 1 2 ³ ³ ÖÄ· ÖÄ· ÖÄÄÄ· A Drive Supplies Bus ³ ³ ºøºø øºøº ÓøÄø½ B Drive Supplies Own ³ ³ Óø½ø øÓø½ ø ø C Bus Supplies Drive ³ ³ A B C ³ ÀÄÄÄÄÄÄÄÄÄDefaultÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º LEFT SIDE VIEW º ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ If these ID jumpers are used, then ID jumpers shown in front view ARE NOT USED. FRONT TOP (HDA) J5 ÕÍÍ1¸ Õ͸BACK OF ÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵:::Æ͵J1 OF DRIVE BOTTOM ÔÍÍ; Ô;DRIVE ³³³ Note: On early drives ³ ID 1 ÄÙ³ÀÄ ID 4 with PCB# 75782395 or ³ ID 2 #75782485 ID jumpers areÃÄÄ ID 4 ID 1 reversed. ³ ÉÍÍÍÍÍÍÍÍÍÍÍÍ» º FRONT VIEW º ÈÍÍÍÍÍÍÍÍÍÍÍͼ TOP (HDA) J6 ÕÍÍÍÍÍ1¸ ÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵::::::ÆÍ * BOTTOM ÔÍÍÍÍÍ; ³ 123456 LED ÄÙ ³³³³³³ ID 4 Ù³³³³À Reserved ID 2 ÄÙ³³ÀÄ Remote LED (pin-3 +5v) ID 1 ÄÄÙÀÄÄ Spindle Synchronization (pin-6 REF SIG+) If these ID jumper are used, then ID jumpers shown in left side view ARE NOT USED. ST - 11200N Hawk 1 UNFORMATTED CAPACITY (MB) ________________1,248 FORMATTED CAPACITY (xx SECTORS) (MB) _____1,054 AVERAGE SECTORS PER TRACK ________________73 ACTUATOR TYPE ____________________________VOICE COIL TRACKS ___________________________________28,080 CYLINDERS ________________________________1,872 (user) HEADS ____________________________________15 DISCS (3.5 in) ___________________________8 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec) _______23.2 to 40.6 EXTERNAL TRANSFER RATE (mbyte/sec) _______4 Async EXTERNAL TRANSFER RATE (mbyte/sec) _______10 Sync SPINDLE SPEED (RPM) ______________________5,411 AVERAGE LATENCY (mSEC) ___________________5.4 BUFFER ___________________________________256 Kbyte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 Fast BYTES PER TRACK __________________________41,660 avg. SECTORS PER DRIVE ________________________2,059,139 TPI (TRACKS PER INCH) ____________________2,150 AVERAGE ACCESS (ms) (read/write)__________10.5/11.2 Drive level without controller overhead SINGLE TRACK SEEK (ms) ___________________1.5/2.0 MAX FULL SEEK (ms) _______________________20.0/21.0 MTBF (power-on hours) ____________________200,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.0 +12V TYPICAL (amps) __0.5 +5V TYPICAL (amps) ___0.4 TYPICAL (watts) ______11 IDLE (watts) _________9 LANDING ZONE (cyl)________________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Already low-level formatted at the factory. ZBR = Zone Bit Recording = Variable sectors per track Formatted at the factory with 12 spare sectors per cylinder and two spare cylinders at inner tracks per unit. Seagate reserves the right to change, without notice, product offerings or specifications. (08/09/94) SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-11201N SCSI-2 Fast Wide ST - 11201N UNFORMATTED CAPACITY (MB) ________________1,248 FORMATTED CAPACITY (xx SECTORS) (MB) _____1,054 AVERAGE SECTORS PER TRACK ________________73 ACTUATOR TYPE ____________________________VOICE COIL TRACKS ___________________________________28,080 CYLINDERS ________________________________1,872 (user) HEADS ____________________________________15 DISCS (3.5 in) ___________________________8 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec) _______22 to 40 EXTERNAL TRANSFER RATE (mbyte/sec) _______4 Async EXTERNAL TRANSFER RATE (mbyte/sec) _______10 Sync SPINDLE SPEED (RPM) ______________________5,411 AVERAGE LATENCY (mSEC) ___________________5.4 BUFFER ___________________________________240 Kbyte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 Fast Wide BYTES PER TRACK __________________________41,660 avg. SECTORS PER DRIVE ________________________2,059,139 TPI (TRACKS PER INCH) ____________________2,150 AVERAGE ACCESS (ms) (read/write)__________10.5/12.0 * SINGLE TRACK SEEK (ms) ___________________2.6 * MAX FULL SEEK (ms) _______________________26.6 * MTBF (power-on hours) ____________________200,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.0 +12V TYPICAL (amps) __0.5 +5V TYPICAL (amps) ___0.4 TYPICAL (watts) ______11 IDLE (watts) _________9 LANDING ZONE (cyl)________________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE * Including on-board controller overhead (0.6ms less without overhead). Already low-level formatted at the factory. ZBR = Zone Bit Recording = Variable sectors per track Formatted at the factory with 12 spare sectors per cylinder and two spare cylinders at inner tracks per unit. Seagate reserves the right to change, without notice, product offerings or specifications. (10/22/92)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1993 ST-11900N SCSI-2 Fast (Hawk 2) ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º (ST-11900N only) ÈÍÍÍÍÍÍÍÍÍÍͼ 50 pin I/O Cable Connection ³ J1ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ1¸ /ÄÄÄÄÄÄÄÄÄ\ TOP (HDA) ͵:::::::::::::::::::::::::Æͳ 0 0 0 0 ³ÍÍ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÀÄ5ÄGÄGÄ12Ù BOTTOM ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º (ST-11900NC only) ÈÍÍÍÍÍÍÍÍÍÍͼ 80 pin I/O and DC Power Connection ³ J1 /ÄÄÄijÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ\ TOP (HDA) ÍÍÍÍÍÍÍÍÍÍ/ ×××××××××××××××××××× \ÍÍÍÍÍÍÍÍÍÍ (\Ä1ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ40/) BOTTOM Notes on 80 pin I/O connector: pins 1 - 4 = +12v 41 - 44 = 12v GND 34 - 36 = +5v 74 - 76 = 5v GND 37 = SYNC 77 = LEDC 38 = MTRON 78 = DLYDST 39 = SCSIA0 79 = SCSIA1 40 = SCSIA2 80 = SCSIA3 Mating NC connector: AMP US p/n: 2-557103-1 straight-in, Male 80-pin 2-557101-1 right angle ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º RIGHT SIDE VIEW º (Both ST-11900N and ST-11900NC) ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ BACK Õ͸ J2 12345678 TOP (HDA) FRONT OF J1ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ OF DRIVE Ô; :::::::: BOTTOM DRIVE ³³³³³³³³ ³Terminator Power Ù³³³³³³À Reserved Ú´Terminator Power ÄÙ³³³³ÀÄ Start Delay (12 secs * ID) ³ Enable T-Res ÄÄÙ³³ÀÄÄ Motor Start ³ Parity Enable ÄÄÄÙÀÄÄÄ Write Protect ³ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÀÄ´ Termination Power-source Table ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ÍÍÍÍÍ....ÍÍÍÍÍ....ÍÍÍÍÍPWA edgeÍÍÍÍÍ ³ ³ ³ ³ 1 2 1 2 1 2 ³ ³ ÖÄ· ÖÄ· ÖÄÄÄ· A Drive Supplies Bus ³ ³ ºøºø øºøº ÓøÄø½ B Drive Supplies Own ³ ³ Óø½ø øÓø½ ø ø C Bus Supplies Drive ³ ³ A B C ³ ÀÄÄÄÄÄÄÄÄÄDefaultÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º LEFT SIDE VIEW º (ST-11900N only) ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ If these ID jumpers are used, then ID jumpers shown in front view ARE NOT USED. FRONT TOP (HDA) J5 ÕÍÍ1¸ Õ͸BACK OF ÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵:::Æ͵J1 OF DRIVE BOTTOM ÔÍÍ; Ô;DRIVE ³³³ ID 1 ÄÙ³ÀÄ ID 4 ID 2 ÉÍÍÍÍÍÍÍÍÍÍÍÍ» º FRONT VIEW º (Both ST-11900N and ST-11900NC) ÈÍÍÍÍÍÍÍÍÍÍÍͼ TOP (HDA) J6 ÕÍÍÍÍÍ1¸ ÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵::::::ÆÍ * BOTTOM ÔÍÍÍÍÍ; ³ 123456 LED ÄÙ ³³³³³³ ID 4 Ù³³³³À Reserved ID 2 ÄÙ³³ÀÄ Remote LED (pin-3 +5v) ID 1 ÄÄÙÀÄÄ Spindle Synchronization (pin-6 REF SIG+, default If these ID jumper are used, then jumper installed) ID jumpers shown in left side view J5 or 80 pin I/O cable ARE NOT USED. ST-11900N Hawk 2 UNFORMATTED CAPACITY (MB) ________________2003 FORMATTED CAPACITY (xx SECTORS) (MB) _____1700 AVERAGE SECTORS PER TRACK ________________83 rounded down ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________39,315 CYLINDERS ________________________________2,621 user HEADS ______PHYSICAL______________________15 DISCS (3.5 in) ___________________________8 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec)________26.8 to 45.6 EXTERNAL TRANSFER RATE (mbyte/sec) _______4 Async EXTERNAL TRANSFER RATE (mbyte/sec) _______10 Sync SPINDLE SPEED (RPM) ______________________5,411 AVERAGE LATENCY (mSEC) ___________________5.54 BUFFER ___________________________________256/1024 KByte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 FAST ASA SECTORS PER DRIVE ________________________ TPI (TRACKS PER INCH) ____________________3000 AVERAGE ACCESS (ms) (read/write)__________9.0/10.5 Drive level without controller overhead SINGLE TRACK SEEK (ms) ___________________1 MAX FULL SEEK (ms) _______________________19 MTBF (power-on hours) ____________________500,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.0 +12V TYPICAL (amps) __0.54 +5V START-UP (amps) __0.8 +5V TYPICAL (amps) ___0.43 TYPICAL (watts) ______9 MAXIMUM (watts) ______ WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Physical: Height (inches/mm): 1.63/41.4 Width (inches/mm): 4.00/101.6 Depth (inches/mm): 5.75/146.1 Weight (lbs/kg): 2.5/0.99 Already low-level formatted at the factory with six spare sectors per cylinder and two spare cylinders/unit. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (08/09/94) SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1993 ST-11900W SCSI-2 Fast (Hawk 2) ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º (ST-11900W/WD only) ÈÍÍÍÍÍÍÍÍÍÍͼ (TOP) Auxiliary ___________________ ÚÄÄ Ä1¿/ÍÍÍÍÍÍÍÍÍ\ Í( ×××××××××××××××××1)ͳ::::::³³ 0 0 0 0 ÆÍ \ÄÄÄÄÄÄÄÄÄÄÄijÄÄÄÄ/ À ÄÄ ÙÀÄ5ÄGÄGÄ12Ù 68 pin I/O CableÙ ³³³³³³ ³³³³³³ ³³³³³³ ³³³³³³ Auxiliary option header ³³³³³³ pin-11 +5v ÄÄÄÄÄÄÄÄÄÙ³³³³³ pin-10 GND ÄÄÄÄÄÄÄÄÄÄÙ³³³³ SCSI ID = 8 ÄÄÄÄÄÄÄÄÄÄÄÙ³³³ SCSI ID = 4 ÄÄÄÄÄÄÄÄÄÄÄÄ´³³ or pin-6 REFIND+ ÄÄÄÄÄÄÙ³³ SCSI ID = 2 ÄÄÄÄÄÄÄÄÄÄÄÄÄÙ³ SCSI ID = 1 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ SCSI ID = 0 (none) ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º (ST-11900WC only) ÈÍÍÍÍÍÍÍÍÍÍͼ 80 pin I/O and DC Power Wall/bracket Connection ³ Female J1 /ÄÄÄijÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ\ TOP (HDA) ÍÍÍÍÍÍÍÍÍÍ/ ×××××××××××××××××××× \ÍÍÍÍÍÍÍÍÍÍ (\Ä1ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ40/) BOTTOM Notes on 80 pin I/O connector: pins 1 - 4 = +12v 41 - 44 = 12v GND 34 - 36 = +5v 74 - 76 = 5v GND 37 = SYNC 77 = LEDC 38 = MTRON 78 = DLYDST 39 = SCSIA0 79 = SCSIA1 40 = SCSIA2 80 = SCSIA3 Mating NC connector: AMP US p/n: 2-557103-1 straight-in, Male 80-pin 2-557101-1 right angle to PCB ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º RIGHT SIDE VIEW º (Both ST-11900W and ST-11900WC) ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ BACK Õ͸ J2 12345678 TOP (HDA) FRONT OF J1ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ OF DRIVE Ô; :::::::: BOTTOM DRIVE ³³³³³³³³ ³Terminator Power Ù³³³³³³À Reserved Ú´Terminator Power ÄÙ³³³³ÀÄ Start Delay (12 secs * ID) ³ Enable T-Res ÄÄÙ³³ÀÄÄ Motor Start ³ Parity Enable ÄÄÄÙÀÄÄÄ Write Protect ³ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÀÄ´ Termination Power-source Table ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ÍÍÍÍÍ....ÍÍÍÍÍ....ÍÍÍÍÍPWA edgeÍÍÍÍÍ ³ ³ ³ ³ 1 2 1 2 1 2 ³ ³ ÖÄ· ÖÄ· ÖÄÄÄ· A Drive Supplies Bus ³ ³ ºøºø øºøº ÓøÄø½ B Drive Supplies Own ³ ³ Óø½ø øÓø½ ø ø C Bus Supplies Drive ³ ³ A B C ³ ÀÄÄÄÄÄÄÄÄÄDefaultÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Note: The model ST-11900WC drive cannot furnish terminator power, because no pins on the 80 pin I/O connector are devoted to terminator power. ÉÍÍÍÍÍÍÍÍÍÍÍÍ» º FRONT VIEW º (Both ST-11900W and ST-11900WC) ÈÍÍÍÍÍÍÍÍÍÍÍͼ TOP (HDA) J6 ÕÍÍÍÍÍ1¸ ÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵::::::ÆÍ * BOTTOM ÔÍÍÍÍÍ; ³ ³³³³³³ LED ÄÙ ³³³³³³ ³³³³³³ ³³³³³³ Auxiliary option header ³³³³³³ pin-11 +5v ÄÄÄÄÄÄÄÄÄÙ³³³³³ pin-10 GND ÄÄÄÄÄÄÄÄÄÄÙ³³³³ SCSI ID = 8 ÄÄÄÄÄÄÄÂÄÄÄÙ³³³ or pin-8 BUSY ÄÄÄÄÙ ³³³ SCSI ID = 4 ÄÄÄÄÄÄÄÂÄÄÄÄÙ³³ or pin-6 REFIND+ ÄÙ ³³ SCSI ID = 2 ÄÄÄÄÄÄÄÄÄÄÄÄÄÙ³ SCSI ID = 1 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ SCSI ID = 0 (none) If these ID jumper are used, then ID jumpers shown in left side view J5 or 80 pin I/O cable ARE NOT USED. ST-11900W Hawk 2 UNFORMATTED CAPACITY (MB) ________________2003 FORMATTED CAPACITY (xx SECTORS) (MB) _____1700 AVERAGE SECTORS PER TRACK ________________83 rounded down ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________39,315 CYLINDERS ________________________________2,621 user HEADS ______PHYSICAL______________________15 DISCS (3.5 in) ___________________________8 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec)________26.8 to 45.6 EXTERNAL TRANSFER RATE (mbyte/sec) _______20 Sync SPINDLE SPEED (RPM) ______________________5,411 AVERAGE LATENCY (mSEC) ___________________5.54 BUFFER ___________________________________256/1024 KByte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 FAST WIDE ASA SECTORS PER DRIVE ________________________ TPI (TRACKS PER INCH) ____________________3000 AVERAGE ACCESS (ms) (read/write)__________9.0/10.5 Drive level without controller overhead SINGLE TRACK SEEK (ms) ___________________1 MAX FULL SEEK (ms) _______________________19 MTBF (power-on hours) ____________________500,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.0 +12V TYPICAL (amps) __0.54 +5V START-UP (amps) __0.8 +5V TYPICAL (amps) ___0.43 TYPICAL (watts) ______9 MAXIMUM (watts) ______ WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Physical: Height (inches/mm): 1.63/41.4 Width (inches/mm): 4.00/101.6 Depth (inches/mm): 5.75/146.1 Weight (lbs/kg): 2.5/0.99 Already low-level formatted at the factory with six spare sectors per cylinder and two spare cylinders/unit. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (08/09/94) SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-11950N SCSI-2 Fast (Barracuda 1) ÉÍÍÍÍÍÍÍÍÍÍÍ» J01ÄÄÄÄÄ¿ 1Ä¿ ÄÄÄÄÄÄÄJ4-1ÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ º REAR VIEW º (see 1³¿ ³"³ ³ ÈÍÍÍÍÍÍÍÍÍÍͼ below) ÀÄÙ ³"³ ³ ³"³J4 1-11 ³ Terminating ResistorsÄ¿ ³"³(see detail below) ³ ÚÄÄÄÄÄÄ¿ ÚÄÄÄijĿ ³"³ ³ (TOP) ÀÄÄÄÄÄÄ1 ÀÄÄÄÄÄÄ1 À"ÙÄJ4-11¿ ³ ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÑ/ÍÍÍÍÍÍÍÍÍ\ ³ ³ ͵::::::::::::::::::::::::1Ƴ 0 0 0 0 ÆÍ ³ ³ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͳÍÍÏÀÄ5ÄGÄGÄ12Ù ³ 5 1 50 pin I/O Cable ConnectionÄÙ : : : : : : : : : : : ³ ³ ³ ³ ³ ³ ³ ³ 6 ³ 2 SCSI ID = 0 (none) ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ SCSI ID = 4 ÄÄÄÄÄÄÄÙ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ SCSI ID = 2 ÄÄÄÄÄÄÄÄÄÙ ³ ³ ³ ³ ³ ³ ³ ³ ³ SCSI ID = 1 ÄÄÄÄÄÄÄÄÄÄÄÙ ³ ³ ³ ³ ³ ³ ³ ³ Reserved (default OFF) ÄÄÄÄÄÄÄÄÙ ³ ³ ³ ³ ³ ³ ³ Parity Disable ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ³ ³ ³ ³ ³ Enable Motor Start ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ³ ³ ³ ³ Delay Motor Start (10 sec * ID) ÄÄÄÄÄÙ ³ ³ ³ ³ Write Protect Enable ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ³ ³ Remote LED Connector ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ³ [pin-5 cathode (neg), pin-6 anode (pos)] ³ ³ Reserved (default OFF) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ Spindle Synch Cable Connector ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (pin-1 SSREF, pin-2 ground) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ J01 - Terminator Power Jumpers ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ Terminator power from the drive. Ö1Ä2· (default) ÓøÄø½ ø ø Terminator power from pin 26 on the ÖÄ· SCSI bus. øºøº øÓø½ Terminator to the SCSI bus on pin 26. ÖÄ· ºøºø Óø½ø Terminator power to the SCSI bus and ÖÄÒÄ· drive. ºøºøº Óø½øÐ Note: ST-11950ND (differential model) does not come with any provision to use Termination resistors. Therefore, SCSI bus needs to be externally terminated. ST-11950N UNFORMATTED CAPACITY (MB) ________________2030 FORMATTED CAPACITY (xx SECTORS) (MB) _____1689 AVERAGE SECTORS PER TRACK ________________81 rounded down ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________40,665 CYLINDERS ________________________________2,706 user HEADS ______PHYSICAL______________________15 DISCS (3.5 in) ___________________________8 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec)________34.3 to 56.5 EXTERNAL TRANSFER RATE (mbyte/sec) _______5 Async EXTERNAL TRANSFER RATE (mbyte/sec) _______10 Sync SPINDLE SPEED (RPM) ______________________7,200 AVERAGE LATENCY (mSEC) ___________________4.17 BUFFER ___________________________________1024 KByte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 FAST BYTES PER TRACK __________________________50,888 average SECTORS PER DRIVE ________________________3,291,790 TPI (TRACKS PER INCH) ____________________3,047 BPI (BITS PER INCH) ______________________52,187 AVERAGE ACCESS (ms) (read/write)__________8.0/9.0 Drive level without controller overhead SINGLE TRACK SEEK (ms) ___________________0.6/0.9 MAX FULL SEEK (ms) _______________________17/19 MTBF (power-on hours) ____________________500,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.18 +12V TYPICAL (amps) __0.83 idle +5V START-UP (amps) __1.0 +5V TYPICAL (amps) ___0.76 idle IDLE (watts) _________12.5 LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Physical: Height (inches/mm): 1.63/41.4 Width (inches/mm): 4.00/101.6 Depth (inches/mm): 5.97/151.6 Weight (lbs/kg): 2.3/1.04 Already low-level formatted at the factory with 6 spare sectors per cylinder and 1 spare cylinder/unit. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (08/08/94)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1993 ST-11950W SCSI-2 Fast Wide (Barracuda 1) (aka ST-11951N) J01ÄÄÄÄÄ¿ (see 1³¿ ÉÍÍÍÍÍÍÍÍÍÍÍ» below) ÀÄÙ º REAR VIEW º 1Ä¿ ÄÄÄÄÄÄÄÄJ4-1ÄÄÄÄ¿ ÈÍÍÍÍÍÍÍÍÍÍͼ ³"³ | ³"³J4 1-6 ³ ³"³(see below) | Ã"´ÄJ4-6ÄÄ¿ ³ (TOP) J5 À"Ù-J4-7¿ | | ___________________ ÚÄÄ Ä1¿/ÍÍÍÍÍÍÍÍÍ\ | | | Í( ×××××××××××××××××1)ͳ::::::³³ 0 0 0 0 ÆÍ ³ ³ ³ \ÄÄÄÄÄÄÄÄÄÄÄijÄÄÄÄ/ À ÄÄ ÙÀÄ5ÄGÄGÄ12Ù ³ ³ 1 68 pin I/O CableÙ ³³³³³³ : : : : : : : Connection ³³³³³³ ³ ³ ³ ³ ³ ³ 2 ³³³³³³ Reserved ÄÄÄÄÄÄÙ ³ ³ ³ ³ ³ ³ Spindle Synch Cable Connector ÄÄÙ³³³³³ (some drives do ³ ³ ³ ³ ³ ³ (pin-11 SSREF, pin-12 ground) ³³³³³ not have this ³ ³ ³ ³ ³ ³ Remote LED Connector ÄÄÄÄÄÄÄÄÄÄÄÄÙ³³³³ #7 jumper) ³ ³ ³ ³ ³ ³ [pin-9 cathode (neg), ³³³³ Enable Drive ÄÄÄÄÙ ³ ³ ³ ³ ³ pin-10 anode (pos)] ³³³³ Terminators ³ ³ ³ ³ ³ ³³³³ Reserved ÄÄÄÄÄÄÄÄÄÄÙ ³ ³ ³ ³ SCSI ID = 8 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ³³³ (default OFF) ³ ³ ³ ³ SCSI ID = 4 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ³³ Parity Disable ÄÄÄÄÄÄÙ ³ ³ ³ SCSI ID = 2 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ³ Enable Motor Start ÄÄÄÄÙ ³ ³ SCSI ID = 1 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Delay Motor Start ÄÄÄÄÄÄÄÙ ³ SCSI ID = 0 (none) (10 sec * ID) ³ Write Protect Enable ÄÄÄÄÄÄÙ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ J01 - Terminator Power Jumpers ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ Terminator power from the drive. Ö1ÄÄ· * (default) ÓøÄø½ ø ø Terminator power from pin 26 on the ÖÄ· SCSI bus. øºøº øÓø½ Terminator to the SCSI bus on pin 26. ÖÄ· * ºøºø Óø½ø Terminator power to the SCSI bus and ÖÄÒÄ·* drive. ºøºøº Óø½øÐ * Valid for single ended drives only. Note: ST-11950WD (differential model) does not come with any provision to use Termination resistors. Therefore, SCSI bus needs to be externally terminated. ST-11950W UNFORMATTED CAPACITY (MB) ________________2030 FORMATTED CAPACITY (xx SECTORS) (MB) _____1690 AVERAGE SECTORS PER TRACK ________________81 rounded down ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________40,665 CYLINDERS ________________________________2,706 user HEADS ______PHYSICAL______________________15 DISCS (3.5 in) ___________________________8 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec)________34.3 to 56.5 EXTERNAL TRANSFER RATE (mbyte/sec) _______20 Sync SPINDLE SPEED (RPM) ______________________7,200 AVERAGE LATENCY (mSEC) ___________________4.17 BUFFER __W/WD_____________________________1024/512 KByte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 FAST WIDE BYTES PER TRACK __________________________50,888 average SECTORS PER DRIVE ________________________3,291,790 TPI (TRACKS PER INCH) ____________________3,047 BPI (BITS PER INCH) ______________________52,187 AVERAGE ACCESS (ms) (read/write)__________8.0/9.0 Drive level without controller overhead SINGLE TRACK SEEK (ms) ___________________0.6/0.9 MAX FULL SEEK (ms) _______________________17/19 MTBF (power-on hours) ____________________500,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.18 +12V TYPICAL (amps) __0.83 idle +5V START-UP (amps) __1.0 +5V TYPICAL (amps) ___0.76 idle IDLE (watts) _________12.5 LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Physical: Height (inches/mm): 1.63/41.4 Width (inches/mm): 4.00/101.6 Depth (inches/mm): 5.97/151.6 Weight (lbs/kg): 2.3/1.04 Already low-level formatted at the factory with 6 spare sectors per cylinder and 1 spare cylinders per unit. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (08/08/94) SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1993 ST-12400N SCSI-2 Fast (Hawk 2) ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º (ST-12400N only) ÈÍÍÍÍÍÍÍÍÍÍͼ 50 pin I/O Cable Connection ³ J1ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ1¸ /ÄÄÄÄÄÄÄÄÄ\ TOP (HDA) ͵:::::::::::::::::::::::::Æͳ 0 0 0 0 ³ÍÍ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÀÄ5ÄGÄGÄ12Ù BOTTOM ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º (ST-12400NC only) ÈÍÍÍÍÍÍÍÍÍÍͼ 80 pin I/O and DC Power Connection ³ J1 /ÄÄÄijÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ\ TOP (HDA) ÍÍÍÍÍÍÍÍÍÍ/ ×××××××××××××××××××× \ÍÍÍÍÍÍÍÍÍÍ (\Ä1ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ40/) BOTTOM Notes on 80 pin I/O connector: pins 1 - 4 = +12v 41 - 44 = 12v GND 34 - 36 = +5v 74 - 76 = 5v GND 37 = SYNC 77 = LEDC 38 = MTRON 78 = DLYDST 39 = SCSIA0 79 = SCSIA1 40 = SCSIA2 80 = SCSIA3 Mating NC connector: AMP US p/n: 2-557103-1 straight-in, Male 80-pin 2-557101-1 right angle to PCB ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º RIGHT SIDE VIEW º (Both ST-12400N and ST-12400NC) ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ BACK Õ͸ J2 12345678 TOP (HDA) FRONT OF J1ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ OF DRIVE Ô; :::::::: BOTTOM DRIVE ³³³³³³³³ ³Terminator Power Ù³³³³³³À Reserved Ú´Terminator Power ÄÙ³³³³ÀÄ Start Delay (12 secs * ID) ³ Enable T-Res ÄÄÙ³³ÀÄÄ Motor Start ³ Parity Enable ÄÄÄÙÀÄÄÄ Write Protect ³ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÀÄ´ Termination Power-source Table ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ÍÍÍÍÍ....ÍÍÍÍÍ....ÍÍÍÍÍPWA edgeÍÍÍÍÍ ³ ³ ³ ³ 1 2 1 2 1 2 ³ ³ ÖÄ· ÖÄ· ÖÄÄÄ· A Drive Supplies Bus ³ ³ ºøºø øºøº ÓøÄø½ B Drive Supplies Own ³ ³ Óø½ø øÓø½ ø ø C Bus Supplies Drive ³ ³ A B C ³ ÀÄÄÄÄÄÄÄÄÄDefaultÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º LEFT SIDE VIEW º (ST-12400N only) ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ If these ID jumpers are used, then ID jumpers shown in front view ARE NOT USED. FRONT TOP (HDA) J5 ÕÍÍ1¸ Õ͸BACK OF ÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵:::Æ͵J1 OF DRIVE BOTTOM ÔÍÍ; Ô;DRIVE ³³³ ID 1 ÄÙ³ÀÄ ID 4 ID 2 ÉÍÍÍÍÍÍÍÍÍÍÍÍ» º FRONT VIEW º (Both ST-12400N and ST-12400NC) ÈÍÍÍÍÍÍÍÍÍÍÍͼ TOP (HDA) J6 ÕÍÍÍÍÍ1¸ ÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵::::::ÆÍ * BOTTOM ÔÍÍÍÍÍ; ³ 123456 LED ÄÙ ³³³³³³ ID 4 Ù³³³³À Reserved ID 2 ÄÙ³³ÀÄ Remote LED (pin-3 +5v) ID 1 ÄÄÙÀÄÄ Spindle Synchronization (pin-6 REF SIG+, default If these ID jumper are used, then jumper installed) ID jumpers shown in left side view J5 or 80 pin I/O cable ARE NOT USED. ST-12400N Hawk 2 UNFORMATTED CAPACITY (MB) ________________2537 FORMATTED CAPACITY (xx SECTORS) (MB) _____2148 AVERAGE SECTORS PER TRACK ________________83 rounded down ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________49,799 CYLINDERS ________________________________2,621 user HEADS ______PHYSICAL______________________19 DISCS (3.5 in) ___________________________10 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec)________26.8 to 45.6 EXTERNAL TRANSFER RATE (mbyte/sec) _______5 Async EXTERNAL TRANSFER RATE (mbyte/sec) _______10 Sync SPINDLE SPEED (RPM) ______________________5,411 AVERAGE LATENCY (mSEC) ___________________5.54 BUFFER ___________________________________256/1024 KByte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 FAST ASA SECTORS PER DRIVE ________________________ TPI (TRACKS PER INCH) ____________________3000 AVERAGE ACCESS (ms) (read/write)__________9.0/10.5 Drive level without controller overhead SINGLE TRACK SEEK (ms) ___________________1 MAX FULL SEEK (ms) _______________________19 MTBF (power-on hours) ____________________500,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.0 +12V TYPICAL (amps) __0.54 +5V START-UP (amps) __0.8 +5V TYPICAL (amps) ___0.43 TYPICAL (watts) ______9 MAXIMUM (watts) ______ WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Physical: Height (inches/mm): 1.63/41.4 Width (inches/mm): 4.00/101.6 Depth (inches/mm): 5.75/146.1 Weight (lbs/kg): 2.5/0.99 Already low-level formatted at the factory with twelve spare sectors per cylinder and two spare cylinders/unit. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (08/09/94) SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1994 ST-12400W SCSI-2 Fast Wide (Hawk 2) ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º (ST-12400W/WD only) ÈÍÍÍÍÍÍÍÍÍÍͼ (TOP) J1-Auxiliary ___________________ ÚÄÄ Ä1¿/ÍÍÍÍÍÍÍÍÍ\ Í( ×××××××××××××××××1)ͳ::::::³³ 0 0 0 0 ÆÍ \ÄÄÄÄÄÄÄÄÄÄÄijÄÄÄÄ/ À ÄÄ 2ÙÀÄ5ÄGÄGÄ12Ù 68 pin I/O CableÙ ³³³³³³ ³³³³³³ Auxiliary option header ³³³³³³ SCSI ID = 0 (none) pin-11 +5v ÄÄÄÄÄÄÄÄÄÙ³³³³ÀÄÄÄ SCSI ID = 1 pin-10 GND ÄÄÄÄÄÄÄÄÄÄÙ³³ÀÄÄÄÄ SCSI ID = 2 SCSI ID = 8 ÄÄÄÄÄÄÄÂÄÄÄÙÀÄÂÄÄÄ SCSI ID = 4 or pin-8 BUSY ÄÄÄÄÙ ÀÄÄÄ or pin-6 REFIND+ ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º (ST-12400WC only) ÈÍÍÍÍÍÍÍÍÍÍͼ 80 pin I/O and DC Power Wall/bracket Connection ³ Female J1 /ÄÄÄijÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ\ TOP (HDA) ÍÍÍÍÍÍÍÍÍÍ/ ×××××××××××××××××××× \ÍÍÍÍÍÍÍÍÍÍ (\Ä1ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ40/) BOTTOM Notes on 80 pin I/O connector: pins 1 - 4 = +12v 41 - 44 = 12v GND 34 - 36 = +5v 74 - 76 = 5v GND 37 = SYNC 77 = LEDC 38 = MTRON 78 = DLYDST 39 = SCSIA0 79 = SCSIA1 40 = SCSIA2 80 = SCSIA3 Mating NC connector: AMP US p/n: 2-557103-1 straight-in, Male 80-pin 2-557101-1 right angle to PCB ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º RIGHT SIDE VIEW º (Both ST-12400W and ST-12400WC) ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ BACK Õ͸ J2 12345678 TOP (HDA) FRONT OF J1ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ OF DRIVE Ô; :::::::: BOTTOM DRIVE ³³³³³³³³ ³Terminator Power Ù³³³³³³À Reserved Ú´Terminator Power ÄÙ³³³³ÀÄ Start Delay (12 secs * ID) ³ Enable T-Res ÄÄÙ³³ÀÄÄ Motor Start ³ Parity Enable ÄÄÄÙÀÄÄÄ Write Protect ³ ³ ³ ÚÄST12400W onlyÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÀÄ´ Termination Power-source Table ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ÍÍÍÍÍ....ÍÍÍÍÍ....ÍÍÍÍÍPWA edgeÍÍÍÍÍ ³ ³ ³ ³ 1 2 1 2 1 2 ³ ³ ÖÄ· ÖÄ· ÖÄÄÄ· A Drive Supplies Bus ³ ³ ºøºø øºøº ÓøÄø½ B Drive Supplies Own ³ ³ Óø½ø øÓø½ ø ø C Bus Supplies Drive ³ ³ A B C ³ ÀÄÄÄÄÄÄÄÄÄDefaultÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Note: The model ST-12400WC drive cannot furnish terminator power, because no pins on the 80 pin I/O connector are devoted to terminator power. ÉÍÍÍÍÍÍÍÍÍÍÍÍ» º FRONT VIEW º (ST-12400W only) ÈÍÍÍÍÍÍÍÍÍÍÍͼ TOP (HDA) J6 ÕÍÍÍÍÍ1¸ ÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵::::::ÆÍ * BOTTOM ÔÍÍÍÍÍ2¾ ³ ³³³³³³ LED ÄÙ ³³³³³³ ³³³³³³ Auxiliary option header ³³³³³³ SCSI ID = 0 (none) pin-11 +5v ÄÄÄÄÄÄÄÄÄÙ³³³³ÀÄÄÄ SCSI ID = 1 pin-10 GND ÄÄÄÄÄÄÄÄÄÄÙ³³ÀÄÄÄÄ SCSI ID = 2 SCSI ID = 8 ÄÄÄÄÄÄÄÂÄÄÄÙÀÄÂÄÄÄ SCSI ID = 4 or pin-8 BUSY ÄÄÄÄÙ ÀÄÄÄ or pin-6 REFIND+ If these ID jumper are used, then ID jumpers shown in rear view Aux-J1 or 80 pin I/O cable ARE NOT USED. ÉÍÍÍÍÍÍÍÍÍÍÍÍ» º FRONT VIEW º (ST-12400WC only) ÈÍÍÍÍÍÍÍÍÍÍÍͼ TOP (HDA) J6 ÕÍÍÍÍÍ1¸ ÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵::::::ÆÍ * BOTTOM ÔÍÍÍÍÍ2¾ ³ ³³³³³³ LED ÄÙ ³³³³³³ ³³³³³³ SCSI ID = 8 ÄÄÄÄÄÄÄÄÄÙ³³³³ÀÄÄÄ Remote LED (pin-2 cathode) SCSI ID = 4 ÄÄÄÄÄÄÄÄÄÄÙ³³ÀÄÄÄÄ Sync Spindle SCSI ID = 2 ÄÄÄÄÄÄÄÄÄÄÄÙ³ SCSI ID = 0 (none) ÀÄÄÄÄÄ SCSI ID = 1 ST-12400W Hawk 2 UNFORMATTED CAPACITY (MB) ________________2537 FORMATTED CAPACITY (xx SECTORS) (MB) _____2148 AVERAGE SECTORS PER TRACK ________________84 rounded down ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________49,799 CYLINDERS ________________________________2,621 user HEADS ______PHYSICAL______________________19 DISCS (3.5 in) ___________________________10 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec)________26.8 to 45.6 EXTERNAL TRANSFER RATE (mbyte/sec) _______20 Sync SPINDLE SPEED (RPM) ______________________5,411 AVERAGE LATENCY (mSEC) ___________________5.54 BUFFER ___________________________________256/1024 KByte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 FAST ASA SECTORS PER DRIVE ________________________ TPI (TRACKS PER INCH) ____________________3000 AVERAGE ACCESS (ms) (read/write)__________9.3/10.8 Drive level without controller overhead SINGLE TRACK SEEK (ms) ___________________1 MAX FULL SEEK (ms) _______________________21 MTBF (power-on hours) ____________________500,000 SHOCK (G's): operating (Read/Write) __________10 nonoperating ____________________60 ACOUSTICS (typ/max dBA) __________________ POWER REQUIREMENTS: +12V START-UP (amps) _2.4 +12V TYPICAL (amps) __0.57 +5V START-UP (amps) __0.8 +5V TYPICAL (amps) ___0.42 TYPICAL (watts) ______8.9 MAXIMUM (watts) ______10.8 WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Physical: Height (inches/mm): 1.63/41.4 Width (inches/mm): 4.00/101.6 Depth (inches/mm): 5.75/146.1 Weight (lbs/kg): 2.5/0.99 Already low-level formatted at the factory with twelve spare sectors per cylinder and two spare cylinders/unit. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (08/26/94) SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-12401N SCSI-2 Fast Wide ST-12401N UNFORMATTED CAPACITY (MB) ________________2500 FORMATTED CAPACITY (xx SECTORS) (MB) _____2100 AVERAGE SECTORS PER TRACK ________________ ACTUATOR TYPE ____________________________STRAIGHT ARM TRACKS ___________________________________49,894 CYLINDERS __PHYSICAL______________________2,626 HEADS ______PHYSICAL______________________19 DISCS (3.5 in) ___________________________10 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) TRANSFER RATE INTERNAL (mbits/sec)________25 to 41 SPINDLE SPEED (RPM) ______________________5,411 AVERAGE LATENCY (mSEC) ___________________5.54 BUFFER ___________________________________256/1024 KByte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 FAST WIDE SECTORS PER DRIVE ________________________ TPI (TRACKS PER INCH) ____________________ AVERAGE ACCESS (ms) (read/write)__________9.0/10.5 Drive level without controller overhead SINGLE TRACK SEEK (ms) ___________________2 MAX FULL SEEK (ms) _______________________22 MTBF (power-on hours) ____________________500,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.0 +12V TYPICAL (amps) __0.5 +5V START-UP (amps) __ +5V TYPICAL (amps) ___0.24 TYPICAL (watts) ______9 MAXIMUM (watts) ______ WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Physical: Height (inches/mm): 1.63/41.4 Width (inches/mm): 4.00/101.6 Depth (inches/mm): 5.75/146.1 Weight (lbs/kg): 2.0/0.99 Already low-level formatted at the factory with one spare sector per track and two spare cylinders/unit. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (12/08/92)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1993 ST-12450W SCSI-2 Fast Wide (Barracuda 2, 2HP) 2HP = 2 Head Parallel = two read write channels at once J01ÄÄÄÄÄ¿ (see 1³¿ ÉÍÍÍÍÍÍÍÍÍÍÍ» below) ÀÄÙ º REAR VIEW º 1Ä¿ ÄÄÄÄÄÄÄÄJ4-1ÄÄÄÄ¿ ÈÍÍÍÍÍÍÍÍÍÍͼ ³"³ | ³"³J4 1-6 ³ ³"³(see below) | Ã"´ÄJ4-6ÄÄ¿ ³ (TOP) J5 À"Ù-J4-8¿ | | ___________________ ÚÄÄ Ä1¿/ÍÍÍÍÍÍÍÍÍ\ | | | Í( ×××××××××××××××××1)ͳ::::::³³ 0 0 0 0 ÆÍ ³ ³ ³ \ÄÄÄÄÄÄÄÄÄÄÄijÄÄÄÄ/ À ÄÄ ÙÀÄ5ÄGÄGÄ12Ù ³ ³ 1 68 pin I/O CableÙ ³³³³³³ : : : : : : : Connection ³³³³³³ ³ ³ ³ ³ ³ ³ 2 ³³³³³³ Reserved ÄÄÄÄÄÄÙ ³ ³ ³ ³ ³ ³ Spindle Synch Cable Connector ÄÄÙ³³³³³ (J4-7 and J4-8 ³ ³ ³ ³ ³ ³ (pin-11 SSREF, pin-12 ground) ³³³³³ are reserved) ³ ³ ³ ³ ³ ³ Remote LED Connector ÄÄÄÄÄÄÄÄÄÄÄÄÙ³³³³ ³ ³ ³ ³ ³ ³ [pin-9 cathode (neg), ³³³³ Enable Drive ÄÄÄÄÙ ³ ³ ³ ³ ³ pin-10 anode (pos)] ³³³³ Terminators ³ ³ ³ ³ ³ ³³³³ Reserved ÄÄÄÄÄÄÄÄÄÄÙ ³ ³ ³ ³ SCSI ID = 8 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ³³³ (default OFF) ³ ³ ³ ³ SCSI ID = 4 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ³³ Parity Disable ÄÄÄÄÄÄÙ ³ ³ ³ SCSI ID = 2 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ³ Enable Motor Start ÄÄÄÄÙ ³ ³ SCSI ID = 1 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Delay Motor Start ÄÄÄÄÄÄÄÙ ³ SCSI ID = 0 (none) (10 sec * ID) ³ Write Protect Enable ÄÄÄÄÄÄÙ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ J01 - Terminator Power Jumpers ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ Terminator power from the drive. Ö1ÄÄ· * (default) ÓøÄø½ ø ø Terminator power from pin 26 on the ÖÄ· SCSI bus. øºøº øÓø½ Terminator to the SCSI bus on pin 26. ÖÄ· * ºøºø Óø½ø Terminator power to the SCSI bus and ÖÄÒÄ·* drive. ºøºøº Óø½øÐ * Valid for single ended drives only. Note: ST-12450WD (differential model) does not come with any provision to use Termination resistors. Therefore, SCSI bus needs to be externally terminated. ST-12450W UNFORMATTED CAPACITY (MB) ________________2437 FORMATTED CAPACITY (xx SECTORS) (MB) _____1849 Standard OEM model formatted to 512 bytes/block AVERAGE SECTORS PER TRACK ________________149 rounded down ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________48,726 CYLINDERS ________________________________2,710 user HEADS ______PHYSICAL/LOGICAL______________18/9 DISCS (3.5 in) ___________________________10 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec): Per Logical Head _______________________68.6 to 113.0 Per Physical Head ______________________34.3 to 56.5 EXTERNAL TRANSFER RATE (mbyte/sec) _______20 Sync SPINDLE SPEED (RPM) ______________________7,200 AVERAGE LATENCY (mSEC) ___________________4.17 BUFFER ___________________________________1024 KByte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 FAST WIDE ASA BYTES PER TRACK __________________________99,536 average SECTORS PER DRIVE ________________________3,957,500 TPI (TRACKS PER INCH) ____________________3,047 BPI (BITS PER INCH) ______________________52,187 AVERAGE ACCESS (ms) (read/write)__________8.0/9.0 Drive level without controller overhead SINGLE TRACK SEEK (ms) ___________________0.6/0.9 MAX FULL SEEK (ms) _______________________17/19 MTBF (power-on hours) ____________________500,000 SHOCK (G's): operating (Read/Write) __________2 nonoperating ____________________50 ACOUSTICS (typ/max dBA) __________________4.7/ POWER REQUIREMENTS: +12V START-UP (amps) _2.18 +12V TYPICAL (amps) __0.83 idle +5V START-UP (amps) __1.0 +5V TYPICAL (amps) ___0.76 idle IDLE (watts) _________13.5 LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Physical: Height (inches/mm): 1.63/41.4 Width (inches/mm): 4.00/101.6 Depth (inches/mm): 5.97/151.6 Weight (lbs/kg): 2.3/1.04 Already low-level formatted at the factory with 9 spare sectors per cylinder and 1 spare cylinder per unit. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (08/26/94) SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1993 ST-12550N SCSI-2 Fast (Barracuda 2) ÉÍÍÍÍÍÍÍÍÍÍÍ» J01ÄÄÄÄÄ¿ 1Ä¿ ÄÄÄÄÄÄÄJ4-1ÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ º REAR VIEW º (see 1³¿ ³"³ ³ ÈÍÍÍÍÍÍÍÍÍÍͼ below) ÀÄÙ ³"³ ³ ³"³J4 1-11 ³ Terminating ResistorsÄ¿ ³"³(see detail below) ³ ÚÄÄÄÄÄÄ¿ ÚÄÄÄijĿ ³"³ ³ (TOP) ÀÄÄÄÄÄÄ1 ÀÄÄÄÄÄÄ1 À"ÙÄJ4-11¿ ³ ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÑ/ÍÍÍÍÍÍÍÍÍ\ ³ ³ ͵::::::::::::::::::::::::1Ƴ 0 0 0 0 ÆÍ ³ ³ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͳÍÍÏÀÄ5ÄGÄGÄ12Ù ³ 5 1 50 pin I/O Cable ConnectionÄÙ : : : : : : : : : : : ³ ³ ³ ³ ³ ³ ³ ³ 6 ³ 2 SCSI ID = 0 (none) ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ SCSI ID = 4 ÄÄÄÄÄÄÄÙ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ SCSI ID = 2 ÄÄÄÄÄÄÄÄÄÙ ³ ³ ³ ³ ³ ³ ³ ³ ³ SCSI ID = 1 ÄÄÄÄÄÄÄÄÄÄÄÙ ³ ³ ³ ³ ³ ³ ³ ³ Reserved (default OFF) ÄÄÄÄÄÄÄÄÙ ³ ³ ³ ³ ³ ³ ³ Parity Disable ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ³ ³ ³ ³ ³ Enable Motor Start ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ³ ³ ³ ³ Delay Motor Start (10 sec * ID) ÄÄÄÄÄÙ ³ ³ ³ ³ Write Protect Enable ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ³ ³ Remote LED Connector ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ³ [pin-5 cathode (neg), pin-6 anode (pos)] ³ ³ Reserved (default OFF) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ Spindle Synch Cable Connector ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (pin-1 SSREF, pin-2 ground) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ J01 - Terminator Power Jumpers ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ Terminator power from the drive. Ö1Ä2· (default) ÓøÄø½ ø ø Terminator power from pin 26 on the ÖÄ· SCSI bus. øºøº øÓø½ Terminator to the SCSI bus on pin 26. ÖÄ· ºøºø Óø½ø Terminator power to the SCSI bus and ÖÄÒÄ· drive. ºøºøº Óø½øÐ Note: ST-12550ND (differential model) does not come with any provision to use Termination resistors. Therefore, SCSI bus needs to be externally terminated. ST-12550N UNFORMATTED CAPACITY (MB) ________________2572 FORMATTED CAPACITY (xx SECTORS) (MB) _____2139 AVERAGE SECTORS PER TRACK ________________81 rounded down ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________51,433 CYLINDERS ________________________________2,707 user HEADS ______PHYSICAL______________________19 DISCS (3.5 in) ___________________________10 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec)________34.3 to 56.5 EXTERNAL TRANSFER RATE (mbyte/sec) _______4 Async EXTERNAL TRANSFER RATE (mbyte/sec) _______10 Sync SPINDLE SPEED (RPM) ______________________7,200 AVERAGE LATENCY (mSEC) ___________________4.17 BUFFER ___________________________________1024 KByte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 FAST ASA BYTES PER TRACK __________________________50,888 average SECTORS PER DRIVE ________________________4,177,781 TPI (TRACKS PER INCH) ____________________3,047 BPI (BITS PER INCH) ______________________52,187 AVERAGE ACCESS (ms) (read/write)__________8.0/9.0 Drive level without controller overhead SINGLE TRACK SEEK (ms) ___________________0.6/0.9 MAX FULL SEEK (ms) _______________________17/19 MTBF (power-on hours) ____________________500,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.18 +12V TYPICAL (amps) __0.83 idle +5V START-UP (amps) __1.0 +5V TYPICAL (amps) ___0.76 idle IDLE (watts) _________13 LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Physical: Height (inches/mm): 1.63/41.4 Width (inches/mm): 4.00/101.6 Depth (inches/mm): 5.97/151.6 Weight (lbs/kg): 2.3/1.04 Already low-level formatted at the factory with 9 spare sectors per cylinder and 1 spare cylinder per unit. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (08/08/94)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1993 ST-12550W SCSI-2 Fast Wide (Barracuda 2) (aka ST-12551N) J01ÄÄÄÄÄ¿ (see 1³¿ ÉÍÍÍÍÍÍÍÍÍÍÍ» below) ÀÄÙ º REAR VIEW º 1Ä¿ ÄÄÄÄÄÄÄÄJ4-1ÄÄÄÄ¿ ÈÍÍÍÍÍÍÍÍÍÍͼ ³"³ | ³"³J4 1-6 ³ ³"³(see below) | Ã"´ÄJ4-6ÄÄ¿ ³ (TOP) J5 À"Ù-J4-7¿ | | ___________________ ÚÄÄ Ä1¿/ÍÍÍÍÍÍÍÍÍ\ | | | Í( ×××××××××××××××××1)ͳ::::::³³ 0 0 0 0 ÆÍ ³ ³ ³ \ÄÄÄÄÄÄÄÄÄÄÄijÄÄÄÄ/ À ÄÄ ÙÀÄ5ÄGÄGÄ12Ù ³ ³ 1 68 pin I/O CableÙ ³³³³³³ : : : : : : : Connection ³³³³³³ ³ ³ ³ ³ ³ ³ 2 ³³³³³³ Reserved ÄÄÄÄÄÄÙ ³ ³ ³ ³ ³ ³ Spindle Synch Cable Connector ÄÄÙ³³³³³ (some drives do ³ ³ ³ ³ ³ ³ (pin-11 SSREF, pin-12 ground) ³³³³³ not have this ³ ³ ³ ³ ³ ³ Remote LED Connector ÄÄÄÄÄÄÄÄÄÄÄÄÙ³³³³ #7 jumper) ³ ³ ³ ³ ³ ³ [pin-9 cathode (neg), ³³³³ Enable Drive ÄÄÄÄÙ ³ ³ ³ ³ ³ pin-10 anode (pos)] ³³³³ Terminators ³ ³ ³ ³ ³ ³³³³ Reserved ÄÄÄÄÄÄÄÄÄÄÙ ³ ³ ³ ³ SCSI ID = 8 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ³³³ (default OFF) ³ ³ ³ ³ SCSI ID = 4 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ³³ Parity Disable ÄÄÄÄÄÄÙ ³ ³ ³ SCSI ID = 2 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ³ Enable Motor Start ÄÄÄÄÙ ³ ³ SCSI ID = 1 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Delay Motor Start ÄÄÄÄÄÄÄÙ ³ SCSI ID = 0 (none) (10 sec * ID) ³ Write Protect Enable ÄÄÄÄÄÄÙ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ J01 - Terminator Power Jumpers ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ Terminator power from the drive. Ö1ÄÄ· * (default) ÓøÄø½ ø ø Terminator power from pin 26 on the ÖÄ· SCSI bus. øºøº øÓø½ Terminator to the SCSI bus on pin 26. ÖÄ· * ºøºø Óø½ø Terminator power to the SCSI bus and ÖÄÒÄ·* drive. ºøºøº Óø½øÐ * Valid for single ended drives only. Note: ST-12550WD (differential model) does not come with any provision to use Termination resistors. Therefore, SCSI bus needs to be externally terminated. ST-12550W UNFORMATTED CAPACITY (MB) ________________2572 FORMATTED CAPACITY (xx SECTORS) (MB) _____2139 AVERAGE SECTORS PER TRACK ________________81 rounded down ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________51,433 CYLINDERS ________________________________2,707 user HEADS ______PHYSICAL______________________19 DISCS (3.5 in) ___________________________10 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec)________34.3 to 56.5 EXTERNAL TRANSFER RATE (mbyte/sec) _______20 Sync SPINDLE SPEED (RPM) ______________________7,200 AVERAGE LATENCY (mSEC) ___________________4.17 BUFFER __W/WD_____________________________1024/512 KByte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 FAST WIDE ASA BYTES PER TRACK __________________________50,888 average SECTORS PER DRIVE ________________________4,177,781 TPI (TRACKS PER INCH) ____________________3,047 BPI (BITS PER INCH) ______________________52,187 AVERAGE ACCESS (ms) (read/write)__________8.0/9.0 Drive level without controller overhead SINGLE TRACK SEEK (ms) ___________________0.6/0.9 MAX FULL SEEK (ms) _______________________17/19 MTBF (power-on hours) ____________________500,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.18 +12V TYPICAL (amps) __0.83 idle +5V START-UP (amps) __1.0 +5V TYPICAL (amps) ___0.76 idle IDLE (watts) _________13 LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Physical: Height (inches/mm): 1.63/41.4 Width (inches/mm): 4.00/101.6 Depth (inches/mm): 5.97/151.6 Weight (lbs/kg): 2.3/1.04 Already low-level formatted at the factory with 9 spare sectors per cylinder and 1 spare cylinder per unit. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (08/04/94) SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1993 ST-15150N SCSI-2 Fast (Barracuda 4) ÉÍÍÍÍÍÍÍÍÍÍÍ» J01ÄÄÄÄÄ¿ 1Ä¿ ÄÄÄÄÄÄÄJ4-1ÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ º REAR VIEW º (see Úij¿ ³"³ ³ ÈÍÍÍÍÍÍÍÍÍÍͼ below)ÀÄÄÙ ³"³ ³ ³"³J4 1-11 ³ ³"³(see detail below) ³ ³"³ ³ (TOP) À"ÙÄJ4-11¿ ³ ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÑ/ÍÍÍÍÍÍÍÍÍ\ ³ ³ ͵::::::::::::::::::::::::1Ƴ 0 0 0 0 ÆÍ ³ ³ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͳÍÍÏÀÄ5ÄGÄGÄ12Ù ³ 5 1 50 pin I/O Cable ConnectionÄÙ : : : : : : : : : : : ³ ³ ³ ³ ³ ³ ³ ³ 6 ³ 2 SCSI ID = 0 (none) ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ SCSI ID = 4 ÄÄÄÄÄÄÄÙ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ SCSI ID = 2 ÄÄÄÄÄÄÄÄÄÙ ³ ³ ³ ³ ³ ³ ³ ³ ³ SCSI ID = 1 ÄÄÄÄÄÄÄÄÄÄÄÙ ³ ³ ³ ³ ³ ³ ³ ³ Reserved (default OFF) ÄÄÄÄÄÄÄÄÙ ³ ³ ³ ³ ³ ³ ³ Parity Disable ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ³ ³ ³ ³ ³ Enable Motor Start ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ³ ³ ³ ³ Delay Motor Start (10 sec * ID) ÄÄÄÄÄÙ ³ ³ ³ ³ Write Protect Enable ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ³ ³ Remote LED Connector ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ ³ [pin-5 cathode (neg), pin-6 anode (pos)] ³ ³ Reserved (default OFF) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ Spindle Synch Cable Connector ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (pin-1 SSREF, pin-2 ground) ÚÄ ST-15150N only ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ J01 - Terminator Power 2x3 jumper block ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 2Õ͸ Enable Drive Terminators ³ø³ø ø 1Ôø¾ø ø Terminator power from the drive. ÕÍÍ͸ (default) øÔøÍø¾ 1ø ø ø Terminator power from pin 26 on the Õ͸ SCSI bus. ø ø³ø³ 1ø øÔø¾ Terminator to the SCSI bus on pin 26. Õ͸ ø³ø³ø 1øÔø¾ø Terminator power to the SCSI bus and ÕÍÑ͸ drive. ø³ø³ø³ 1øÔøÏø¾ Note: ST-15150ND (differential model) does not come with any provision to use Termination resistors. Therefore, SCSI bus needs to be externally terminated. ÚÄ ST-15150ND only ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ J01 - Terminator Power 2x2 jumper block ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ 1Õ͸ 2 Terminator to the SCSI bus on pin 26. ³ø³ø (all other J01 jumper positions are Ôø¾ø invalid) ST-15150N UNFORMATTED CAPACITY (MB) ________________5062 FORMATTED CAPACITY (xx SECTORS) (MB) _____4294 AVERAGE SECTORS PER TRACK ________________107 rounded down ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________77,931 CYLINDERS ________________________________3,711 user HEADS ______PHYSICAL______________________21 DISCS (3.5 in) ___________________________11 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec)________47.4 to 71.9 EXTERNAL TRANSFER RATE (mbyte/sec) _______4 Async EXTERNAL TRANSFER RATE (mbyte/sec) _______10 Sync SPINDLE SPEED (RPM) ______________________7,200 AVERAGE LATENCY (mSEC) ___________________4.17 BUFFER ___________________________________1024 KByte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 FAST ASA II BYTES PER TRACK __________________________64,773 average SECTORS PER DRIVE ________________________7,812,500 TPI (TRACKS PER INCH) ____________________4,048 BPI (BITS PER INCH) ______________________73,820 AVERAGE ACCESS (ms) (read/write)__________8.0/9.0 Drive level without controller overhead SINGLE TRACK SEEK (ms) ___________________0.6/0.9 MAX FULL SEEK (ms) _______________________17/19 MTBF (power-on hours) ____________________800,000 SHOCK (G's): operating (Read/Write) __________2 nonoperating ____________________50 ACOUSTICS (typ/max dBA) __________________4.7/ POWER REQUIREMENTS: +12V START-UP (amps) _2.18 +12V TYPICAL (amps) __0.83 idle +5V START-UP (amps) __1.0 +5V TYPICAL (amps) ___0.76 idle IDLE (watts) _________14 LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Physical: Height (inches/mm): 1.63/41.4 Width (inches/mm): 4.00/101.6 Depth (inches/mm): 5.97/151.6 Weight (lbs/kg): 2.3/1.04 Already low-level formatted at the factory with 9 spare sectors per cylinder and 1 spare cylinder per unit. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (08/26/94)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1993 ST-15150W SCSI-2 Fast Wide (Barracuda 4) J01ÄÄÄÄÄ¿ (see 1³¿ ÉÍÍÍÍÍÍÍÍÍÍÍ» below) ÀÄÙ º REAR VIEW º 1Ä¿ ÄÄÄÄÄÄÄÄJ4-1ÄÄÄÄ¿ ÈÍÍÍÍÍÍÍÍÍÍͼ ³"³ | ³"³J4 1-6 ³ ³"³(see below) | Ã"´ÄJ4-6ÄÄ¿ ³ (TOP) J5 À"Ù-J4-7¿ | | ___________________ ÚÄÄ Ä1¿/ÍÍÍÍÍÍÍÍÍ\ | | | Í( ×××××××××××××××××1)ͳ::::::³³ 0 0 0 0 ÆÍ ³ ³ ³ \ÄÄÄÄÄÄÄÄÄÄÄijÄÄÄÄ/ À ÄÄ ÙÀÄ5ÄGÄGÄ12Ù ³ ³ 1 68 pin I/O CableÙ ³³³³³³ : : : : : : : Connection ³³³³³³ ³ ³ ³ ³ ³ ³ 2 ³³³³³³ Reserved ÄÄÄÄÄÄÙ ³ ³ ³ ³ ³ ³ Spindle Synch Cable Connector ÄÄÙ³³³³³ (some drives do ³ ³ ³ ³ ³ ³ (pin-11 SSREF, pin-12 ground) ³³³³³ not have this ³ ³ ³ ³ ³ ³ Remote LED Connector ÄÄÄÄÄÄÄÄÄÄÄÄÙ³³³³ #7 jumper) ³ ³ ³ ³ ³ ³ [pin-9 cathode (neg), ³³³³ Enable Drive ÄÄÄÄÙ ³ ³ ³ ³ ³ pin-10 anode (pos)] ³³³³ Terminators ³ ³ ³ ³ ³ ³³³³ Reserved ÄÄÄÄÄÄÄÄÄÄÙ ³ ³ ³ ³ SCSI ID = 8 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ³³³ (default OFF) ³ ³ ³ ³ SCSI ID = 4 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ³³ Parity Disable ÄÄÄÄÄÄÙ ³ ³ ³ SCSI ID = 2 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ³ Enable Motor Start ÄÄÄÄÙ ³ ³ SCSI ID = 1 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Delay Motor Start ÄÄÄÄÄÄÄÙ ³ SCSI ID = 0 (none) (10 sec * ID) ³ Write Protect Enable ÄÄÄÄÄÄÙ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ J01 - Terminator Power Jumpers ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ Terminator power from the drive. Ö1ÄÄ· * (default) ÓøÄø½ ø ø Terminator power from pin 26 on the ÖÄ· SCSI bus. øºøº øÓø½ Terminator to the SCSI bus on pin 26. ÖÄ· * ºøºø Óø½ø Terminator power to the SCSI bus and ÖÄÒÄ·* drive. ºøºøº Óø½øÐ * Valid for single ended drives only. Note: ST-15150WD (differential model) does not come with any provision to use Termination resistors. Therefore, SCSI bus needs to be externally terminated. ST-15150W UNFORMATTED CAPACITY (MB) ________________5048 FORMATTED CAPACITY (xx SECTORS) (MB) _____4294 AVERAGE SECTORS PER TRACK ________________107 rounded down ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________77,931 CYLINDERS ________________________________3,711 user HEADS ______PHYSICAL______________________21 DISCS (3.5 in) ___________________________11 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec)________47.4 to 71.9 EXTERNAL TRANSFER RATE (mbyte/sec) _______20 Sync SPINDLE SPEED (RPM) ______________________7,200 AVERAGE LATENCY (mSEC) ___________________4.17 BUFFER ___________________________________1024 KByte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 FAST WIDE ASA II BYTES PER TRACK __________________________64,773 average SECTORS PER DRIVE ________________________7,812,500 TPI (TRACKS PER INCH) ____________________4,048 BPI (BITS PER INCH) ______________________52,187 AVERAGE ACCESS (ms) (read/write)__________8.0/9.0 Drive level without controller overhead SINGLE TRACK SEEK (ms) ___________________0.6/0.9 MAX FULL SEEK (ms) _______________________17/19 MTBF (power-on hours) ____________________800,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.18 +12V TYPICAL (amps) __0.83 idle +5V START-UP (amps) __1.0 +5V TYPICAL (amps) ___0.76 idle IDLE (watts) _________14 LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Physical: Height (inches/mm): 1.63/41.4 Width (inches/mm): 4.00/101.6 Depth (inches/mm): 5.97/151.6 Weight (lbs/kg): 2.3/1.04 Already low-level formatted at the factory with 9 spare sectors per cylinder and 1 spare cylinder per unit. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (08/08/94) SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1994 ST-15230N SCSI-2 Fast (Hawk 4) ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º (ST-15230N only) ÈÍÍÍÍÍÍÍÍÍÍͼ 50 pin I/O Cable Connection ³ J1ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ1¸ /ÄÄÄÄÄÄÄÄÄ\ TOP (HDA) ͵:::::::::::::::::::::::::Æͳ 0 0 0 0 ³ÍÍ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÀÄ5ÄGÄGÄ12Ù BOTTOM ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º (ST-15230NC only) ÈÍÍÍÍÍÍÍÍÍÍͼ 80 pin I/O and DC Power Connection ³ J1 /ÄÄÄijÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ\ TOP (HDA) ÍÍÍÍÍÍÍÍÍÍ/ ×××××××××××××××××××× \ÍÍÍÍÍÍÍÍÍÍ (\Ä1ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ40/) BOTTOM Notes on 80 pin I/O connector: pins 1 - 4 = +12v 41 - 44 = 12v GND 34 - 36 = +5v 74 - 76 = 5v GND 37 = SYNC 77 = LEDC 38 = MTRON 78 = DLYDST 39 = SCSIA0 79 = SCSIA1 40 = SCSIA2 80 = SCSIA3 Mating NC connector: AMP US p/n: 2-557103-1 straight-in, Male 80-pin 2-557101-1 right angle to PCB ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º RIGHT SIDE VIEW º (Both ST-15230N and ST-15230NC) ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ BACK Õ͸ J2 12345678 TOP (HDA) FRONT OF J1ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ OF DRIVE Ô; :::::::: BOTTOM DRIVE ³³³³³³³³ ³Terminator Power Ù³³³³³³À Enable T-Res Ú´Terminator Power ÄÙ³³³³ÀÄ Start Delay (12 secs * ID) ³ Reserved ÄÄÙ³³ÀÄÄ Motor Start ³ Parity Enable ÄÄÄÙÀÄÄÄ Write Protect ³ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÀÄ´ Termination Power-source Table ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ÍÍÍÍÍ....ÍÍÍÍÍ....ÍÍÍÍÍPWA edgeÍÍÍÍÍ ³ ³ ³ ³ 1 2 1 2 1 2 ³ ³ ÖÄ· ÖÄ· ÖÄÄÄ· A Drive Supplies Bus ³ ³ ºøºø øºøº ÓøÄø½ B Drive Supplies Own ³ ³ Óø½ø øÓø½ ø ø C Bus Supplies Drive ³ ³ A B C ³ ÀÄÄÄÄÄÄÄÄÄDefaultÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º LEFT SIDE VIEW º (ST-15230N only) ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ If these ID jumpers are used, then ID jumpers shown in front view ARE NOT USED. FRONT TOP (HDA) J5 ÕÍÍ1¸ Õ͸BACK OF ÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵:::Æ͵J1 OF DRIVE BOTTOM ÔÍÍ; Ô;DRIVE ³³³ ID 1 ÄÙ³ÀÄ ID 4 ID 2 ÉÍÍÍÍÍÍÍÍÍÍÍÍ» º FRONT VIEW º (Both ST-15230N and ST-15230NC) ÈÍÍÍÍÍÍÍÍÍÍÍͼ ÚÄÄ´Reserved. Shipped with cover installed. ³ ÀDo not remove. Do not install jumpers TOP (HDA) ÕØÍÍ͸ 1 ÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵::::³::::::ÆÍÍ * BOTTOM ÔÍÍÍ;123456 ³ J6 ³³³³³³ LED ÄÙ ³³³³³³ ID 4 Ù³³³³À Reserved ID 2 ÄÙ³³ÀÄ Remote LED (pin-3 +5v) ID 1 ÄÄÙÀÄÄ Spindle Synchronization (pin-6 REF SIG+, default If these ID jumper are used, then jumper installed) ID jumpers shown in left side view J5 or 80 pin I/O cable ARE NOT USED. ST-15230N Hawk 4 UNFORMATTED CAPACITY (MB) ________________5170 FORMATTED CAPACITY (xx SECTORS) (MB) _____4294 AVERAGE SECTORS PER TRACK ________________110 ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________75,848 CYLINDERS ________________________________3,992 user HEADS ______PHYSICAL______________________19 DISCS (3.5 in) ___________________________10 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec)________33.9 to 61.0 EXTERNAL TRANSFER RATE (mbyte/sec) _______5.2 Async EXTERNAL TRANSFER RATE (mbyte/sec) _______10 Sync SPINDLE SPEED (RPM) ______________________5,411 AVERAGE LATENCY (mSEC) ___________________5.54 BUFFER ___________________________________512/2048 KByte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 FAST ASA II SECTORS PER DRIVE ________________________ TPI (TRACKS PER INCH) ____________________4200 AVERAGE ACCESS (ms) (read/write)__________10.4/11.4 Includes controller overhead SINGLE TRACK SEEK (ms) ___________________2.1 MAX FULL SEEK (ms) _______________________20.6 MTBF (power-on hours) ____________________800,000 SHOCK (G's): operating (Read/Write) __________10 nonoperating ____________________60 ACOUSTICS (typ/max dBA) __________________ POWER REQUIREMENTS: +12V START-UP (amps) _2.4 +12V TYPICAL (amps) __0.54 +5V START-UP (amps) __0.61 +5V TYPICAL (amps) ___0.36 TYPICAL (watts) ______9 MAXIMUM (watts) ______11 LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Physical: Height (inches/mm): 1.62/41.1 Width (inches/mm): 4.00/101.6 Depth (inches/mm): 5.74/145.8 Weight (lbs/kg): 2.1/0.93 Already low-level formatted at the factory with twelve spare sectors per cylinder (all twelve spare sectors are on one track) and two spare cylinders/unit. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (10/24/94) SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1994 ST-15230W SCSI-2 Fast Wide (Hawk 4) ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º (ST-15230W/WD only) ÈÍÍÍÍÍÍÍÍÍÍͼ (TOP) Auxiliary ___________________ ÚÄÄ Ä1¿/ÍÍÍÍÍÍÍÍÍ\ Í( ×××××××××××××××××1)ͳ::::::³³ 0 0 0 0 ÆÍ \ÄÄÄÄÄÄÄÄÄÄÄijÄÄÄÄ/ À ÄÄ ÙÀÄ5ÄGÄGÄ12Ù 68 pin I/O CableÙ ³³³³³³ ³³³³³³ ³³³³³³ ³³³³³³ Auxiliary option header ³³³³³³ pin-11 +5v ÄÄÄÄÄÄÄÄÄÙ³³³³³ pin-10 GND ÄÄÄÄÄÄÄÄÄÄÙ³³³³ SCSI ID = 8 ÄÄÄÄÄÄÄÄÄÄÄÙ³³³ SCSI ID = 4 ÄÄÄÄÄÄÄÄÄÄÄÄ´³³ or pin-6 REFIND+ ÄÄÄÄÄÄÙ³³ SCSI ID = 2 ÄÄÄÄÄÄÄÄÄÄÄÄÄÙ³ SCSI ID = 1 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ SCSI ID = 0 (none) ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º (ST-15230WC only) ÈÍÍÍÍÍÍÍÍÍÍͼ 80 pin I/O and DC Power Wall/bracket Connection ³ Female J1 /ÄÄÄijÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ\ TOP (HDA) ÍÍÍÍÍÍÍÍÍÍ/ ×××××××××××××××××××× \ÍÍÍÍÍÍÍÍÍÍ (\Ä1ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ40/) BOTTOM Notes on 80 pin I/O connector: pins 1 - 4 = +12v 41 - 44 = 12v GND 34 - 36 = +5v 74 - 76 = 5v GND 37 = SYNC 77 = LEDC 38 = MTRON 78 = DLYDST 39 = SCSIA0 79 = SCSIA1 40 = SCSIA2 80 = SCSIA3 Mating NC connector: AMP US p/n: 2-557103-1 straight-in, Male 80-pin 2-557101-1 right angle to PCB ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º RIGHT SIDE VIEW º (Both ST-15230W and ST-15230WC) ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ BACK Õ͸ J2 12345678 TOP (HDA) FRONT OF J1ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ OF DRIVE Ô; :::::::: BOTTOM DRIVE ³³³³³³³³ ³Terminator Power Ù³³³³³³À Reserved Ú´Terminator Power ÄÙ³³³³ÀÄ Start Delay (12 secs * ID) ³ Enable T-Res ÄÄÙ³³ÀÄÄ Motor Start ³ Parity Enable ÄÄÄÙÀÄÄÄ Write Protect ³ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÀÄ´ Termination Power-source Table ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ÍÍÍÍÍ....ÍÍÍÍÍ....ÍÍÍÍÍPWA edgeÍÍÍÍÍ ³ ³ ³ ³ 1 2 1 2 1 2 ³ ³ ÖÄ· ÖÄ· ÖÄÄÄ· A Drive Supplies Bus ³ ³ ºøºø øºøº ÓøÄø½ B Drive Supplies Own ³ ³ Óø½ø øÓø½ ø ø C Bus Supplies Drive ³ ³ A B C ³ ÀÄÄÄÄÄÄÄÄÄDefaultÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Note: The model ST-15230WC drive cannot furnish terminator power, because no pins on the 80 pin I/O connector are devoted to terminator power. ÉÍÍÍÍÍÍÍÍÍÍÍÍ» º FRONT VIEW º (Both ST-15230W and ST-15230WC) ÈÍÍÍÍÍÍÍÍÍÍÍͼ TOP (HDA) J6 ÕÍÍÍÍÍ1¸ ÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵::::::ÆÍ * BOTTOM ÔÍÍÍÍÍ; ³ ³³³³³³ LED ÄÙ ³³³³³³ ³³³³³³ ³³³³³³ Auxiliary option header ³³³³³³ pin-11 +5v ÄÄÄÄÄÄÄÄÄÙ³³³³³ pin-10 GND ÄÄÄÄÄÄÄÄÄÄÙ³³³³ SCSI ID = 8 ÄÄÄÄÄÄÄÂÄÄÄÙ³³³ or pin-8 BUSY ÄÄÄÄÙ ³³³ SCSI ID = 4 ÄÄÄÄÄÄÄÂÄÄÄÄÙ³³ or pin-6 REFIND+ ÄÙ ³³ SCSI ID = 2 ÄÄÄÄÄÄÄÄÄÄÄÄÄÙ³ SCSI ID = 1 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ SCSI ID = 0 (none) If these ID jumper are used, then ID jumpers shown in left side view J5 or 80 pin I/O cable ARE NOT USED. ST-15230W Hawk 4 UNFORMATTED CAPACITY (MB) ________________5160 FORMATTED CAPACITY (xx SECTORS) (MB) _____4294 AVERAGE SECTORS PER TRACK ________________110 ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________75,848 CYLINDERS ________________________________3,992 user HEADS ______PHYSICAL______________________19 DISCS (3.5 in) ___________________________10 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec)________34 to 63 EXTERNAL TRANSFER RATE (mbyte/sec) _______20 Sync SPINDLE SPEED (RPM) ______________________5,411 AVERAGE LATENCY (mSEC) ___________________5.54 BUFFER ___________________________________512/2048 KByte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 FAST Wide ASA II SECTORS PER DRIVE ________________________ TPI (TRACKS PER INCH) ____________________3000 AVERAGE ACCESS (ms) (read/write)__________9.0/10.5 Drive level without controller overhead SINGLE TRACK SEEK (ms) ___________________1 MAX FULL SEEK (ms) _______________________22 MTBF (power-on hours) ____________________800,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.4 +12V TYPICAL (amps) __0.6 +5V START-UP (amps) __0.8 +5V TYPICAL (amps) ___0.43 TYPICAL (watts) ______9 MAXIMUM (watts) ______ WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Physical: Height (inches/mm): 1.63/41.4 Width (inches/mm): 4.00/101.6 Depth (inches/mm): 5.75/146.1 Weight (lbs/kg): 2.5/0.99 Already low-level formatted at the factory with twelve spare sectors per cylinder and two spare cylinders/unit. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (08/09/94) ST-31930N SCSI-2 Fast ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º (ST-31930N only) ÈÍÍÍÍÍÍÍÍÍÍͼ 50 pin I/O Cable Connection ³ J1ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ1¸ /ÄÄÄÄÄÄÄÄÄ\ TOP (HDA) ͵:::::::::::::::::::::::::Æͳ 0 0 0 0 ³ÍÍ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÀÄ5ÄGÄGÄ12Ù BOTTOM ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º (ST-31930NC only) ÈÍÍÍÍÍÍÍÍÍÍͼ 80 pin I/O and DC Power Wall/bracket Connection ³ J1 /ÄÄÄijÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ\ TOP (HDA) ÍÍÍÍÍÍÍÍÍÍ/ ×××××××××××××××××××× \ÍÍÍÍÍÍÍÍÍÍ (\Ä1ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ40/) BOTTOM Notes on 80 pin I/O connector: pins 1 - 4 = +12v 41 - 44 = 12v GND 34 - 36 = +5v 74 - 76 = 5v GND 37 = SYNC 77 = LEDC 38 = MTRON 78 = DLYDST 39 = SCSIA0 79 = SCSIA1 40 = SCSIA2 80 = SCSIA3 Mating NC connector: AMP US p/n: 2-557103-1 straight-in 2-557101-1 right angle to PCB ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º RIGHT SIDE VIEW º (Both ST-31930N and ST-31930NC) ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ BACK Õ͸ J2 12345678 TOP (HDA) FRONT OF J1ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ OF DRIVE Ô; :::::::: BOTTOM DRIVE ³³³³³³³³ ³Terminator Power Ù³³³³³³À Reserved Ú´Terminator Power ÄÙ³³³³ÀÄ Start Delay (12 secs * ID) ³ Enable T-Res ÄÄÙ³³ÀÄÄ Motor Start ³ Parity Enable ÄÄÄÙÀÄÄÄ Write Protect ³ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÀÄ´ Termination Power-source Table ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ÍÍÍÍÍ....ÍÍÍÍÍ....ÍÍÍÍÍPWA edgeÍÍÍÍÍ ³ ³ ³ ³ 1 2 1 2 1 2 ³ ³ ÖÄ· ÖÄ· A Drive Supplies Bus ³ ³ ºøºø øºøº ÖøÄø· B Drive Supplies Own ³ ³ Óø½ø øÓø½ Óø ø½ C Bus Supplies Drive ³ ³ A B C ³ ÀÄÄÄÄÄÄÄÄÄDefaultÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º LEFT SIDE VIEW º (ST-31930N only) ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ If these ID jumpers are used, then ID jumpers shown in front view ARE NOT USED. FRONT TOP (HDA) J5 ÕÍÍ1¸ Õ͸BACK OF ÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵:::Æ͵J1 OF DRIVE BOTTOM ÔÍÍ; Ô;DRIVE ³³³ ID 1 ÄÙ³ÀÄ ID 4 ID 2 ÉÍÍÍÍÍÍÍÍÍÍÍÍ» º FRONT VIEW º (Both ST-31930N and ST-31930NC) ÈÍÍÍÍÍÍÍÍÍÍÍͼ TOP (HDA) J6 ÕÍÍÍÍÍ1¸ ÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵::::::ÆÍ * BOTTOM ÔÍÍÍÍÍ; ³ 123456 LED ÄÙ ³³³³³³ ID 4 Ù³³³³À Reserved ID 2 ÄÙ³³ÀÄ Remote LED (pin-3 +5v) ID 1 ÄÄÙÀÄÄ Spindle Synchronization (pin-6 REF SIG+) If these ID jumper are used, then ID jumpers shown in left side view J5 or 80 pin I/O cable ARE NOT USED. ST-31930N UNFORMATTED CAPACITY (MB) ________________1900 FORMATTED CAPACITY (xx SECTORS) (MB) _____1700 AVERAGE SECTORS PER TRACK ________________ ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________ CYLINDERS ________________________________3898 HEADS ______PHYSICAL______________________7 DISCS (3.5 in) ___________________________4 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) TRANSFER RATE INTERNAL (mbits/sec)________38 to 62 TRANSFER RATE EXTERNAL (mbytes/sec)_______10 Sync. SPINDLE SPEED (RPM) ______________________5411 AVERAGE LATENCY (mSEC) ___________________5.54 BUFFER ___________________________________512 KByte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 FAST TPI (TRACKS PER INCH) ____________________ AVERAGE ACCESS (ms) (read/write)__________9.3/10.5 Drive level without controller overhead SINGLE TRACK SEEK (ms) (read/write)_______1.2/1.7 MAX FULL SEEK (ms) (read/write)___________19.4/20.4 MTBF (power-on hours) ____________________800,000 POWER REQUIREMENTS: +12V START-UP (amps) _1.7 +12V TYPICAL (amps) __0.36 +5V START-UP (amps) __ +5V TYPICAL (amps) ___0.54 TYPICAL (watts) ______7 MAXIMUM (watts) ______ WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Physical: Height (inches/mm): 1.00/25.4 Width (inches/mm): 4.02/102.1 Depth (inches/mm): 5.77/146.6 Weight (lbs/kg): 1.5/0.68 Already low-level formatted at the factory with 1 spare sector per track and 2 spare cylinders/unit. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (03/14/94) SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1993 ST-31200N SCSI-2 Fast (Hawk 1LP) ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º (ST-31200N only) ÈÍÍÍÍÍÍÍÍÍÍͼ 50 pin I/O Cable Connection ³ J1ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ1¸ /ÄÄÄÄÄÄÄÄÄ\ TOP (HDA) ͵:::::::::::::::::::::::::Æͳ 0 0 0 0 ³ÍÍ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÀÄ5ÄGÄGÄ12Ù BOTTOM ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º (ST-31200NC only) ÈÍÍÍÍÍÍÍÍÍÍͼ 80 pin I/O and DC Power Wall/bracket Connection ³ J1 /ÄÄÄijÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ\ TOP (HDA) ÍÍÍÍÍÍÍÍÍÍ/ ×××××××××××××××××××× \ÍÍÍÍÍÍÍÍÍÍ (\Ä1ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ40/) BOTTOM Notes on 80 pin I/O connector: pins 1 - 4 = +12v 41 - 44 = 12v GND 34 - 36 = +5v 74 - 76 = 5v GND 37 = SYNC 77 = LEDC 38 = MTRON 78 = DLYDST 39 = SCSIA0 79 = SCSIA1 40 = SCSIA2 80 = SCSIA3 Mating NC connector: AMP US p/n: 2-557103-1 straight-in 2-557101-1 right angle to PCB ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º RIGHT SIDE VIEW º (Both ST-31200N and ST-31200NC) ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ BACK Õ͸ J2 12345678 TOP (HDA) FRONT OF J1ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ OF DRIVE Ô; :::::::: BOTTOM DRIVE ³³³³³³³³ ³Terminator Power Ù³³³³³³À Reserved Ú´Terminator Power ÄÙ³³³³ÀÄ Start Delay (12 secs * ID) ³ Enable T-Res ÄÄÙ³³ÀÄÄ Motor Start ³ Parity Enable ÄÄÄÙÀÄÄÄ Write Protect ³ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÀÄ´ Termination Power-source Table ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ÍÍÍÍÍ....ÍÍÍÍÍ....ÍÍÍÍÍPWA edgeÍÍÍÍÍ ³ ³ ³ ³ 1 2 1 2 1 2 ³ ³ ÖÄ· ÖÄ· ÖÄÄÄ· A Drive Supplies Bus ³ ³ ºøºø øºøº ÓøÄø½ B Drive Supplies Own ³ ³ Óø½ø øÓø½ ø ø C Bus Supplies Drive ³ ³ A B C ³ ÀÄÄÄÄÄÄÄÄÄDefaultÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º LEFT SIDE VIEW º (ST-31200N only) ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ If these ID jumpers are used, then ID jumpers shown in front view ARE NOT USED. FRONT TOP (HDA) J5 ÕÍÍ1¸ Õ͸BACK OF ÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵:::Æ͵J1 OF DRIVE BOTTOM ÔÍÍ; Ô;DRIVE ³³³ ID 1 ÄÙ³ÀÄ ID 4 ID 2 ÉÍÍÍÍÍÍÍÍÍÍÍÍ» º FRONT VIEW º (Both ST-31200N and ST-31200NC) ÈÍÍÍÍÍÍÍÍÍÍÍͼ TOP (HDA) J6 ÕÍÍÍÍÍ1¸ ÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵::::::ÆÍ * BOTTOM ÔÍÍÍÍÍ; ³ 123456 LED ÄÙ ³³³³³³ ID 4 Ù³³³³À Reserved ID 2 ÄÙ³³ÀÄ Remote LED (pin-3 +5v) ID 1 ÄÄÙÀÄÄ Spindle Synchronization (pin-6 REF SIG+) If these ID jumper are used, then ID jumpers shown in left side view J5 or 80 pin I/O cable ARE NOT USED. ST-31200N Hawk 1LP UNFORMATTED CAPACITY (MB) ________________1258.8 FORMATTED CAPACITY (xx SECTORS) (MB) _____1052.4 AVERAGE SECTORS PER TRACK ________________84 ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________24,300 CYLINDERS ________________________________2,700 user HEADS ______PHYSICAL______________________9 DISCS (3.5 in) ___________________________5 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec)________26.8 to 47.2 EXTERNAL TRANSFER RATE (mbyte/sec) _______4 Async EXTERNAL TRANSFER RATE (mbyte/sec) _______10 Sync SPINDLE SPEED (RPM) ______________________5411 AVERAGE LATENCY (mSEC) ___________________5.54 BUFFER ___________________________________256/1024 KByte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 FAST ASA TPI (TRACKS PER INCH) ____________________3000 AVERAGE ACCESS (ms) (read/write)__________9.3/10.5 Drive level without controller overhead SINGLE TRACK SEEK (ms) (read/write)_______1.2/1.7 MAX FULL SEEK (ms) (read/write)___________19.4/20.4 MTBF (power-on hours) ____________________500,000 POWER REQUIREMENTS: +12V START-UP (amps) _1.5 +12V TYPICAL (amps) __0.5 +5V START-UP (amps) __ +5V TYPICAL (amps) ___0.2 TYPICAL (watts) ______7 MAXIMUM (watts) ______ WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Physical: Height (inches/mm): 1.00/25.4 Width (inches/mm): 4.02/102.1 Depth (inches/mm): 5.77/146.6 Weight (lbs/kg): 1.5/0.68 Already low-level formatted at the factory with 1 spare sector per track and 2 spare cylinders/unit. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (08/09/94) SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1993 ST-31200W/WD/WC Fast Wide SCSI-2 (Hawk 1LP) ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º (ST-31200W/WD only) ÈÍÍÍÍÍÍÍÍÍÍͼ (TOP) Auxiliary ___________________ ÚÄÄ Ä1¿/ÍÍÍÍÍÍÍÍÍ\ Í( ×××××××××××××××××1)ͳ::::::³³ 0 0 0 0 ÆÍ \ÄÄÄÄÄÄÄÄÄÄÄijÄÄÄÄ/ À ÄÄ ÙÀÄ5ÄGÄGÄ12Ù 68 pin I/O CableÙ ³³³³³³ ³³³³³³ ³³³³³³ ³³³³³³ Auxiliary option header ³³³³³³ pin-11 +5v ÄÄÄÄÄÄÄÄÄÙ³³³³³ pin-10 GND ÄÄÄÄÄÄÄÄÄÄÙ³³³³ SCSI ID = 8 ÄÄÄÄÄÄÄÄÄÄÄÙ³³³ SCSI ID = 4 ÄÄÄÄÄÄÄÄÄÄÄÄ´³³ or pin-6 REFIND+ ÄÄÄÄÄÄÙ³³ SCSI ID = 2 ÄÄÄÄÄÄÄÄÄÄÄÄÄÙ³ SCSI ID = 1 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ SCSI ID = 0 (none) ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º (ST-31200WC only) ÈÍÍÍÍÍÍÍÍÍÍͼ 80 pin I/O and DC Power Wall/bracket Connection ³ Female J1 /ÄÄÄijÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ\ TOP (HDA) ÍÍÍÍÍÍÍÍÍÍ/ ×××××××××××××××××××× \ÍÍÍÍÍÍÍÍÍÍ (\Ä1ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ40/) BOTTOM Notes on 80 pin I/O connector: pins 1 - 4 = +12v 41 - 44 = 12v GND 34 - 36 = +5v 74 - 76 = 5v GND 37 = SYNC 77 = LEDC 38 = MTRON 78 = DLYDST 39 = SCSIA0 79 = SCSIA1 40 = SCSIA2 80 = SCSIA3 Mating NC connector: AMP US p/n: 2-557103-1 straight-in, Male 80-pin 2-557101-1 right angle to PCB ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º RIGHT SIDE VIEW º (Both ST-31200W and ST-31200WC) ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ BACK Õ͸ J2 12345678 TOP (HDA) FRONT OF J1ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ OF DRIVE Ô; :::::::: BOTTOM DRIVE ³³³³³³³³ ³Terminator Power Ù³³³³³³À Reserved Ú´Terminator Power ÄÙ³³³³ÀÄ Start Delay (12 secs * ID) ³ Enable T-Res ÄÄÙ³³ÀÄÄ Motor Start ³ Parity Enable ÄÄÄÙÀÄÄÄ Write Protect ³ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÀÄ´ Termination Power-source Table ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ÍÍÍÍÍ....ÍÍÍÍÍ....ÍÍÍÍÍPWA edgeÍÍÍÍÍ ³ ³ ³ ³ 1 2 1 2 1 2 ³ ³ ÖÄ· ÖÄ· ÖÄÄÄ· A Drive Supplies Bus ³ ³ ºøºø øºøº ÓøÄø½ B Drive Supplies Own ³ ³ Óø½ø øÓø½ ø ø C Bus Supplies Drive ³ ³ A B C ³ ÀÄÄÄÄÄÄÄÄÄDefaultÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Note: The model ST-31200WC drive cannot furnish terminator power, because no pins on the 80 pin I/O connector are devoted to terminator power. ÉÍÍÍÍÍÍÍÍÍÍÍÍ» º FRONT VIEW º (Both ST-31200W and ST-31200WC) ÈÍÍÍÍÍÍÍÍÍÍÍͼ TOP (HDA) J6 ÕÍÍÍÍÍ1¸ ÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵::::::ÆÍ * BOTTOM ÔÍÍÍÍÍ; ³ ³³³³³³ LED ÄÙ ³³³³³³ ³³³³³³ ³³³³³³ Auxiliary option header ³³³³³³ pin-11 +5v ÄÄÄÄÄÄÄÄÄÙ³³³³³ pin-10 GND ÄÄÄÄÄÄÄÄÄÄÙ³³³³ SCSI ID = 8 ÄÄÄÄÄÄÄÂÄÄÄÙ³³³ or pin-8 BUSY ÄÄÄÄÙ ³³³ SCSI ID = 4 ÄÄÄÄÄÄÄÂÄÄÄÄÙ³³ or pin-6 REFIND+ ÄÙ ³³ SCSI ID = 2 ÄÄÄÄÄÄÄÄÄÄÄÄÄÙ³ SCSI ID = 1 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ SCSI ID = 0 (none) If these ID jumper are used, then ID jumpers shown in left side view J5 or 80 pin I/O cable ARE NOT USED. ST-31200W Hawk 1LP UNFORMATTED CAPACITY (MB) ________________1258.8 FORMATTED CAPACITY (xx SECTORS) (MB) _____1055.28 AVERAGE SECTORS PER TRACK ________________84 ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________24,300 CYLINDERS ________________________________2,700 user HEADS ______PHYSICAL______________________9 DISCS (3.5 in) ___________________________5 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec)________26.8 to 47.2 EXTERNAL TRANSFER RATE (mbyte/sec) _______20 Sync SPINDLE SPEED (RPM) ______________________5411 AVERAGE LATENCY (mSEC) ___________________5.54 BUFFER ___________________________________256/1024 KByte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 FAST WIDE ASA TPI (TRACKS PER INCH) ____________________3000 AVERAGE ACCESS (ms) (read/write)__________9.3/10.5 Drive level without controller overhead SINGLE TRACK SEEK (ms) (read/write)_______1.2/1.7 MAX FULL SEEK (ms) (read/write)___________19.4/20.4 MTBF (power-on hours) ____________________500,000 POWER REQUIREMENTS: +12V START-UP (amps) _1.9 +12V TYPICAL (amps) __0.37 +5V START-UP (amps) __0.65 +5V TYPICAL (amps) ___0.45 TYPICAL (watts) ______7 MAXIMUM (watts) ______ WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Physical: Height (inches/mm): 1.00/25.4 Width (inches/mm): 4.02/102.1 Depth (inches/mm): 5.77/146.6 Weight (lbs/kg): 1.5/0.68 Already low-level formatted at the factory with 9 spare sector per cylinder and 2 spare cylinders/unit. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (10/24/94) SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1993 ST-31230N SCSI-2 Fast (Hawk 2LP) ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º (ST-31230N only) ÈÍÍÍÍÍÍÍÍÍÍͼ 50 pin I/O Cable Connection ³ J1ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ1¸ /ÄÄÄÄÄÄÄÄÄ\ TOP (HDA) ͵:::::::::::::::::::::::::Æͳ 0 0 0 0 ³ÍÍ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÀÄ5ÄGÄGÄ12Ù BOTTOM ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º RIGHT SIDE VIEW º (ST-31230N) ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ BACK Õ͸ J2 12345678 TOP (HDA) FRONT OF J1ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ OF DRIVE Ô; :::::::: BOTTOM DRIVE ³³³³³³³³ ³Terminator Power Ù³³³³³³À Enable T-Res Ú´Terminator Power ÄÙ³³³³ÀÄ Start Delay (12 secs * ID) ³ Reserved ÄÄÙ³³ÀÄÄ Motor Start ³ Parity Enable ÄÄÄÙÀÄÄÄ Write Protect ³ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÀÄ´ Termination Power-source Table ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ÍÍÍÍÍ....ÍÍÍÍÍ....ÍÍÍÍÍPWA edgeÍÍÍÍÍ ³ ³ ³ ³ 1 2 1 2 1 2 ³ ³ ÖÄ· ÖÄ· ÖÄÄÄ· A Drive Supplies Bus ³ ³ ºøºø øºøº ÓøÄø½ B Drive Supplies Own ³ ³ Óø½ø øÓø½ ø ø C Bus Supplies Drive ³ ³ A B C ³ ÀÄÄÄÄÄÄÄÄÄDefaultÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º LEFT SIDE VIEW º (ST-31230N) ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ If these ID jumpers are used, then ID jumpers shown in front view ARE NOT USED. FRONT TOP (HDA) J5 ÕÍÍ1¸ Õ͸BACK OF ÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵:::Æ͵J1 OF DRIVE BOTTOM ÔÍÍ; Ô;DRIVE ³³³ ID 1 ÄÙ³ÀÄ ID 4 ID 2 ÉÍÍÍÍÍÍÍÍÍÍÍÍ» º FRONT VIEW º (ST-31230N) ÈÍÍÍÍÍÍÍÍÍÍÍͼ ÚÄÄ´Reserved. Shipped with cover installed. ³ ÀDo not remove. Do not install jumpers TOP (HDA) ÕØÍÍ͸ 1 ÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵::::³::::::ÆÍÍ * BOTTOM ÔÍÍÍ;123456 ³ J6 ³³³³³³ LED ÄÙ ³³³³³³ ID 4 Ù³³³³À Reserved ID 2 ÄÙ³³ÀÄ Remote LED (pin-3 +5v) ID 1 ÄÄÙÀÄÄ Reserved If these ID jumper are used, then ID jumpers shown in left side view J5 ARE NOT USED. ST-31230N Hawk 2LP UNFORMATTED CAPACITY (MB) ________________1280 FORMATTED CAPACITY (xx SECTORS) (MB) _____1060 AVERAGE SECTORS PER TRACK ________________103 ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________19,960 CYLINDERS ________________________________3992 HEADS ______PHYSICAL______________________5 DISCS (3.5 in) ___________________________3 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec)________33.9 to 56.7 EXTERNAL TRANSFER RATE (mbyte/sec) _______5.2 Async EXTERNAL TRANSFER RATE (mbyte/sec) _______10 Sync SPINDLE SPEED (RPM) ______________________5411 AVERAGE LATENCY (mSEC) ___________________5.54 BUFFER ___________________________________512 KByte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 FAST ASA II TPI (TRACKS PER INCH) ____________________4200 AVERAGE ACCESS (ms) (read/write)__________10.4/11.4 Including controller overhead SINGLE TRACK SEEK (ms) (read/write)_______2.1/2.5 MAX FULL SEEK (ms) (read/write)___________20.4/21.4 MTBF (power-on hours) ____________________800,000 SHOCK (G's): operating (Read/Write) __________10 nonoperating ____________________75 ACOUSTICS (typ/max dBA) __________________ POWER REQUIREMENTS: +12V START-UP (amps) _2.0 +12V TYPICAL (amps) __0.35 +5V START-UP (amps) __0.61 +5V TYPICAL (amps) ___0.35 TYPICAL (watts) ______6 MAXIMUM (watts) ______9 LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Physical: Height (inches/mm): 1.00/25.4 Width (inches/mm): 4.02/101.6 Depth (inches/mm): 5.74/145.8 Weight (lbs/kg): 1.5/0.68 Already low-level formatted at the factory with 1 spare sector per head (all spare sectors are on one track) and 2 spare cylinders per unit. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (08/26/94) SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1993 ST-31230W/WD/WC Fast Wide SCSI-2 (Hawk 2LP) ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º (ST-31230W/WD only) ÈÍÍÍÍÍÍÍÍÍÍͼ (TOP) Auxiliary ___________________ ÚÄÄ Ä1¿/ÍÍÍÍÍÍÍÍÍ\ Í( ×××××××××××××××××1)ͳ::::::³³ 0 0 0 0 ÆÍ \ÄÄÄÄÄÄÄÄÄÄÄijÄÄÄÄ/ À ÄÄ ÙÀÄ5ÄGÄGÄ12Ù 68 pin I/O CableÙ ³³³³³³ Connection Male ³³³³³³ ³³³³³³ ³³³³³³ Auxiliary option header ³³³³³³ pin-11 +5v ÄÄÄÄÄÄÄÄÄÙ³³³³³ pin-10 GND ÄÄÄÄÄÄÄÄÄÄÙ³³³³ SCSI ID = 8 ÄÄÄÄÄÄÄÄÄÄÄÙ³³³ SCSI ID = 4 ÄÄÄÄÄÄÄÄÄÄÄÄ´³³ or pin-6 REFIND+ ÄÄÄÄÄÄÙ³³ SCSI ID = 2 ÄÄÄÄÄÄÄÄÄÄÄÄÄÙ³ SCSI ID = 1 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ SCSI ID = 0 (none) ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º (ST-31230WC only) ÈÍÍÍÍÍÍÍÍÍÍͼ 80 pin I/O and DC Power Wall/bracket Connection ³ Female J1 /ÄÄÄijÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ\ TOP (HDA) ÍÍÍÍÍÍÍÍÍÍ/ ×××××××××××××××××××× \ÍÍÍÍÍÍÍÍÍÍ (\Ä1ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ40/) BOTTOM Notes on 80 pin I/O connector: pins 1 - 4 = +12v 41 - 44 = 12v GND 34 - 36 = +5v 74 - 76 = 5v GND 37 = SYNC 77 = LEDC 38 = MTRON 78 = DLYDST 39 = SCSIA0 79 = SCSIA1 40 = SCSIA2 80 = SCSIA3 Mating NC connector: AMP US p/n: 2-557103-1 straight-in, Male 80-pin 2-557101-1 right angle to PCB ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º RIGHT SIDE VIEW º (Both ST-31230W and ST-31230WC) ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ BACK Õ͸ J2 12345678 TOP (HDA) FRONT OF J1ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ OF DRIVE Ô; :::::::: BOTTOM DRIVE ³³³³³³³³ ³Terminator Power Ù³³³³³³À Reserved Ú´Terminator Power ÄÙ³³³³ÀÄ Start Delay (12 secs * ID) ³ Enable T-Res ÄÄÙ³³ÀÄÄ Motor Start ³ Parity Enable ÄÄÄÙÀÄÄÄ Write Protect ³ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÀÄ´ Termination Power-source Table ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ÍÍÍÍÍ....ÍÍÍÍÍ....ÍÍÍÍÍPWA edgeÍÍÍÍÍ ³ ³ ³ ³ 1 2 1 2 1 2 ³ ³ ÖÄ· ÖÄ· ÖÄÄÄ· A Drive Supplies Bus ³ ³ ºøºø øºøº ÓøÄø½ B Drive Supplies Own ³ ³ Óø½ø øÓø½ ø ø C Bus Supplies Drive ³ ³ A B C ³ ÀÄÄÄÄÄÄÄÄÄDefaultÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Note: The model ST-31230WC drive cannot furnish terminator power, because no pins on the 80 pin I/O connector are devoted to terminator power. ÉÍÍÍÍÍÍÍÍÍÍÍÍ» º FRONT VIEW º (Both ST-31230W and ST-31230WC) ÈÍÍÍÍÍÍÍÍÍÍÍͼ TOP (HDA) J6 ÕÍÍÍÍÍ1¸ ÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵::::::ÆÍ * BOTTOM ÔÍÍÍÍÍ; ³ ³³³³³³ LED ÄÙ ³³³³³³ ³³³³³³ ³³³³³³ Auxiliary option header ³³³³³³ pin-11 +5v ÄÄÄÄÄÄÄÄÄÙ³³³³³ pin-10 GND ÄÄÄÄÄÄÄÄÄÄÙ³³³³ SCSI ID = 8 ÄÄÄÄÄÄÄÂÄÄÄÙ³³³ or pin-8 BUSY ÄÄÄÄÙ ³³³ SCSI ID = 4 ÄÄÄÄÄÄÄÂÄÄÄÄÙ³³ or pin-6 REFIND+ ÄÙ ³³ SCSI ID = 2 ÄÄÄÄÄÄÄÄÄÄÄÄÄÙ³ SCSI ID = 1 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ SCSI ID = 0 (none) If these ID jumper are used, then ID jumpers shown in left side view J5 or 80 pin I/O cable ARE NOT USED. ST-31230W Hawk 2LP UNFORMATTED CAPACITY (GB) ________________1.28 FORMATTED CAPACITY (xx SECTORS) (GB) _____1.06 AVERAGE SECTORS PER TRACK ________________103 ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________19,960 CYLINDERS ________________________________3992 HEADS ______PHYSICAL______________________5 DISCS (3.5 in) ___________________________3 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec)________33.9 to 56.7 EXTERNAL TRANSFER RATE (mbytes/sec)_______20 Sync. SPINDLE SPEED (RPM) ______________________5411 AVERAGE LATENCY (mSEC) ___________________5.54 BUFFER ___________________________________512 KByte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 FAST Wide ASA II TPI (TRACKS PER INCH) ____________________4200 AVERAGE ACCESS (ms) (read/write)__________10.4/11.4 Drive level with controller overhead SINGLE TRACK SEEK (ms) (read/write)_______2.1/2.5 MAX FULL SEEK (ms) (read/write)___________20.4/21.4 MTBF (power-on hours) ____________________800,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.0 +12V TYPICAL (amps) __0.35 +5V START-UP (amps) __0.61 +5V TYPICAL (amps) ___0.36 TYPICAL (watts) ______ MAXIMUM (watts) ______ WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Physical: Height (inches/mm): 1.00/25.4 Width (inches/mm): 4.02/102.1 Depth (inches/mm): 5.77/146.6 Weight (lbs/kg): 1.5/0.68 Already low-level formatted at the factory with 1 spare sector per track and 2 spare cylinders/unit. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (10/24/94) SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1994 ST-31250N SCSI-2 Fast (Barracuda 2LP) ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º (ST-31250N/ND) ÈÍÍÍÍÍÍÍÍÍÍͼ 50 pin I/O Cable Connection ³ ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ1¸ /ÄÄÄÄÄÄÄÄÄ\ TOP (HDA) ͵:::::::::::::::::::::::::Æͳ 0 0 0 0 ³ÍÍ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÀÄ5ÄGÄGÄ12Ù BOTTOM (o o) - These pins not on differential ÚÄÄÄÄÄÄ o o model ND ³ o o ³ 2 1 ³ ÚÄ J1 Terminator options ÄÁÄ (single-ended) ÄÄÄÄÄÄÄÄÄÄÄ¿ ³ o o (o o) o o o o ÕoÍo¸ ³ ³ o o oÕo¸ Õo¸o ÕoÑo¸ o o ³ ³ ÕoÍo¸ o³o³ ³o³o ³o³o³ o o ³ ³ 2ÍÍÍ1 2 ÔÍ1 2; 1 2ÍÏÍ1 2 1 ³ ³ A B C D E ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ A - Term. power from drive (default) B - Term. power to SCSI bus (only option available for differential ND) C - Term. power from SCSI bus D - Term. power to SCSI bus and drive E - Enable SCSI terminator (jumper on pins 5-6) ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º RIGHT SIDE VIEW º (ST-31250N) ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ BACK Õ͸ J2 123456789 TOP (HDA) FRONT OF I/OÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ OF DRIVE Ô; ::::::::: BOTTOM DRIVE ³³³³³³³³³ 1-2 Reserved ÄÄÁÙ³³³³ÀÁÁÄÄ Reserved 7-9 3 Parity Disable ÄÄÄÄÙ³³ÀÄÄÄÄÄ Delay Motor Start 6 4 Write Protect ÄÄÄÄÄÙÀÄÄÄÄÄÄ Motor Start Enable 5 ÉÍÍÍÍÍÍÍÍÍÍÍÍ» º FRONT VIEW º (ST-31250N) ÈÍÍÍÍÍÍÍÍÍÍÍͼ J4 TOP (HDA) 1 ÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵::::::::::ÆÍÍ BOTTOM ³³³³³³³³³³ ³³³³³³³³³³ Reserved ÄÁÁÁÙ³³³³³ÀÄ Reserved ID 4 ÄÄÄÄÄÙ³³³ÀÄÄ Remote LED (pin-3 +5v) ID 2 ÄÄÄÄÄÄÙ³ÀÄÄÄ Spindle Synchronization ID 1 ÄÄÄÄÄÄÄÙ (pin-6 REF SIG+, default jumper installed) ST-31250N Barracuda 2LP UNFORMATTED CAPACITY (MB) ________________1205.3 FORMATTED CAPACITY (xx SECTORS) (MB) _____1020.9 AVERAGE SECTORS PER TRACK ________________107 rounded down ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________18,555 CYLINDERS ________________________________3,711 user HEADS ______PHYSICAL______________________5 DISCS (3.5 in) ___________________________3 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec)________47.5 to 72.0 EXTERNAL TRANSFER RATE (mbyte/sec) _______5 Async EXTERNAL TRANSFER RATE (mbyte/sec) _______2.5 to 10 Sync SPINDLE SPEED (RPM) ______________________7,200 AVERAGE LATENCY (mSEC) ___________________4.17 BUFFER ___________________________________512 KByte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 FAST ASA II BYTES PER TRACK __________________________64,160 average SECTORS PER DRIVE ________________________ TPI (TRACKS PER INCH) ____________________4,048 BPI (BITS PER INCH) ______________________73,820 AVERAGE ACCESS (ms) (read/write)__________8.0/9.0 Drive level without controller overhead SINGLE TRACK SEEK (ms) ___________________0.6/0.9 MAX FULL SEEK (ms) _______________________17/19 MTBF (power-on hours) ____________________800,000 SHOCK (G's): operating (Read/Write) __________2 nonoperating ____________________50 ACOUSTICS (typ/max dBA) __________________4.7/ POWER REQUIREMENTS: +12V START-UP (amps) _1.26 +12V TYPICAL (amps) __0.88 idle +5V START-UP (amps) __0.91 +5V TYPICAL (amps) ___0.33 idle IDLE (watts) _________ LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Physical: Height (inches/mm): 1.00/25.4 Width (inches/mm): 4.00/101.6 Depth (inches/mm): 5.75/146.05 Weight (lbs/g): 1.2/545 Already low-level formatted at the factory with 9 spare sectors per cylinder and 1 spare cylinder per unit. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (08/25/94)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1994 ST-31250W/WC SCSI-2 Fast Wide (Barracuda 2LP) ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º (ST-31250W only) ÈÍÍÍÍÍÍÍÍÍÍͼ ÚÄÄÄÄÄ ID 8 ³ÚÄÄÄÄ ID 4 ³³ÚÄÄÄ ID 2 ³³³ÚÄÄ ID 1 (TOP) J5 ³³³³ ___________________ ÚÄÄ Ä1¿/ÍÍÍÍÍÍÍÍÍ\ Í( ×××××××××××××××××1)ͳ::::::³³ 0 0 0 0 ÆÍ \ÄÄÄÄÄÄÄÄÄÄÄijÄÄÄÄ/ À ÄÄ ÙÀÄ5ÄGÄGÄ12Ù 68 pin I/O CableÙ ³³ Connection ³³ (o o) - These pins not on ³³ o o differential model WD Spindle Synch Cable Connector ÄÄÙ³ o o (pin-11 SSREF, pin-12 ground) ³ 2 1 Remote LED Connector ÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ [pin-9 cathode (neg), ³ pin-10 anode (pos)] ³ ³ ³ ÚÄ J1 Terminator options ÄÁÄ (single-ended) ÄÄÄÄÄÄÄÄÄÄÄ¿ ³ o o (o o) o o o o ÕoÍo¸ ³ ³ o o oÕo¸ Õo¸o ÕoÑo¸ o o ³ ³ ÕoÍo¸ o³o³ ³o³o ³o³o³ o o ³ ³ 2ÍÍÍ1 2 ÔÍ1 2; 1 2ÍÏÍ1 2 1 ³ ³ A B C D E ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ A - Term. power from drive (default) B - Term. power to SCSI bus (only option available for differential WD) C - Term. power from SCSI bus D - Term. power to SCSI bus and drive E - Enable SCSI terminator (jumper on pins 5-6) ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º (ST-31250WC only) ÈÍÍÍÍÍÍÍÍÍÍͼ 80 pin I/O and DC Power Wall/bracket Connection ³ Female J1 /ÄÄÄijÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ\ TOP (HDA) ÍÍÍÍÍÍÍÍÍÍ/ ×××××××××××××××××××× \ÍÍÍÍÍÍÍÍÍÍ (\Ä1ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ40/) BOTTOM Notes on 80 pin I/O connector: pins 1 - 4 = +12v 41 - 44 = 12v GND 34 - 36 = +5v 74 - 76 = 5v GND 37 = SYNC 77 = LEDC 38 = MTRON 78 = DLYDST 39 = SCSIA0 79 = SCSIA1 40 = SCSIA2 80 = SCSIA3 Mating WC connector: AMP US p/n: 2-557103-1 straight-in, Male 80-pin 2-557101-1 right angle to PCB ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º RIGHT SIDE VIEW º (ST-31250W/WC) ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ BACK Õ͸ J2 123456789 TOP (HDA) FRONT OF I/OÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ OF DRIVE Ô; ::::::::: BOTTOM DRIVE ³³³³³³³³³ 1-2 Reserved ÄÄÁÙ³³³³ÀÁÁÄÄ Reserved 7-9 3 Parity Disable ÄÄÄÄÙ³³ÀÄÄÄÄÄ Delay Motor Start 6 4 Write Protect ÄÄÄÄÄÙÀÄÄÄÄÄÄ Motor Start Enable 5 ÉÍÍÍÍÍÍÍÍÍÍÍÍ» º FRONT VIEW º (ST-31250W/WC) ÚÄÄÄÄÄÄÄ +5V ÈÍÍÍÍÍÍÍÍÍÍÍͼ ³ÚÄÄÄÄÄÄ Enable SCSI terminator ³³ÚÄÄÄÄÄ ID 8 ³³³ÚÄÄÄÄ ID 4 ³³³³ÚÄÄÄ ID 2 ³³³³³ÚÄÄ ID 1 (J4 top row) TOP (HDA) ³³³³³³1 ÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵::::::::::ÆÍÍ J4 BOTTOM ³³³³³³³³³³ ³³³³³³³³³³ (J4 bottom row) Reserved ÄÁÁÁÙ³³³³³³ No connection ÄÄÄÄÄÙ³³³³³ Ground ÄÄÄÄÄÄÙ³³³³ Unit Active LED pin (+) ÄÄÄÄÄÄÄÙ³³³ SSREF (+) spindle sync ÄÄÄÄÄÄÄÄÙ³³ Vendor Unique ÄÄÄÄÄÄÄÄÄÙ³ Fault LED pin (+) ÄÄÄÄÄÄÄÄÄÄÙ ST-31250W Barracuda 2LP UNFORMATTED CAPACITY (MB) ________________1205.3 FORMATTED CAPACITY (xx SECTORS) (MB) _____1020.9 AVERAGE SECTORS PER TRACK ________________107 rounded down ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________18,555 CYLINDERS ________________________________3,711 user HEADS ______PHYSICAL______________________5 DISCS (3.5 in) ___________________________3 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec)________47.5 to 72.0 EXTERNAL TRANSFER RATE (mbyte/sec) _______5 Async EXTERNAL TRANSFER RATE (mbyte/sec) _______5.0 to 20 Sync SPINDLE SPEED (RPM) ______________________7,200 AVERAGE LATENCY (mSEC) ___________________4.17 BUFFER ___________________________________512 KByte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 FAST Wide ASA II BYTES PER TRACK __________________________64,160 average SECTORS PER DRIVE ________________________ TPI (TRACKS PER INCH) ____________________4,048 BPI (BITS PER INCH) ______________________73,820 AVERAGE ACCESS (ms) (read/write)__________8.0/9.0 Drive level without controller overhead SINGLE TRACK SEEK (ms) ___________________0.6/0.9 MAX FULL SEEK (ms) _______________________17/19 MTBF (power-on hours) ____________________800,000 SHOCK (G's): operating (Read/Write) __________2 nonoperating ____________________50 ACOUSTICS (typ/max dBA) __________________4.7/ POWER REQUIREMENTS: +12V START-UP (amps) _1.26 +12V TYPICAL (amps) __0.88 idle +5V START-UP (amps) __0.91 +5V TYPICAL (amps) ___0.33 idle IDLE (watts) _________ LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Physical: Height (inches/mm): 1.00/25.4 Width (inches/mm): 4.00/101.6 Depth (inches/mm): 5.75/146.05 Weight (lbs/g): 1.2/545 Already low-level formatted at the factory with 9 spare sectors per cylinder and 1 spare cylinder per unit. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (08/25/94)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1993 ST-31930N SCSI-2 Fast ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º (ST-31930N only) ÈÍÍÍÍÍÍÍÍÍÍͼ 50 pin I/O Cable Connection ³ J1ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ1¸ /ÄÄÄÄÄÄÄÄÄ\ TOP (HDA) ͵:::::::::::::::::::::::::Æͳ 0 0 0 0 ³ÍÍ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÀÄ5ÄGÄGÄ12Ù BOTTOM ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º (ST-31930NC only) ÈÍÍÍÍÍÍÍÍÍÍͼ 80 pin I/O and DC Power Wall/bracket Connection ³ J1 /ÄÄÄijÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ\ TOP (HDA) ÍÍÍÍÍÍÍÍÍÍ/ ×××××××××××××××××××× \ÍÍÍÍÍÍÍÍÍÍ (\Ä1ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ40/) BOTTOM Notes on 80 pin I/O connector: pins 1 - 4 = +12v 41 - 44 = 12v GND 34 - 36 = +5v 74 - 76 = 5v GND 37 = SYNC 77 = LEDC 38 = MTRON 78 = DLYDST 39 = SCSIA0 79 = SCSIA1 40 = SCSIA2 80 = SCSIA3 Mating NC connector: AMP US p/n: 2-557103-1 straight-in 2-557101-1 right angle to PCB ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º RIGHT SIDE VIEW º (Both ST-31930N and ST-31930NC) ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ BACK Õ͸ J2 12345678 TOP (HDA) FRONT OF J1ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ OF DRIVE Ô; :::::::: BOTTOM DRIVE ³³³³³³³³ ³Terminator Power Ù³³³³³³À Reserved Ú´Terminator Power ÄÙ³³³³ÀÄ Start Delay (12 secs * ID) ³ Enable T-Res ÄÄÙ³³ÀÄÄ Motor Start ³ Parity Enable ÄÄÄÙÀÄÄÄ Write Protect ³ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÀÄ´ Termination Power-source Table ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ÍÍÍÍÍ....ÍÍÍÍÍ....ÍÍÍÍÍPWA edgeÍÍÍÍÍ ³ ³ ³ ³ 1 2 1 2 1 2 ³ ³ ÖÄ· ÖÄ· A Drive Supplies Bus ³ ³ ºøºø øºøº ÖøÄø· B Drive Supplies Own ³ ³ Óø½ø øÓø½ Óø ø½ C Bus Supplies Drive ³ ³ A B C ³ ÀÄÄÄÄÄÄÄÄÄDefaultÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º LEFT SIDE VIEW º (ST-31930N only) ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ If these ID jumpers are used, then ID jumpers shown in front view ARE NOT USED. FRONT TOP (HDA) J5 ÕÍÍ1¸ Õ͸BACK OF ÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵:::Æ͵J1 OF DRIVE BOTTOM ÔÍÍ; Ô;DRIVE ³³³ ID 1 ÄÙ³ÀÄ ID 4 ID 2 ÉÍÍÍÍÍÍÍÍÍÍÍÍ» º FRONT VIEW º (Both ST-31930N and ST-31930NC) ÈÍÍÍÍÍÍÍÍÍÍÍͼ TOP (HDA) J6 ÕÍÍÍÍÍ1¸ ÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵::::::ÆÍ * BOTTOM ÔÍÍÍÍÍ; ³ 123456 LED ÄÙ ³³³³³³ ID 4 Ù³³³³À Reserved ID 2 ÄÙ³³ÀÄ Remote LED (pin-3 +5v) ID 1 ÄÄÙÀÄÄ Spindle Synchronization (pin-6 REF SIG+) If these ID jumper are used, then ID jumpers shown in left side view J5 or 80 pin I/O cable ARE NOT USED. ST-31930N UNFORMATTED CAPACITY (MB) ________________1900 FORMATTED CAPACITY (xx SECTORS) (MB) _____1700 AVERAGE SECTORS PER TRACK ________________ ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________ CYLINDERS ________________________________3898 HEADS ______PHYSICAL______________________7 DISCS (3.5 in) ___________________________4 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec)________38 to 62 EXTERNAL TRANSFER RATE (mbytes/sec)_______10 Sync. SPINDLE SPEED (RPM) ______________________5411 AVERAGE LATENCY (mSEC) ___________________5.54 BUFFER ___________________________________512 KByte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 FAST TPI (TRACKS PER INCH) ____________________ AVERAGE ACCESS (ms) (read/write)__________9.3/10.5 Drive level without controller overhead SINGLE TRACK SEEK (ms) (read/write)_______1.2/1.7 MAX FULL SEEK (ms) (read/write)___________19.4/20.4 MTBF (power-on hours) ____________________800,000 POWER REQUIREMENTS: +12V START-UP (amps) _1.7 +12V TYPICAL (amps) __0.36 +5V START-UP (amps) __ +5V TYPICAL (amps) ___0.54 TYPICAL (watts) ______7 MAXIMUM (watts) ______ WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Physical: Height (inches/mm): 1.00/25.4 Width (inches/mm): 4.02/102.1 Depth (inches/mm): 5.77/146.6 Weight (lbs/kg): 1.5/0.68 Already low-level formatted at the factory with 1 spare sector per track and 2 spare cylinders/unit. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (08/08/94) SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1993 ST-32430N SCSI-2 Fast (Hawk 2LP) ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º (ST-32430N only) ÈÍÍÍÍÍÍÍÍÍÍͼ 50 pin I/O Cable Connection ³ J1ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ1¸ /ÄÄÄÄÄÄÄÄÄ\ TOP (HDA) ͵:::::::::::::::::::::::::Æͳ 0 0 0 0 ³ÍÍ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÀÄ5ÄGÄGÄ12Ù BOTTOM ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º RIGHT SIDE VIEW º (ST-32430N) ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ BACK Õ͸ J2 12345678 TOP (HDA) FRONT OF J1ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ OF DRIVE Ô; :::::::: BOTTOM DRIVE ³³³³³³³³ ³Terminator Power Ù³³³³³³À Enable T-Res Ú´Terminator Power ÄÙ³³³³ÀÄ Start Delay (12 secs * ID) ³ Reserved ÄÄÙ³³ÀÄÄ Motor Start ³ Parity Enable ÄÄÄÙÀÄÄÄ Write Protect ³ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÀÄ´ Termination Power-source Table ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ÍÍÍÍÍ....ÍÍÍÍÍ....ÍÍÍÍÍPWA edgeÍÍÍÍÍ ³ ³ ³ ³ 1 2 1 2 1 2 ³ ³ ÖÄ· ÖÄ· ÖÄÄÄ· A Drive Supplies Bus ³ ³ ºøºø øºøº ÓøÄø½ B Drive Supplies Own ³ ³ Óø½ø øÓø½ ø ø C Bus Supplies Drive ³ ³ A B C ³ ÀÄÄÄÄÄÄÄÄÄDefaultÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º LEFT SIDE VIEW º (ST-32430N) ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ If these ID jumpers are used, then ID jumpers shown in front view ARE NOT USED. FRONT TOP (HDA) J5 ÕÍÍ1¸ Õ͸BACK OF ÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵:::Æ͵J1 OF DRIVE BOTTOM ÔÍÍ; Ô;DRIVE ³³³ ID 1 ÄÙ³ÀÄ ID 4 ID 2 ÉÍÍÍÍÍÍÍÍÍÍÍÍ» º FRONT VIEW º (ST-32430N) ÈÍÍÍÍÍÍÍÍÍÍÍͼ ÚÄÄ´Reserved. Shipped with cover installed. ³ ÀDo not remove. Do not install jumpers TOP (HDA) ÕØÍÍ͸ 1 ÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵::::³::::::ÆÍÍ * BOTTOM ÔÍÍÍ;123456 ³ J6 ³³³³³³ LED ÄÙ ³³³³³³ ID 4 Ù³³³³À Reserved ID 2 ÄÙ³³ÀÄ Remote LED (pin-3 +5v) ID 1 ÄÄÙÀÄÄ Reserved If these ID jumper are used, then ID jumpers shown in left side view J5 ARE NOT USED. ST-32430N Hawk 2LP UNFORMATTED CAPACITY (MB) ________________2590 FORMATTED CAPACITY (xx SECTORS) (MB) _____2140 AVERAGE SECTORS PER TRACK ________________116 ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________19,960 CYLINDERS ________________________________3992 HEADS ______PHYSICAL______________________9 DISCS (3.5 in) ___________________________5 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec)________35.8 to 62.2 EXTERNAL TRANSFER RATE (mbyte/sec) _______5.2 Async EXTERNAL TRANSFER RATE (mbyte/sec) _______10 Sync SPINDLE SPEED (RPM) ______________________5411 AVERAGE LATENCY (mSEC) ___________________5.54 BUFFER ___________________________________512 KByte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 FAST ASA II TPI (TRACKS PER INCH) ____________________4200 AVERAGE ACCESS (ms) (read/write)__________10.4/11.4 Including controller overhead SINGLE TRACK SEEK (ms) (read/write)_______2.1/2.5 MAX FULL SEEK (ms) (read/write)___________20.4/21.4 MTBF (power-on hours) ____________________800,000 SHOCK (G's): operating (Read/Write) __________10 nonoperating ____________________75 ACOUSTICS (typ/max dBA) __________________ POWER REQUIREMENTS: +12V START-UP (amps) _2.0 +12V TYPICAL (amps) __0.35 +5V START-UP (amps) __0.61 +5V TYPICAL (amps) ___0.35 TYPICAL (watts) ______6 MAXIMUM (watts) ______9 LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Physical: Height (inches/mm): 1.00/25.4 Width (inches/mm): 4.02/101.6 Depth (inches/mm): 5.74/145.8 Weight (lbs/kg): 1.5/0.68 Already low-level formatted at the factory with 1 spare sector per head (all spare sectors are on one track) and 2 spare cylinders per unit. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (08/26/94) SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1993 ST-32430W/WD/WC Fast Wide SCSI-2 (Hawk 2LP) ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º (ST-32430W/WD only) ÈÍÍÍÍÍÍÍÍÍÍͼ (TOP) Auxiliary ___________________ ÚÄÄ Ä1¿/ÍÍÍÍÍÍÍÍÍ\ Í( ×××××××××××××××××1)ͳ::::::³³ 0 0 0 0 ÆÍ \ÄÄÄÄÄÄÄÄÄÄÄijÄÄÄÄ/ À ÄÄ ÙÀÄ5ÄGÄGÄ12Ù 68 pin I/O CableÙ ³³³³³³ Connection Male ³³³³³³ ³³³³³³ ³³³³³³ Auxiliary option header ³³³³³³ pin-11 +5v ÄÄÄÄÄÄÄÄÄÙ³³³³³ pin-10 GND ÄÄÄÄÄÄÄÄÄÄÙ³³³³ SCSI ID = 8 ÄÄÄÄÄÄÄÄÄÄÄÙ³³³ SCSI ID = 4 ÄÄÄÄÄÄÄÄÄÄÄÄ´³³ or pin-6 REFIND+ ÄÄÄÄÄÄÙ³³ SCSI ID = 2 ÄÄÄÄÄÄÄÄÄÄÄÄÄÙ³ SCSI ID = 1 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ SCSI ID = 0 (none) ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º (ST-32430WC only) ÈÍÍÍÍÍÍÍÍÍÍͼ 80 pin I/O and DC Power Wall/bracket Connection ³ Female J1 /ÄÄÄijÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ\ TOP (HDA) ÍÍÍÍÍÍÍÍÍÍ/ ×××××××××××××××××××× \ÍÍÍÍÍÍÍÍÍÍ (\Ä1ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ40/) BOTTOM Notes on 80 pin I/O connector: pins 1 - 4 = +12v 41 - 44 = 12v GND 34 - 36 = +5v 74 - 76 = 5v GND 37 = SYNC 77 = LEDC 38 = MTRON 78 = DLYDST 39 = SCSIA0 79 = SCSIA1 40 = SCSIA2 80 = SCSIA3 Mating NC connector: AMP US p/n: 2-557103-1 straight-in, Male 80-pin 2-557101-1 right angle to PCB ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º RIGHT SIDE VIEW º (Both ST-32430W and ST-32430WC) ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ BACK Õ͸ J2 12345678 TOP (HDA) FRONT OF J1ÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ OF DRIVE Ô; :::::::: BOTTOM DRIVE ³³³³³³³³ ³Terminator Power Ù³³³³³³À Reserved Ú´Terminator Power ÄÙ³³³³ÀÄ Start Delay (12 secs * ID) ³ Enable T-Res ÄÄÙ³³ÀÄÄ Motor Start ³ Parity Enable ÄÄÄÙÀÄÄÄ Write Protect ³ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÀÄ´ Termination Power-source Table ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ÍÍÍÍÍ....ÍÍÍÍÍ....ÍÍÍÍÍPWA edgeÍÍÍÍÍ ³ ³ ³ ³ 1 2 1 2 1 2 ³ ³ ÖÄ· ÖÄ· ÖÄÄÄ· A Drive Supplies Bus ³ ³ ºøºø øºøº ÓøÄø½ B Drive Supplies Own ³ ³ Óø½ø øÓø½ ø ø C Bus Supplies Drive ³ ³ A B C ³ ÀÄÄÄÄÄÄÄÄÄDefaultÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Note: The model ST-32430WC drive cannot furnish terminator power, because no pins on the 80 pin I/O connector are devoted to terminator power. ÉÍÍÍÍÍÍÍÍÍÍÍÍ» º FRONT VIEW º (Both ST-32430W and ST-32430WC) ÈÍÍÍÍÍÍÍÍÍÍÍͼ TOP (HDA) J6 ÕÍÍÍÍÍ1¸ ÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵::::::ÆÍ * BOTTOM ÔÍÍÍÍÍ; ³ ³³³³³³ LED ÄÙ ³³³³³³ ³³³³³³ ³³³³³³ Auxiliary option header ³³³³³³ pin-11 +5v ÄÄÄÄÄÄÄÄÄÙ³³³³³ pin-10 GND ÄÄÄÄÄÄÄÄÄÄÙ³³³³ SCSI ID = 8 ÄÄÄÄÄÄÄÂÄÄÄÙ³³³ or pin-8 BUSY ÄÄÄÄÙ ³³³ SCSI ID = 4 ÄÄÄÄÄÄÄÂÄÄÄÄÙ³³ or pin-6 REFIND+ ÄÙ ³³ SCSI ID = 2 ÄÄÄÄÄÄÄÄÄÄÄÄÄÙ³ SCSI ID = 1 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ SCSI ID = 0 (none) If these ID jumper are used, then ID jumpers shown in left side view J5 or 80 pin I/O cable ARE NOT USED. ST-32430W Hawk 2LP UNFORMATTED CAPACITY (MB) ________________2600 FORMATTED CAPACITY (xx SECTORS) (MB) _____2147 AVERAGE SECTORS PER TRACK ________________116 ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________35,928 CYLINDERS ________________________________3992 HEADS ______PHYSICAL______________________9 DISCS (3.5 in) ___________________________5 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec)________35.8 to 62.2 EXTERNAL TRANSFER RATE (mbytes/sec)_______20 Sync. SPINDLE SPEED (RPM) ______________________5411 AVERAGE LATENCY (mSEC) ___________________5.54 BUFFER ___________________________________512 KByte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 FAST Wide ASA II TPI (TRACKS PER INCH) ____________________4200 AVERAGE ACCESS (ms) (read/write)__________10.4/11.4 Drive level with controller overhead SINGLE TRACK SEEK (ms) (read/write)_______2.1/2.5 MAX FULL SEEK (ms) (read/write)___________20.4/21.4 MTBF (power-on hours) ____________________800,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.0 +12V TYPICAL (amps) __0.35 +5V START-UP (amps) __0.61 +5V TYPICAL (amps) ___0.36 TYPICAL (watts) ______7 MAXIMUM (watts) ______ WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Physical: Height (inches/mm): 1.00/25.4 Width (inches/mm): 4.02/102.1 Depth (inches/mm): 5.77/146.6 Weight (lbs/kg): 1.5/0.68 Already low-level formatted at the factory with 8 spare sectors per cylinder and 2 spare cylinders/unit. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (10/24/94) SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1994 ST-32550N SCSI-2 Fast (Barracuda 2LP) ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º (ST-32550N/ND) ÈÍÍÍÍÍÍÍÍÍÍͼ 50 pin I/O Cable Connection ³ ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ1¸ /ÄÄÄÄÄÄÄÄÄ\ TOP (HDA) ͵:::::::::::::::::::::::::Æͳ 0 0 0 0 ³ÍÍ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÀÄ5ÄGÄGÄ12Ù BOTTOM (o o) - These pins not on differential ÚÄÄÄÄÄÄ o o model ND ³ o o ³ 2 1 ³ ÚÄ J1 Terminator options ÄÁÄ (single-ended) ÄÄÄÄÄÄÄÄÄÄÄ¿ ³ o o (o o) o o o o ÕoÍo¸ ³ ³ o o oÕo¸ Õo¸o ÕoÑo¸ o o ³ ³ ÕoÍo¸ o³o³ ³o³o ³o³o³ o o ³ ³ 2ÍÍÍ1 2 ÔÍ1 2; 1 2ÍÏÍ1 2 1 ³ ³ A B C D E ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ A - Term. power from drive (default) B - Term. power to SCSI bus (only option available for differential ND) C - Term. power from SCSI bus D - Term. power to SCSI bus and drive E - Enable SCSI terminator (jumper on pins 5-6) ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º RIGHT SIDE VIEW º (ST-32550N) ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ BACK Õ͸ J2 123456789 TOP (HDA) FRONT OF I/OÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ OF DRIVE Ô; ::::::::: BOTTOM DRIVE ³³³³³³³³³ 1-2 Reserved ÄÄÁÙ³³³³ÀÁÁÄÄ Reserved 7-9 3 Parity Disable ÄÄÄÄÙ³³ÀÄÄÄÄÄ Delay Motor Start 6 4 Write Protect ÄÄÄÄÄÙÀÄÄÄÄÄÄ Motor Start Enable 5 ÉÍÍÍÍÍÍÍÍÍÍÍÍ» º FRONT VIEW º (ST-32550N) ÈÍÍÍÍÍÍÍÍÍÍÍͼ J4 TOP (HDA) 1 ÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵::::::::::ÆÍÍ BOTTOM ³³³³³³³³³³ ³³³³³³³³³³ Reserved ÄÁÁÁÙ³³³³³ÀÄ Reserved ID 4 ÄÄÄÄÄÙ³³³ÀÄÄ Remote LED (pin-3 +5v) ID 2 ÄÄÄÄÄÄÙ³ÀÄÄÄ Spindle Synchronization ID 1 ÄÄÄÄÄÄÄÙ (pin-6 REF SIG+, default jumper installed) ST-32550N Barracuda 2LP UNFORMATTED CAPACITY (MB) ________________2541.3 FORMATTED CAPACITY (xx SECTORS) (MB) _____2147.4 AVERAGE SECTORS PER TRACK ________________108 rounded down ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________38,610 CYLINDERS ________________________________3,510 user HEADS ______PHYSICAL______________________11 DISCS (3.5 in) ___________________________6 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec)________49.4 to 72.0 EXTERNAL TRANSFER RATE (mbyte/sec) _______5 Async EXTERNAL TRANSFER RATE (mbyte/sec) _______2.5 to 10 Sync SPINDLE SPEED (RPM) ______________________7,200 AVERAGE LATENCY (mSEC) ___________________4.17 BUFFER ___________________________________512 KByte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 FAST ASA II BYTES PER TRACK __________________________64,160 average SECTORS PER DRIVE ________________________ TPI (TRACKS PER INCH) ____________________4,048 BPI (BITS PER INCH) ______________________72,680 AVERAGE ACCESS (ms) (read/write)__________8.0/9.0 Drive level without controller overhead SINGLE TRACK SEEK (ms) ___________________0.6/0.9 MAX FULL SEEK (ms) _______________________17/19 MTBF (power-on hours) ____________________800,000 SHOCK (G's): operating (Read/Write) __________2 nonoperating ____________________50 ACOUSTICS (typ/max dBA) __________________4.7/ POWER REQUIREMENTS: +12V START-UP (amps) _1.26 +12V TYPICAL (amps) __0.88 idle +5V START-UP (amps) __0.91 +5V TYPICAL (amps) ___0.33 idle IDLE (watts) _________ LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Physical: Height (inches/mm): 1.00/25.4 Width (inches/mm): 4.00/101.6 Depth (inches/mm): 5.75/146.05 Weight (lbs/g): 1.2/545 Already low-level formatted at the factory with 9 spare sectors per cylinder and 1 spare cylinder per unit. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (08/25/94)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1994 ST-32550W/WC SCSI-2 Fast Wide (Barracuda 2LP) ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º (ST-32550W only) ÈÍÍÍÍÍÍÍÍÍÍͼ ÚÄÄÄÄÄ ID 8 ³ÚÄÄÄÄ ID 4 ³³ÚÄÄÄ ID 2 ³³³ÚÄÄ ID 1 (TOP) J5 ³³³³ ___________________ ÚÄÄ Ä1¿/ÍÍÍÍÍÍÍÍÍ\ Í( ×××××××××××××××××1)ͳ::::::³³ 0 0 0 0 ÆÍ \ÄÄÄÄÄÄÄÄÄÄÄijÄÄÄÄ/ À ÄÄ ÙÀÄ5ÄGÄGÄ12Ù 68 pin I/O CableÙ ³³ Connection ³³ (o o) - These pins not on ³³ o o differential model WD Spindle Synch Cable Connector ÄÄÙ³ o o (pin-11 SSREF, pin-12 ground) ³ 2 1 Remote LED Connector ÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ [pin-9 cathode (neg), ³ pin-10 anode (pos)] ³ ³ ³ ÚÄ J1 Terminator options ÄÁÄ (single-ended) ÄÄÄÄÄÄÄÄÄÄÄ¿ ³ o o (o o) o o o o ÕoÍo¸ ³ ³ o o oÕo¸ Õo¸o ÕoÑo¸ o o ³ ³ ÕoÍo¸ o³o³ ³o³o ³o³o³ o o ³ ³ 2ÍÍÍ1 2 ÔÍ1 2; 1 2ÍÏÍ1 2 1 ³ ³ A B C D E ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ A - Term. power from drive (default) B - Term. power to SCSI bus (only option available for differential WD) C - Term. power from SCSI bus D - Term. power to SCSI bus and drive E - Enable SCSI terminator (jumper on pins 5-6) ÉÍÍÍÍÍÍÍÍÍÍÍ» º REAR VIEW º (ST-32550WC only) ÈÍÍÍÍÍÍÍÍÍÍͼ 80 pin I/O and DC Power Wall/bracket Connection ³ Female J1 /ÄÄÄijÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ\ TOP (HDA) ÍÍÍÍÍÍÍÍÍÍ/ ×××××××××××××××××××× \ÍÍÍÍÍÍÍÍÍÍ (\Ä1ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ40/) BOTTOM Notes on 80 pin I/O connector: pins 1 - 4 = +12v 41 - 44 = 12v GND 34 - 36 = +5v 74 - 76 = 5v GND 37 = SYNC 77 = LEDC 38 = MTRON 78 = DLYDST 39 = SCSIA0 79 = SCSIA1 40 = SCSIA2 80 = SCSIA3 Mating WC connector: AMP US p/n: 2-557103-1 straight-in, Male 80-pin 2-557101-1 right angle to PCB ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ» º RIGHT SIDE VIEW º (ST-32550W/WC) ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ BACK Õ͸ J2 123456789 TOP (HDA) FRONT OF I/OÆÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ OF DRIVE Ô; ::::::::: BOTTOM DRIVE ³³³³³³³³³ 1-2 Reserved ÄÄÁÙ³³³³ÀÁÁÄÄ Reserved 7-9 3 Parity Disable ÄÄÄÄÙ³³ÀÄÄÄÄÄ Delay Motor Start 6 4 Write Protect ÄÄÄÄÄÙÀÄÄÄÄÄÄ Motor Start Enable 5 ÉÍÍÍÍÍÍÍÍÍÍÍÍ» º FRONT VIEW º (ST-32550W/WC) ÚÄÄÄÄÄÄÄ +5V ÈÍÍÍÍÍÍÍÍÍÍÍͼ ³ÚÄÄÄÄÄÄ Enable SCSI terminator ³³ÚÄÄÄÄÄ ID 8 ³³³ÚÄÄÄÄ ID 4 ³³³³ÚÄÄÄ ID 2 ³³³³³ÚÄÄ ID 1 (J4 top row) TOP (HDA) ³³³³³³1 ÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͵::::::::::ÆÍÍ J4 BOTTOM ³³³³³³³³³³ ³³³³³³³³³³ (J4 bottom row) Reserved ÄÁÁÁÙ³³³³³³ No connection ÄÄÄÄÄÙ³³³³³ Ground ÄÄÄÄÄÄÙ³³³³ Unit Active LED pin (+) ÄÄÄÄÄÄÄÙ³³³ SSREF (+) spindle sync ÄÄÄÄÄÄÄÄÙ³³ Vendor Unique ÄÄÄÄÄÄÄÄÄÙ³ Fault LED pin (+) ÄÄÄÄÄÄÄÄÄÄÙ ST-32550W Barracuda 2LP UNFORMATTED CAPACITY (MB) ________________2541.3 FORMATTED CAPACITY (xx SECTORS) (MB) _____2147.4 AVERAGE SECTORS PER TRACK ________________108 rounded down ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________38,610 CYLINDERS ________________________________3,510 user HEADS ______PHYSICAL______________________11 DISCS (3.5 in) ___________________________6 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec)________49.4 to 72.0 EXTERNAL TRANSFER RATE (mbyte/sec) _______5 Async EXTERNAL TRANSFER RATE (mbyte/sec) _______5.0 to 20 Sync SPINDLE SPEED (RPM) ______________________7,200 AVERAGE LATENCY (mSEC) ___________________4.17 BUFFER ___________________________________512 KByte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 FAST Wide ASA II BYTES PER TRACK __________________________64,160 average SECTORS PER DRIVE ________________________ TPI (TRACKS PER INCH) ____________________4,048 BPI (BITS PER INCH) ______________________72,680 AVERAGE ACCESS (ms) (read/write)__________8.0/9.0 Drive level without controller overhead SINGLE TRACK SEEK (ms) ___________________0.6/0.9 MAX FULL SEEK (ms) _______________________17/19 MTBF (power-on hours) ____________________800,000 SHOCK (G's): operating (Read/Write) __________2 nonoperating ____________________50 ACOUSTICS (typ/max dBA) __________________4.7/ POWER REQUIREMENTS: +12V START-UP (amps) _1.26 +12V TYPICAL (amps) __0.88 idle +5V START-UP (amps) __0.91 +5V TYPICAL (amps) ___0.33 idle IDLE (watts) _________ LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Physical: Height (inches/mm): 1.00/25.4 Width (inches/mm): 4.00/101.6 Depth (inches/mm): 5.75/146.05 Weight (lbs/g): 1.2/545 Already low-level formatted at the factory with 9 spare sectors per cylinder and 1 spare cylinder per unit. ZBR = Zone Bit Recording = Variable sectors per track Seagate reserves the right to change, without notice, product offerings or specifications. (08/25/94)  ST-410800N Elite 9 Fast SCSI-2 ÚÄ Terminator Power Source (see below)ÄÄ¿ 4o³o3 ³ J4A 2o o1 J4B ³ o o o o o o A R o o Power o o o o ³ o o o o o o g F o o ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ Ú12ÄGÄGÄ5Ä¿ o o o o ³ ÍØÍØÍØÍØÍØÍØÍÍØÍØÍØÍÍØ͵::::::::::::::::::::::::1Æ͵ 0 0 0 0 ÆÍØÍØÍØÍØÍÍ ³ ³ 4 2 1 ³ ³ ÃÄÙ ³ ³ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; \ÄÄÄÄÄÄÄÄÄ/ ³ ³ ³ ³ ³ ³ ÄÄÂÄÄ ³ ³ ³ ³ ³ SCSI Cable Connector ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ÀÄÄ Spindle Synch Cable Connector ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ (top pin: SSREF, bottom: ground) ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ÀÄÄÄÄÄ Terminator Enable ³ ³ ³ ³ ³ ³ ³ ³ ³ ÀÄÄÄÄÄÄÄÄÄ LED Connection (g: ground pin) ³ ³ ³ ³ ³ ³ ³ ³ ³ Activity (A-G) ³ ³ ³ ³ ³ ³ ³ ³ ³ Ready (R-G) ³ ³ ³ ³ ³ ³ ³ ³ ³ Fault (F-G) ³ ³ ³ ³ ³ ³ ³ ³ ÀÄ Reserved ³ ³ ³ ³ ³ ³ ³ ÀÄÄÄ Write Protect Enable Spinup Delay ÄÙ ³ ³ ³ ³ ³ ÀÄÄÄÄÄÄÄ SCSI ID (10 secs * ID) ³ ³ ³ ³ ÀÄÄÄÄÄÄÄÄÄÄÄ Reserved Motor Start option enable ÄÄÄÙ ³ ³ ³ Parity check DISable ÄÄÄÄÄÙ ³ ³ Reserved ÄÄÄÄÄÄÄÙ ³ ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ ³ ³ Terminator Power Source Options ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ 2 & 4 Ä Initiator supplies power over the SCSI Bus for terminators. ³ ³ Drive supplies no terminator power. ³ ³ 1 & 2 Ä Drive supplies power for its own terminator resistor-paks ³ ³ but not to SCSI Bus. This is the factory setting. ³ ³ 1 & 3 ³ ³ AND Ä Drive supplies power for external terminator at end of the ³ ³ 2 & 4 daisy chain. Terminator resistor-paks must be removed. ³ ³ This option is recommended only for last drive on daisy ³ ³ chain. ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ST410800ND drives are shipped without terminators and have empty terminator sockets on the PCB. You must provide termination resistors for these drives. ST-410800N Elite 9 UNFORMATTED CAPACITY _____________________10,800 FORMATTED CAPACITY (512 byte blk) ________9,090 AVERAGE SECTORS PER TRACK ________________133 (rounded down) ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________132,975 CYLINDERS ________________________________4925 HEADS ____________________________________27 DISCS (5.25 in) __________________________14 MEDIA TYPE _______________________________THIN FILM HEAD TYPE ________________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec) _______45-66 INTERNAL TRANSFER RATE AVG (mbyte/sec) ___7.2 EXTERNAL TRANSFER RATE (mbyte/sec) _______10 (burst) SPINDLE SPEED (RPM) ______________________5,400 AVERAGE LATENCY (mSEC) ___________________5.55 COMMAND OVERHEAD (mSEC) __________________<0.5 BUFFER ___________________________________1024 Kbyte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 FAST BYTES PER TRACK __________________________63,000-91,000 SECTORS PER DRIVE ________________________17,845,731 BYTES PER CYLINDER _______________________1,058,400 to 1,587,600 TPI (TRACKS PER INCH) ____________________3,979 BPI (BITS PER INCH) ______________________ AVERAGE ACCESS (ms) read/write ___________11/12 SINGLE TRACK SEEK (ms) read/write ________0.9/1.7 MAX FULL SEEK (ms) read/write ____________23/24 MTBF (power-on hours) Class A Room _______NA MTBF (power-on hours) Office _____________500,000 POWER DISSIPATION (watts/BTUs) Active ____25/85 Idle ______21/72 POWER REQUIREMENTS: Single-ended/Differential +12V START-UP (amps) _3.98/4.60 +12V TYPICAL (amps) __1.90/1.88 +5V START-UP (amps) __2.37/3.48 +5V TYPICAL (amps) ___1.96/2.77 TYPICAL ( watts seek/read)_32.60/36.41 IDLE (watts) ______________28.34/31.81 USER MANUAL PART NUMBER __________________ ** Already low-level formatted at the factory with nine spare sectors per cylinder, one spare cylinders/unit, one system cylinder/unit, and one diagnostic cylinder/unit. Physical: Height (inches/mm): 3.25/82.6 Width (inches/mm): 5.75/146.1 Depth (inches/mm): 8.0/203 Weight (lbs/kg): 7.8/3.6 Seagate reserves the right to change, without notice, product offerings or specifications. (03/24/94) ST-410800W Elite 9 Fast SCSI-2 Wide ÚÄ Terminator Power Source (see below)ÄÄ¿ 4o³o3 ³ J4A 2o o1 J4B ³ o o o o o o A R o o Power o o o o ³ o o o o o o g F o o ___________________ Ú12ÄGÄGÄ5Ä¿ o o o o ³ ÍØÍØÍØÍØÍØÍØÍÍØÍØÍØÍÍØÍÍÍ( ×××××××××××××××××1)ÍÍÍÍ͵ 0 0 0 0 ÆÍØÍØÍØÍØÍÍ ³ 8 4 2 1 ³ ³ ÃÄÙ ³ ³ \ÄÄÄÄÄÄÄÄÄÄÄijÄÄÄÄ/ \ÄÄÄÄÄÄÄÄÄ/ ³ ³ ³ ³ ³ ÄÄÄÂÄÄÄ ³ ³ ³ ³ ³ SCSI Cable Connector 68-pin ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ÀÄÄ Spindle Synch Cable Connector ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ (top pin: SSREF, bottom: ground) ³ ³ ³ ³ ³ ³ ³ ³ ³ ÀÄÄÄÄÄ Terminator Enable ³ ³ ³ ³ ³ ³ ³ ³ ÀÄÄÄÄÄÄÄÄÄ LED Connection (g: ground pin) ³ ³ ³ ³ ³ ³ ³ ³ Activity (A-G) ³ ³ ³ ³ ³ ³ ³ ³ Ready (R-G) ³ ³ ³ ³ ³ ³ ³ ³ Fault (F-G) ³ ³ ³ ³ ³ ³ ³ ÀÄ Reserved ³ ³ ³ ³ ³ ³ ÀÄÄÄ Write Protect Enable Spinup Delay ÄÙ ³ ³ ³ ³ ÀÄÄÄÄÄÄÄÄ SCSI ID (10 secs * ID) ³ ³ ³ ³ Motor Start option enable ÄÄÄÙ ³ ³ ³ Parity check DISable ÄÄÄÄÄÙ ³ ³ Reserved ÄÄÄÄÄÄÄÙ ³ ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ ³ ³ Terminator Power Source Options ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ 2 & 4 Ä Initiator supplies power over the SCSI Bus for terminators. ³ ³ Drive supplies no terminator power. ³ ³ 1 & 2 Ä Drive supplies power for its own terminator resistor-paks ³ ³ but not to SCSI Bus. This is the factory setting. ³ ³ 1 & 3 ³ ³ AND Ä Drive supplies power for external terminator at end of the ³ ³ 2 & 4 daisy chain. Terminator resistor-paks must be removed. ³ ³ This option is recommended only for last drive on daisy ³ ³ chain. ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ST410800WD drives are shipped without terminators and have empty terminator sockets on the PCB. You must provide termination resistors for these drives. ST-410800W Elite 9 UNFORMATTED CAPACITY _____________________10,800 FORMATTED CAPACITY (512 byte blk) ________9,090 AVERAGE SECTORS PER TRACK ________________133 (rounded down) ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________132,975 CYLINDERS ________________________________4925 HEADS ____________________________________27 DISCS (5.25 in) __________________________14 MEDIA TYPE _______________________________THIN FILM HEAD TYPE ________________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec) _______45-66 INTERNAL TRANSFER RATE AVG (mbyte/sec) ___7.2 EXTERNAL TRANSFER RATE (mbyte/sec) _______10 (burst) SPINDLE SPEED (RPM) ______________________5,400 AVERAGE LATENCY (mSEC) ___________________5.55 COMMAND OVERHEAD (mSEC) __________________<0.5 BUFFER ___________________________________1024 Kbyte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 FAST BYTES PER TRACK __________________________63,000-91,000 SECTORS PER DRIVE ________________________17,845,731 BYTES PER CYLINDER _______________________1,058,400 to 1,587,600 TPI (TRACKS PER INCH) ____________________3,979 BPI (BITS PER INCH) ______________________ AVERAGE ACCESS (ms) read/write ___________11/12 SINGLE TRACK SEEK (ms) read/write ________0.9/1.7 MAX FULL SEEK (ms) read/write ____________23/24 MTBF (power-on hours) Class A Room _______NA MTBF (power-on hours) Office _____________500,000 POWER DISSIPATION (watts) ________________ POWER REQUIREMENTS: Single-ended/Differential +12V START-UP (amps) _3.98/4.60 +12V TYPICAL (amps) __1.90/1.88 +5V START-UP (amps) __2.37/3.48 +5V TYPICAL (amps) ___1.96/2.77 TYPICAL ( watts seek/read)_32.60/36.41 IDLE (watts) ______________28.34/31.81 USER MANUAL PART NUMBER __________________ OTHER ____________________________________ Synchronized Spindles, Sweep Cycle Capability ** Already low-level formatted at the factory with nine spare sectors per cylinder, one spare cylinders/unit, one system cylinder/unit, and one diagnostic cylinder/unit. Physical: Height (inches/mm): 3.25/82.6 Width (inches/mm): 5.75/146.1 Depth (inches/mm): 8.0/203 Weight (lbs/kg): 7.8/3.6 Seagate reserves the right to change, without notice, product offerings or specifications. (03/24/94) SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-41200N (94601-1200) Wren 7 SCSI and SCSI-2 ÚÄÄ Some 16-pin configurations may not have these pins. ³ ³ ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ /Ä4Ä3Ä2Ä1Ä\ ÍÍÍÍÍPÍWÍAÍÍÍÍÍØÍ͵:::SCSI:Cable:::::::::::::::1Æ͵ 0 0 0 0 ÆÍÍ ÚÄ¿ ³ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÀÄ5ÄGÄGÄ12Ù ³o³o o o o o o(o)o ÚÄÄÄÄÄÄÄÄ1ÚÄÄÄÄÄÄÄÄ1ÚÄÄÄÄÄÄÄÄ1 Power ÅoÅo o o o o o(o)o ÀÄÄÄÄÄÄÄÄÙÀÄÄÄÄÄÄÄÄÙÀÄÄÄÄÄÄÄÄÙ ÀÄÙ 4 2 1 M P ³ ³ Terminator Resistor SIPS ³ ÄÄÂÄÄ ³ ³ ³ ³ ³ ³ ³ ³ ³ ÀÄ Reserved ³ ³ ³ ³ ÀÄÄÄ Motor Start Delay ( 16 sec * ID) ³ ³ ³ ÀÄÄÄÄÄ Parity option enable ³ ³ ÀÄÄÄÄÄÄÄ Motor Start option enable ³ ÀÄÄÄÄÄÄÄÄÄÄÄ Drive ID's, ID 0 (none) if only SCSI device ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅ Terminator power from Drive (vertical) À Terminator power from Bus (lower horizontal) ST-41200N 94601-12G/M WREN 7 FH UNFORMATTED CAPACITY (MB) ________________1.2G FORMATTED CAPACITY (xx SECTORS) (MB) _____1037 AVERAGE SECTORS PER TRACK ________________71 ACTUATOR TYPE ____________________________VOICE COIL TRACKS ___________________________________28965 CYLINDERS ________________________________1931 HEADS ____________________________________15 DISCS ____________________________________8 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) TRANSFER RATE (mbytes/sec) _______________1.875-2.875 SPINDLE SPEED (RPM) ______________________3,600 AVERAGE LATENCY (mSEC) ___________________8.33 BUFFER ___________________________________256 Kbyte SCSI-1: Read Look-Ahead, Non_Adaptive, Single-Segmented Buffer SCSI-2: Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 TPI (TRACKS PER INCH) ____________________1600 BPI (BITS PER INCH) ______________________32750 AVERAGE ACCESS (ms) ______________________15 SINGLE TRACK SEEK (ms) ___________________2.5 MAX FULL SEEK (ms) _______________________34 MTBF (power-on hours) ____________________150,000 POWER REQUIREMENTS: +12V START-UP (amps) _4.5 +12V TYPICAL (amps) __1.6 +5V START-UP (amps) __1.1 +5V TYPICAL (amps) ___0.8 TYPICAL (watts) ______24 MAXIMUM (watts) ______60 BUFFERED STEP PULSE RATE (micro sec) _____ WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE ZBR = Zone Bit Recording = Variable sectors per track Already low-level formatted at the factory. Seagate reserves the right to change, without notice, product offerings or specifications. (6/26/90)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-41520N (97501-16G) Elite-1 FH SCSI-2 Ö Ä Ä Ä Ä Ä · ÚÄÄÄÄÄÄÄÄÄ Parity DISable º I/O Board º ³ ÚÄÄÄÄÄÄÄ Spinup Delay (10 sec) Ó Ä Ä Ä Ä Ä ½ ³ ³ ÚÄÄÄÄÄ Manual Reset ³ ³ ³ ÚÄÄÄ Active LED (red) ÚÄÄ Spindle Sync ³ ³ ³ ³ ÚÄ Heartbeat LED (green) A³ SCSI ID ÄÄ¿ ³ ³ ³ ³ ³ 1o-o¿ ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ ³ o o o   ´p nà ³::::::::::::::::::::::::1³ ÄÄÁÄÄ o o o ³o o³ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; o o o o Ào-oÙ ÚÄÄÄÄÄÄÄÄÄÄ1 ÚÄÄÄÄÄÄÄÄÄÄ1 o o o o o-o5 ÀÄÄijÄÄÄÄÄÄÙ ÀÄÄijÄÄÄÄÄÄÙ 4 2 1 ³ ³B À T-RES À T-RES only on Motor Start ÄÄÙ ³ 3o o4 Differential Enable ÀÄÄ Select 2o³o1 Plug ³ ³ DC Power Connector J15 ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÏÍÍÍÍÍÍÍÍ͸ 0Ä0Ä0Ä0Ä0Ä0Ä0Ä0Ä0Ä1 ³ Terminator Power Source Options ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ 2 & 3 Ä Host supplies power over the SCSI Bus for terminators. ³ ³ Drive supplies no terminator power. ³ ³ 1 & 2 Ä Drive supplies power for its own terminator resistor-paks ³ ³ but not to SCSI Bus. This is the factory setting. ³ ³ 4 - Not used. ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Ö Ä Ä Ä Ä Ä Ä · º Servo Board º Ó Ä Ä Ä Ä Ä Ä ½ Fault LED (red) ÄÄÄÄÄÄ¿ Ready LED (green) ÄÄÄ¿ ³ DIP SWITCHES Unit Selected (amber) ¿ ³ ³ S3 S2 S1 ³ ³ ³ ÚÄÄÄÄÄÄÄÄ¿ÚÄÄÄÄÄÄÄÄ¿ÚÄÄÄÄÄÄÄÄ¿On    ³12345678³³12345678³³12345678³ ÀÄÄÄÄÄÄÄÄÙÀÄÄÄÄÄÄÄÄÙÀÄÄÄÄÄÄÄÄÙOff ÀÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÙ³ ³³³³ÀÄÂÙ ³ ³ ³³³³ ³ Sector Switches (all OFF) ÄÄÙ ³ ³³³³ ³ Runt Sector Ä8ÄÄÄÄÄÄÄÄÙ ³³³³ ³ Sweep Cycle Enable Ä1ÄÄÄÄÄÄÄÄÄÄÄÙ³³³ ³ Enable Sweep only on seeks Ä2ÄÄÄÄÄÄÄÄÄÄÄÄÙ³³ ³ Manufacturing Test (keep OFF) Ä3ÄÄÄÄÄÄÄÄÄÄÄÄÄÙ³ ³ Write Enable (default ON) Ä4ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ³ Unit Select Switches (all OFF) Ä6Ä8ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ST-41520N Elite-1 FH UNFORMATTED CAPACITY _____________________1,600,930,800 FORMATTED CAPACITY (xx SECTORS) __________1,370,545,152 ** AVERAGE SECTORS PER TRACK (with spares)___74.945 ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS/USER ______________________________35,717/35,666 CYLINDERS/USER ___________________________2,101/2,098 HEADS ____________________________________17 DISCS ____________________________________10 MEDIA TYPE _______________________________THIN FILM HEAD TYPE ________________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (2,7) INTERNAL TRANSFER RATE (mbits/sec) _______26 to 36 EXTERNAL TRANSFER RATE (mbytes/sec) ______5 SPINDLE SPEED (RPM) ______________________5,400 AVERAGE LATENCY (mSEC) ___________________5.56 COMMAND OVERHEAD (msec) __________________<0.5 BUFFER ___________________________________256 Kbyte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 BYTES PER TRACK __________________________36,400 to 50,400 SECTORS PER DRIVE ________________________2,768,896 BYTES PER CYLINDER _______________________618,800 to 856,800 TPI (TRACKS PER INCH) ____________________ BPI (BITS PER INCH) ______________________ AREAL DENSITY ____________________________ AVERAGE ACCESS (ms) ______________________11.5 SINGLE TRACK SEEK (ms) ___________________1.7 MAX FULL SEEK (ms) _______________________22.5 MTBF (power-on hours) Class A Room _______250,000 MTBF (power-on hours) Office _____________150,000 POWER DISSIPATION (watts/BTU) ____________ POWER REQUIREMENTS: Single-ended/Differential +12V START-UP (amps) _2.2/3.2 +12V TYPICAL (amps) __1.8/1.8 +5V START-UP (amps) __2.1/2.9 +5V TYPICAL (amps) ___2.0/2.3 TYPICAL (watts) ______31.6/33.1 MAXIMUM (watts) ______36.9/39.4 LANDING ZONE (cyl) _______________________AUTO PARK USER MANUAL PART NUMBER __________________83327300 REFERENCE MANUAL PART NUMBER _____________86627310 IBM AT DRIVE TYPE ________________________0 or NONE OTHER ____________________________________DUAL PORT ZBR = Zone Bit Recording = Variable sectors per track ** Already low-level formatted at the factory with six spare sectors per cylinder, one spare cylinders/unit, one system cylinder/unit, and one diagnostic cylinder/unit. Physical: Height (inches/mm): 3.25/82.6 Width (inches/mm): 5.75/146.1 Depth (inches/mm): 9.9/252.5 Weight (lbs/kg): 9/4.1 Seagate reserves the right to change, without notice, product offerings or specifications. (10/28/91)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-41600N (97501-16G) Elite-1 FH SCSI-2 ÚÄ This T-RES only on Differential model ³ (see below for T-RES descriptions) Spindle Sync ¿ ³ ÚÄ Terminator Power Source (see below)ÄÄ¿ Ú4ÄÄ1ÄÄ¿ ÚÄÄ*ÄÄÄ1 4o³o3 ÚÄÄÄÄÄÄ1 ³ p³o oo A ÀijÄÄÄÄÙ 2o o1 ÀÄijÄÄÄÙ ³ o o o o o n³o oo B ÀTerminator DIPSÙ Power o o o o ³ o o o o o ÀÄÄÄÄÄÄÙÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ Ú12ÄGÄGÄ5Ä¿ o o o o ³ ÍØÍØÍØÍØÍØÍÍPÍWÍAÍÍ͵::::::::::::::::::::::::1ÆÍ͵ 0 0 0 0 ÆÍØÍØÍØÍØÍÍ ³ 4 2 1 ³ ³ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; \ÄÄÄÄÄÄÄÄÄ/ ³ ³ ³ ³ ³ ÄÄÂÄÄ ³ ³ SCSI Cable Connector ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ÀÄÄ Master off/Slave on - Spindle Sync ³ ³ ³ ³ ³ ³ ÀÄÄÄÄ Write Protect option enable ³ ³ ³ ³ ³ ÀÄÄÄÄÄÄÄÄ SCSI ID ³ ³ ³ ³ ³ Spinup Delay (10 secs * ID) ÄÙ ³ ³ ³ ³ Motor Start option enable ÄÄÄÙ ³ ³ ³ Parity check DISable ÄÄÄÄÄÙ ³ ³ Sweep Cycle enable ÄÄÄÄÄÄÄÙ ³ ³ ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ ³ ³ Terminator Power Source Options ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ 2 & 4 Ä Initiator supplies power over the SCSI Bus for terminators. ³ ³ Drive supplies no terminator power. ³ ³ 1 & 2 Ä Drive supplies power for its own terminator resistor-paks ³ ³ but not to SCSI Bus. This is the factory setting. ³ ³ 1 & 3 ³ ³ AND Ä Drive supplies power for external terminator at end of the ³ ³ 2 & 4 daisy chain. Terminator resistor-paks must be removed. ³ ³ This option is recommended only for last drive on daisy ³ ³ chain. ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ T-RES descriptions: ST41600N 1 DIP ST41601N 2 SIPs ST41600ND 2 DIPs ST41601ND 2 DIPs ST-41600N Elite-1 FH UNFORMATTED CAPACITY ____ ________________1,600,930,800 FORMATTED CAPACITY (xx SECTORS) ____ _____1,370,545,152 ** AVERAGE SECTORS PER TRACK (with spares)___74.945 ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS/USER ______________________________35,717/35,666 CYLINDERS/USER ___________________________2,101/2,098 HEADS ____________________________________17 DISCS ____________________________________10 MEDIA TYPE _______________________________THIN FILM HEAD TYPE ________________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (2,7) INTERNAL TRANSFER RATE (mbits/sec) _______26 to 36 EXTERNAL TRANSFER RATE (mbytes/sec) ______5 SPINDLE SPEED (RPM) ______________________5,400 AVERAGE LATENCY (mSEC) ___________________5.56 COMMAND OVERHEAD (msec) __________________<0.5 BUFFER ___________________________________256 Kbyte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 BYTES PER TRACK __________________________36,120 to 50,400 SECTORS PER DRIVE ________________________2,676,846 TPI (TRACKS PER INCH) ____________________ BPI (BITS PER INCH) ______________________ AREAL DENSITY ____________________________ AVERAGE ACCESS (ms) ______________________11.5 SINGLE TRACK SEEK (ms) ___________________1.7 MAX FULL SEEK (ms) _______________________22.5 MTBF (power-on hours) Class A Room _______250,000 MTBF (power-on hours) Office _____________150,000 POWER DISSIPATION (watts/BTU) ____________ POWER REQUIREMENTS: Single-ended/Differential +12V START-UP (amps) _2.2/3.2 +12V TYPICAL (amps) __1.8/1.8 +5V TYPICAL (amps) ___2.1/2.4 TYPICAL (watts) ______32.1/33.6 MAXIMUM (watts) ______39.1/41.6 LANDING ZONE (cyl) _______________________AUTO PARK USER MANUAL PART NUMBER __________________83327460 REFERENCE MANUAL PART NUMBER _____________83327470 IBM AT DRIVE TYPE ________________________0 or NONE OTHER ____________________________________ ZBR = Zone Bit Recording = Variable sectors per track ** Already low-level formatted at the factory with six spare sectors per cylinder, one spare cylinders/unit, one system cylinder/unit, and one diagnostic cylinder/unit. Physical: Height (inches/mm): 3.25/82.6 Width (inches/mm): 5.75/146.1 Depth (inches/mm): 8.0/203 Weight (lbs/kg): 7.8/3.6 Seagate reserves the right to change, without notice, product offerings or specifications. (10/28/91)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-41601N (97501-16G) Elite-1 FH SCSI-2 Fast ÚÄ This T-RES only on Differential model ³ (see below for T-RES descriptions) Spindle Sync ¿ ³ ÚÄ Terminator Power Source (see below)ÄÄ¿ Ú4ÄÄ1ÄÄ¿ ÚÄÄ*ÄÄÄ1 4o³o3 ÚÄÄÄÄÄÄ1 ³ p³o oo A ÀijÄÄÄÄÙ 2o o1 ÀÄijÄÄÄÙ ³ o o o o o n³o oo B ÀTerminator DIPSÙ Power o o o o ³ o o o o o ÀÄÄÄÄÄÄÙÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ Ú12ÄGÄGÄ5Ä¿ o o o o ³ ÍØÍØÍØÍØÍØÍÍPÍWÍAÍÍ͵::::::::::::::::::::::::1ÆÍ͵ 0 0 0 0 ÆÍØÍØÍØÍØÍÍ ³ 4 2 1 ³ ³ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; \ÄÄÄÄÄÄÄÄÄ/ ³ ³ ³ ³ ³ ÄÄÂÄÄ ³ ³ SCSI Cable Connector ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ÀÄÄ Master off/Slave on - Spindle Sync ³ ³ ³ ³ ³ ³ ÀÄÄÄÄ Write Protect option enable ³ ³ ³ ³ ³ ÀÄÄÄÄÄÄÄÄ SCSI ID ³ ³ ³ ³ ³ Spinup Delay (10 secs * ID) ÄÙ ³ ³ ³ ³ Motor Start option enable ÄÄÄÙ ³ ³ ³ Parity check DISable ÄÄÄÄÄÙ ³ ³ Sweep Cycle enable ÄÄÄÄÄÄÄÙ ³ ³ ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ ³ ³ Terminator Power Source Options ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ 2 & 4 Ä Initiator supplies power over the SCSI Bus for terminators. ³ ³ Drive supplies no terminator power. ³ ³ 1 & 2 Ä Drive supplies power for its own terminator resistor-paks ³ ³ but not to SCSI Bus. This is the factory setting. ³ ³ 1 & 3 ³ ³ AND Ä Drive supplies power for external terminator at end of the ³ ³ 2 & 4 daisy chain. Terminator resistor-paks must be removed. ³ ³ This option is recommended only for last drive on daisy ³ ³ chain. ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ T-RES descriptions: ST41600N 1 DIP ST41601N 2 SIPs ST41600ND 2 DIPs ST41601ND 2 DIPs ST-41601N Elite-1 FH UNFORMATTED CAPACITY ____ ________________1,600,930,800 FORMATTED CAPACITY (xx SECTORS) ____ _____1,370,545,152 ** AVERAGE SECTORS PER TRACK (with spares)___74.945 ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS/USER ______________________________35,717/35,666 CYLINDERS/USER ___________________________2,101/2,098 HEADS ____________________________________17 DISCS ____________________________________10 MEDIA TYPE _______________________________THIN FILM HEAD TYPE ________________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (2,7) INTERNAL TRANSFER RATE (mbits/sec) _______26 to 36 EXTERNAL TRANSFER RATE (mbytes/sec) ______10 SPINDLE SPEED (RPM) ______________________5,400 AVERAGE LATENCY (mSEC) ___________________5.56 COMMAND OVERHEAD (msec) __________________<0.5 BUFFER ___________________________________256 Kbyte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 Fast BYTES PER TRACK __________________________36,120 to 50,400 SECTORS PER DRIVE ________________________2,676,846 TPI (TRACKS PER INCH) ____________________ BPI (BITS PER INCH) ______________________ AREAL DENSITY ____________________________ AVERAGE ACCESS (ms) ______________________11.5 SINGLE TRACK SEEK (ms) ___________________1.7 MAX FULL SEEK (ms) _______________________22.5 MTBF (power-on hours) Class A Room _______250,000 MTBF (power-on hours) Office _____________150,000 POWER DISSIPATION (watts/BTU) ____________ POWER REQUIREMENTS: Single-ended/Differential +12V START-UP (amps) _2.2/3.2 +12V TYPICAL (amps) __1.8/1.8 +5V TYPICAL (amps) ___2.1/2.4 TYPICAL (watts) ______32.1/33.6 MAXIMUM (watts) ______39.1/41.6 LANDING ZONE (cyl) _______________________AUTO PARK USER MANUAL PART NUMBER __________________83327460 REFERENCE MANUAL PART NUMBER _____________83327470 IBM AT DRIVE TYPE ________________________0 or NONE OTHER ____________________________________ ZBR = Zone Bit Recording = Variable sectors per track ** Already low-level formatted at the factory with six spare sectors per cylinder, one spare cylinders/unit, one system cylinder/unit, and one diagnostic cylinder/unit. Physical: Height (inches/mm): 3.25/82.6 Width (inches/mm): 5.75/146.1 Depth (inches/mm): 8.0/203 Weight (lbs/kg): 7.8/3.6 Seagate reserves the right to change, without notice, product offerings or specifications. (08/08/94) SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-41650N Wren 8 FH SCSI-2 20-pin configuration jumper-block version Ú Synchronous Spindles option DC ³ Power ³ ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ /ÄÄÄÄÄÄÄÄÄ\ ÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍ͵:SCSI:Cable:::::::::::::::::1Æ͵ 0 0 0 0 ÆÍÍ ÚÄ¿ ÚÄÁÄ¿ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÀÄ5ÄGÄGÄ12Ù ³o³o o o o o o o³o+o³ ÚÄÄÄÄÄÄ1 ÚÄÄÄÄÄÄ1 ÚÄÄÄÄÄÄ1 ÅoÅo o o o o o o³o-o³ ÀÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÙ À1Ù 4 2 1 ÀÄÄÄÙ Terminator SIPS ³ ³ ÄÄÂÄÄ ³ ³ ³ ³ ³ ³ ³ ³ ÀÄ Motor Start Delay (16 secs * ID) ³ ³ ³ ³ ÀÄÄÄ Parity check enable ³ ³ ³ ÀÄÄÄÄÄ Motor Start option enable ³ ³ ÀÄÄÄÄÄÄÄÄÄ Drive ID's, ID 0 (none) if only SCSI device ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄ Terminator power to the Bus (vertical) ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅ Terminator power from Drive, default (vertical) ³ Terminator power from Bus (lower horizontal) 16-pin configuration jumper-block version Ú Synchronous Spindles option DC ³ Power ³ ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ /ÄÄÄÄÄÄÄÄÄ\ ÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍ͵:SCSI:Cable:::::::::::::::::1Æ͵ 0 0 0 0 ÆÍÍ ÚÄÁÄ¿ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÀÄ5ÄGÄGÄ12Ù ³o+o³o o o o o o ÚÄÄÄÄÄÄ1 ÚÄÄÄÄÄÄ1 ÚÄÄÄÄÄÄ1 ÚÄ¿ ³o-o³o o o o o o ÀÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÙ ³o³o À1ÄÄÙ4 2 1 M P Terminator SIPS ÅoÅoÄ¿ ÄÄÂÄÄ ³ ³ ³ ÀÅÙ³ ³ ³ ³ ³ ÀÄ Motor Start Delay (16 secs * ID) ³ ³ ³ ³ ³ ÀÄÄÄ Parity check enable ³ ³ ³ ³ ÀÄÄÄÄÄ Motor Start option enable ³ ³ ³ ÀÄÄÄÄÄÄÄÄÄ Drive ID's, ID 0 (none) if ³ ³ ³ only SCSI device ³ ³ ³ ³ ³ ³ Terminator power from Drive, default (vertical) ÄÄÙ ³ ³ Terminator power to the Bus (vertical) ÄÄÄÄÙ ³ Terminator power from Bus (lower horizontal) ÄÄÄÄÄÄÙ Both versions: LED ÚÄÄÄ¿ (Viewed from front of drive) Ú GND ³ 0 ³ ³ ÍÍÍÍÏÍÍÍÏÍÍÍÍÍÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍØÍÍÍÍÍÍÍÍÍÍÍÍ o o o J6 pin-1 (+5v) ----o o o ³ ³ ³ Remote LED connection ÄÄÙ ³ ³ Write Protect Remote ÅÄÄÄÙ ³ Switch cable connection ³ ³ Factory Use Only ÄÄÄÄÄÄÙ ST-41650N WREN 8 FH UNFORMATTED CAPACITY (MB) ________________1,650 FORMATTED CAPACITY (xx SECTORS) (MB) _____1,415 AVERAGE SECTORS PER TRACK (with spares)___87 ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________31,605 CYLINDERS ________________________________2,107 HEADS ____________________________________15 DISCS ____________________________________8 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec) _______17 to 32 SPINDLE SPEED (RPM) ______________________3,600 AVERAGE LATENCY (mSEC) ___________________8.33 BUFFER ___________________________________256 Kbyte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 BYTES PER TRACK __________________________54,900 avg. TPI (TRACKS PER INCH) ____________________1,760 BPI (BITS PER INCH) ______________________ AVERAGE ACCESS (ms) ______________________15 SINGLE TRACK SEEK (ms) ___________________2.5 MAX FULL SEEK (ms) _______________________34 MTBF (power-on hours) ____________________150,000 POWER REQUIREMENTS: +12V START-UP (amps) _4.5 +12V TYPICAL (amps) __1.5 +5V START-UP (amps) __0.8 +5V TYPICAL (amps) ___0.6 TYPICAL (watts) ______21 MAXIMUM (watts) ______58 BUFFERED STEP PULSE RATE (micro sec) _____ WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Already low-level formatted at the factory with one spare sector per track and two spare cylinders/unit. Seagate reserves the right to change, without notice, product offerings or specifications. (6/26/90)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-41651N Wren 8 FH SCSI-2 Fast 20-pin (2x10) configuration jumper-block version Ú Synchronous Spindles option DC ³ Power ³ ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ /ÄÄÄÄÄÄÄÄÄ\ ÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍ͵:SCSI:Cable:::::::::::::::::1Æ͵ 0 0 0 0 ÆÍÍ ÚÄ¿ ÚÄÁÄ¿ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÀÄ5ÄGÄGÄ12Ù ³o³o o o o o o o³o o³ ÚÄÄÄÄÄÄ1 ÚÄÄÄÄÄÄ1 ÚÄÄÄÄÄÄ1 ÅoÅo o o o o o o³o o³ ÀÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÙ ÀÄÙ 4 2 1 ÀÄÄÄÙ Terminator SIPS ³ ³ ÄÄÂÄÄ ³ ³ ³ ³ ³ ³ ³ ³ ÀÄ Motor Start Delay (16 secs * ID) ³ ³ ³ ³ ÀÄÄÄ Parity check enable ³ ³ ³ ÀÄÄÄÄÄ Motor Start option enable ³ ³ ÀÄÄÄÄÄÄÄÄÄ Drive ID's, ID 0 (none) if only SCSI device ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄ Terminator power to the Bus (vertical) ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅ Terminator power from Drive, default (vertical) ³ Terminator power from Bus (lower horizontal) 16-pin (2x8) configuration jumper-block version Ú Synchronous Spindles option DC ³ Power ³ ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ /ÄÄÄÄÄÄÄÄÄ\ ÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍ͵:SCSI:Cable:::::::::::::::::1Æ͵ 0 0 0 0 ÆÍÍ ÚÄÁÄ¿ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÀÄ5ÄGÄGÄ12Ù ³o o³o o o o o o ÚÄÄÄÄÄÄ1 ÚÄÄÄÄÄÄ1 ÚÄÄÄÄÄÄ1 ÚÄ¿ ³o o³o o o o o o ÀÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÙ ³o³o À1ÄÄÙ4 2 1 M P Terminator SIPS ÅoÅoÄ¿ ÄÄÂÄÄ ³ ³ ³ ÀÅÙ³ ³ ³ ³ ³ ÀÄ Motor Start Delay (16 secs * ID) ³ ³ ³ ³ ³ ÀÄÄÄ Parity check enable ³ ³ ³ ³ ÀÄÄÄÄÄ Motor Start option enable ³ ³ ³ ÀÄÄÄÄÄÄÄÄÄ Drive ID's, ID 0 (none) if ³ ³ ³ only SCSI device ³ ³ ³ ³ ³ ³ Terminator power from Drive, default (vertical) ÄÄÙ ³ ³ Terminator power to the Bus (vertical) ÄÄÄÄÙ ³ Terminator power from Bus (lower horizontal) ÄÄÄÄÄÄÙ Both versions: LED ÚÄÄÄ¿ (Viewed from front of drive) Ú GND ³ 0 ³ ³ ÍÍÍÍÏÍÍÍÏÍÍÍÍÍÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍØÍÍÍÍÍÍÍÍÍÍÍÍ o o o J6 pin-1 (+5v) ----o o o ³ ³ ³ Remote LED connection ÄÄÙ ³ ³ Write Protect Remote ÅÄÄÄÙ ³ Switch cable connection ³ ³ Factory Use Only ÄÄÄÄÄÄÙ ST-41651N WREN 8 FH UNFORMATTED CAPACITY (MB) ________________1,650 FORMATTED CAPACITY (xx SECTORS) (MB) _____1,415* AVERAGE SECTORS PER TRACK (with spares)___87 ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________31,605 CYLINDERS ________________________________2,107 (user) HEADS ____________________________________15 DISCS (5.25 in) __________________________8 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec) _______17 to 32 EXTERNAL TRANSFER RATE (Mbytes/sec) ______10.0 Sync. SPINDLE SPEED (RPM) ______________________3,600 AVERAGE LATENCY (mSEC) ___________________8.33 BUFFER ___________________________________256 Kbyte Read Look-Ahead, Adaptive, Multi- Segmented Cache INTERFACE ________________________________SCSI-2 Fast BYTES PER TRACK __________________________54,900 avg. SECTORS PER DRIVE ________________________2,749,635 TPI (TRACKS PER INCH) ____________________1,760 BPI (BITS PER INCH) ______________________ AVERAGE ACCESS (ms) ______________________15 SINGLE TRACK SEEK (ms) ___________________2.5 MAX FULL SEEK (ms) _______________________34 MTBF (power-on hours) ____________________150,000 POWER REQUIREMENTS: +12V START-UP (amps) _4.5 +12V TYPICAL (amps) __1.5 +5V START-UP (amps) __0.8 +5V TYPICAL (amps) ___0.6 TYPICAL (watts) ______21 MAXIMUM (watts) ______58 WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE * Already low-level formatted at the factory with one spare sector per track and two spare cylinders/unit. Seagate reserves the right to change, without notice, product offerings or specifications. (10/31/91)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-42000N Elite 2 Fast SCSI-2 ÚÄ This T-RES only on Differential model ³ (see below for T-RES descriptions) Spindle Sync ¿ ³ ÚÄ Terminator Power Source (see below)ÄÄ¿ Ú4ÄÄ1ÄÄ¿ ÚÄÄ*ÄÄÄ1 4o³o3 ÚÄÄÄÄÄÄ1 ³ p³o oo A ÀijÄÄÄÄÙ 2o o1 ÀÄijÄÄÄÙ ³ o o o o o n³o oo B ÀTerminator DIPSÙ Power o o o o ³ o o o o o ÀÄÄÄÄÄÄÙÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ Ú12ÄGÄGÄ5Ä¿ o o o o ³ ÍØÍØÍØÍØÍØÍÍPÍWÍAÍÍ͵::::::::::::::::::::::::1ÆÍ͵ 0 0 0 0 ÆÍØÍØÍØÍØÍÍ ³ 4 2 1 ³ ³ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; \ÄÄÄÄÄÄÄÄÄ/ ³ ³ ³ ³ ³ ÄÄÂÄÄ ³ ³ SCSI Cable Connector ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ÀÄÄ Master off/Slave on - Spindle Sync ³ ³ ³ ³ ³ ³ ÀÄÄÄÄ Write Protect option enable ³ ³ ³ ³ ³ ÀÄÄÄÄÄÄÄÄ SCSI ID ³ ³ ³ ³ ³ Spinup Delay (10 secs * ID) ÄÙ ³ ³ ³ ³ Motor Start option enable ÄÄÄÙ ³ ³ ³ Parity check DISable ÄÄÄÄÄÙ ³ ³ Sweep Cycle enable ÄÄÄÄÄÄÄÙ ³ ³ ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ ³ ³ Terminator Power Source Options ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ 2 & 4 Ä Initiator supplies power over the SCSI Bus for terminators. ³ ³ Drive supplies no terminator power. ³ ³ 1 & 2 Ä Drive supplies power for its own terminator resistor-paks ³ ³ but not to SCSI Bus. This is the factory setting. ³ ³ 1 & 3 ³ ³ AND Ä Drive supplies power fpr external terminator at end of the ³ ³ 2 & 4 daisy chain. Terminator resistor-paks must be removed. ³ ³ This option is recommended only for last drive on daisy ³ ³ chain. ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ T-RES descriptions: ST42000N 2 SIPs ST42000ND 2 DIPs ST-42000N Elite 2 UNFORMATTED CAPACITY _____________________2,106,263,040 FORMATTED CAPACITY (512 byte blk) ________1,792,111,616 AVERAGE SECTORS PER TRACK ________________83 ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________41,984 CYLINDERS ________________________________2,627/2,624 (user) HEADS ____________________________________16 DISCS (5.25 in) __________________________9 MEDIA TYPE _______________________________THIN FILM HEAD TYPE ________________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (2,7) INTERNAL TRANSFER RATE (mbits/sec) _______30-40 EXTERNAL TRANSFER RATE (mbyte/sec) _______10 (burst) SPINDLE SPEED (RPM) ______________________5,400 AVERAGE LATENCY (mSEC) ___________________5.55 COMMAND OVERHEAD (mSEC) __________________<0.5 BUFFER ___________________________________256 Kbyte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 FAST BYTES PER TRACK __________________________42,000-55,440 SECTORS PER DRIVE ________________________3,500,218 BYTES PER CYLINDER _______________________672,000-887,040 TPI (TRACKS PER INCH) ____________________2,250 BPI (BITS PER INCH) ______________________41,713 AVERAGE ACCESS (ms) ______________________11 SINGLE TRACK SEEK (ms) ___________________1.7 MAX FULL SEEK (ms) _______________________22.5 MTBF (power-on hours) Class A Room _______250,000 MTBF (power-on hours) Office _____________150,000 POWER REQUIREMENTS: Single ended/Differential +12V START-UP (amps) _4.6/4.6 +12V TYPICAL (amps) __2.0/2.0 +5V START-UP (amps) __2.3/2.6 +5V TYPICAL (amps) ___2.3/2.6 TYPICAL (watts) ______29.9/31.8 MAXIMUM (watts) ______33.7/36.6 WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________Auto USER MANUAL PART NUMBER __________________ OTHER ____________________________________ Synchronized Spindles, Sweep Cycle Capability ZBR = Zone Bit Recording = Variable sectors per track ** Already low-level formatted at the factory with six spare sectors per cylinder, one spare cylinders/unit, one system cylinder/unit, and one diagnostic cylinder/unit. Physical: Height (inches/mm): 3.25/82.6 Width (inches/mm): 5.75/146.1 Depth (inches/mm): 8.0/203 Weight (lbs/kg): 7.8/3.6 Seagate reserves the right to change, without notice, product offerings or specifications. (12/14/92)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-42100N Wren 9 FH SCSI-2 Fast Ú Synchronous Spindles option DC ³ Power ³ ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ /ÄÄÄÄÄÄÄÄÄ\ ÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍ͵:SCSI:Cable:::::::::::::::::1Æ͵ 0 0 0 0 ÆÍÍ ÚÄ¿ ÚÄÁÄ¿ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÀÄ5ÄGÄGÄ12Ù ³o³o o o o o o o³o+o³ ÚÄÄÄÄÄÄ1 ÚÄÄÄÄÄÄ1 ÚÄÄÄÄÄÄ1 ÅoÅo o o o o o o³o-o³ ÀÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÙ À1Ù 4 2 1 ÀÄÄÄÙ Terminator SIPS ³ ³ ÄÄÂÄÄ ³ ³ ³ ³ ³ ³ ³ ³ ÀÄ Motor Start Delay (16 secs * ID) ³ ³ ³ ³ ÀÄÄÄ Parity check enable ³ ³ ³ ÀÄÄÄÄÄ Motor Start option enable ³ ³ ÀÄÄÄÄÄÄÄÄÄ Drive ID's, ID 0 (none) if only SCSI device ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄ Terminator power to the Bus (vertical) ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅ Terminator power from Drive, default (vertical) ³ Terminator power from Bus (lower horizontal) LED ÚÄÄÄ¿ (Viewed from front of drive) Ú GND ³ 0 ³ ³ ÍÍÍÍÏÍÍÍÏÍÍÍÍÍÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍØÍÍÍÍÍÍÍÍÍÍÍÍ o o o J6 pin-1 (+5v) ----o o o ³ ³ ³ Remote LED connection ÄÄÙ ³ ³ Write Protect Remote ÅÄÄÄÙ ³ Switch cable connection ³ ³ Factory Use Only ÄÄÄÄÄÄÙ ST-42100N WREN 9 FH UNFORMATTED CAPACITY (MB) ________________2,200 FORMATTED CAPACITY (xx SECTORS) (MB) _____1,900* AVERAGE SECTORS PER TRACK (with spares)___96 ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________38,595 CYLINDERS ________________________________2,573 (user) HEADS ____________________________________15 DISCS (5.25 inch) ________________________8 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec) _______20 to 31 EXTERNAL TRANSFER RATE (Mbytes/sec) ______10.0 Sync. SPINDLE SPEED (RPM) ______________________3,600 AVERAGE LATENCY (mSEC) ___________________8.33 BUFFER ___________________________________256 Kbyte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 Fast BYTES PER TRACK __________________________57,200 avg. SECTORS PER DRIVE ________________________3,705,120 TPI (TRACKS PER INCH) ____________________2,150 BPI (BITS PER INCH) ______________________ AVERAGE ACCESS (ms) ______________________12.95 SINGLE TRACK SEEK (ms) ___________________2 MAX FULL SEEK (ms) _______________________29 MTBF (power-on hours) ____________________150,000 POWER REQUIREMENTS: +12V START-UP (amps) _4.5 +12V TYPICAL (amps) __1.5 +5V START-UP (amps) __0.8 +5V TYPICAL (amps) ___0.6 TYPICAL (watts) ______21 MAXIMUM (watts) ______58 LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE * 512 bytes per sector, one spare sector per track, two spare cylinders per unit. Already low-level formatted at the factory. Seagate reserves the right to change, without notice, product offerings or specifications. (10/31/91)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-42101N Wren 9 FH SCSI-2 Fast Wide Ú Synchronous Spindles option DC ³ Power ³ ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ /ÄÄÄÄÄÄÄÄÄ\ ÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍ͵:SCSI:Cable:::::::::::::::::1Æ͵ 0 0 0 0 ÆÍÍ ÚÄ¿ ÚÄÁÄ¿ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ÀÄ5ÄGÄGÄ12Ù ³o³o o o o o o o³o+o³ ÚÄÄÄÄÄÄ1 ÚÄÄÄÄÄÄ1 ÚÄÄÄÄÄÄ1 ÅoÅo o o o o o o³o-o³ ÀÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÙ ÀÄÄÄÄÄÄÙ À1Ù 4 2 1 ÀÄÄÄÙ Terminator SIPS ³ ³ ÄÄÂÄÄ ³ ³ ³ ³ ³ ³ ³ ³ ÀÄ Motor Start Delay (16 secs * ID) ³ ³ ³ ³ ÀÄÄÄ Parity check enable ³ ³ ³ ÀÄÄÄÄÄ Motor Start option enable ³ ³ ÀÄÄÄÄÄÄÄÄÄ Drive ID's, ID 0 (none) if only SCSI device ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄ Terminator power to the Bus (vertical) ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅ Terminator power from Drive, default (vertical) ³ Terminator power from Bus (lower horizontal) LED ÚÄÄÄ¿ (Viewed from front of drive) Ú GND ³ 0 ³ ³ ÍÍÍÍÏÍÍÍÏÍÍÍÍÍÍÍÍÍÍÍÍÍPÍWÍAÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍØÍÍÍÍÍÍÍÍÍÍÍÍ o o o J6 pin-1 (+5v) ----o o o ³ ³ ³ Remote LED connection ÄÄÙ ³ ³ Write Protect Remote ÅÄÄÄÙ ³ Switch cable connection ³ ³ Factory Use Only ÄÄÄÄÄÄÙ ST-42100N WREN 9 FH UNFORMATTED CAPACITY (MB) ________________2,200 FORMATTED CAPACITY (xx SECTORS) (MB) _____1,900 AVERAGE SECTORS PER TRACK (with spares)___96 ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________38,595 CYLINDERS ________________________________2,573 HEADS ____________________________________15 DISCS (5.25 in) __________________________8 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec) _______20 to 31 EXTERNAL TRANSFER RATE (Mbytes/sec) ______20.0 Sync. (16 bit) SPINDLE SPEED (RPM) ______________________3,600 AVERAGE LATENCY (mSEC) ___________________8.33 BUFFER ___________________________________256 Kbyte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 Fast Wide SECTORS PER DRIVE ________________________3,705,120 TPI (TRACKS PER INCH) ____________________2,150 BPI (BITS PER INCH) ______________________ AVERAGE ACCESS (ms) ______________________12.95 SINGLE TRACK SEEK (ms) ___________________2 MAX FULL SEEK (ms) _______________________29 MTBF (power-on hours) ____________________150,000 POWER REQUIREMENTS: +12V START-UP (amps) _4.5 +12V TYPICAL (amps) __1.5 +5V START-UP (amps) __0.8 +5V TYPICAL (amps) ___0.6 TYPICAL (watts) ______23 MAXIMUM (watts) ______ LANDING ZONE (cyl) _______________________AUTO PARK IBM AT DRIVE TYPE ________________________0 or NONE Already low-level formatted at the factory with one spare sector per track and two spare cylinders/unit. Seagate reserves the right to change, without notice, product offerings or specifications. (10/31/91)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-42400N Elite 2 Fast SCSI-2 ÚÄ This T-RES only on Differential model Spindle Sync ¿ ³ ÚÄ Terminator Power Source (see below)ÄÄ¿ Ú4ÄÄ1ÄÄ¿ ÚÄÄ*ÄÄÄ1 4o³o3 ÚÄÄÄÄÄÄ1 ³ ³o oo A ÀijÄÄÄÄÙ 2o o1 ÀÄijÄÄÄÙ ³ o o o o o ³o oo B ÀTerminator DIPSÙ Power o o o o ³ o o o o o ÀÄÄÄÄÄÄÙÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ Ú12ÄGÄGÄ5Ä¿ o o o o ³ ÍØÍØÍØÍØÍØÍÍPÍWÍAÍÍ͵::::::::::::::::::::::::1ÆÍ͵ 0 0 0 0 ÆÍØÍØÍØÍØÍÍ ³ 4 2 1 ³ ³ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; \ÄÄÄÄÄÄÄÄÄ/ ³ ³ ³ ³ ³ ÄÄÂÄÄ ³ ³ SCSI Cable Connector ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ÀÄÄ Master off/Slave on - Spindle Sync ³ ³ ³ ³ ³ ³ ÀÄÄÄÄ Write Protect option enable ³ ³ ³ ³ ³ ÀÄÄÄÄÄÄÄÄ SCSI ID ³ ³ ³ ³ ³ Spinup Delay (10 secs * ID) ÄÙ ³ ³ ³ ³ Motor Start option enable ÄÄÄÙ ³ ³ ³ Parity check DISable ÄÄÄÄÄÙ ³ ³ Sweep Cycle enable ÄÄÄÄÄÄÄÙ ³ ³ ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ ³ ³ Terminator Power Source Options ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ 2 & 4 Ä Initiator supplies power over the SCSI Bus for terminators. ³ ³ Drive supplies no terminator power. ³ ³ 1 & 2 Ä Drive supplies power for its own terminator resistor-paks ³ ³ but not to SCSI Bus. This is the factory setting. ³ ³ 1 & 3 ³ ³ AND Ä Drive supplies power for external terminator at end of the ³ ³ 2 & 4 daisy chain. Terminator resistor-paks must be removed. ³ ³ This option is recommended only for last drive on daisy ³ ³ chain. ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ST-42400N Elite 2 UNFORMATTED CAPACITY _____________________2,501,187,360 FORMATTED CAPACITY (512 byte blk) ________2,129,644,544 AVERAGE SECTORS PER TRACK ________________83 ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________49,913 CYLINDERS ________________________________2,627/2,624 (user) HEADS ____________________________________19 DISCS (5.25 in) __________________________11 MEDIA TYPE _______________________________THIN FILM HEAD TYPE ________________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (2,7) INTERNAL TRANSFER RATE (mbits/sec) _______30-40 EXTERNAL TRANSFER RATE (mbyte/sec) _______10 (burst) SPINDLE SPEED (RPM) ______________________5,400 AVERAGE LATENCY (mSEC) ___________________5.55 COMMAND OVERHEAD (mSEC) __________________<0.5 BUFFER ___________________________________256 Kbyte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 FAST BYTES PER TRACK __________________________42,000-55,440 SECTORS PER DRIVE ________________________4,159,462 BYTES PER CYLINDER _______________________798,000-1,053,360 TPI (TRACKS PER INCH) ____________________2,250 BPI (BITS PER INCH) ______________________41,713 AVERAGE ACCESS (ms) ______________________11 SINGLE TRACK SEEK (ms) ___________________1.7 MAX FULL SEEK (ms) _______________________22.5 MTBF (power-on hours) Class A Room _______250,000 MTBF (power-on hours) Office _____________150,000 POWER DISSIPATION (watts) ________________33 POWER REQUIREMENTS: +12V START-UP (amps) _ +12V TYPICAL (amps) __ +5V START-UP (amps) __ +5V TYPICAL (amps) ___ TYPICAL (watts) ______33 IDLE (watts) _________30 WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl) _______________________Auto USER MANUAL PART NUMBER __________________ OTHER ____________________________________ Synchronized Spindles, Sweep Cycle Capability ZBR = Zone Bit Recording = Variable sectors per track ** Already low-level formatted at the factory with six spare sectors per cylinder, one spare cylinders/unit, one system cylinder/unit, and one diagnostic cylinder/unit. Physical: Height (inches/mm): 3.25/82.6 Width (inches/mm): 5.75/146.1 Depth (inches/mm): 8.0/203 Weight (lbs/kg): 7.8/3.6 Seagate reserves the right to change, without notice, product offerings or specifications. (12/14/92)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-43400N Elite 3 Fast SCSI-2 ÚÄ This T-RES only on Differential model ³ (see below for T-RES descriptions) Spindle Sync ¿ ³ ÚÄ Terminator Power Source (see below)ÄÄ¿ Ú4ÄÄ1ÄÄ¿ ÚÄÄ*ÄÄÄ1 4o³o3 ÚÄÄÄÄÄÄ1 ³ p³o oo A ÀijÄÄÄÄÙ 2o o1 ÀÄijÄÄÄÙ ³ o o o o o n³o oo B ÀTerminator DIPSÙ Power o o o o ³ o o o o o ÀÄÄÄÄÄÄÙÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ Ú12ÄGÄGÄ5Ä¿ o o o o ³ ÍØÍØÍØÍØÍØÍÍPÍWÍAÍÍ͵::::::::::::::::::::::::1ÆÍ͵ 0 0 0 0 ÆÍØÍØÍØÍØÍÍ ³ 4 2 1 ³ ³ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; \ÄÄÄÄÄÄÄÄÄ/ ³ ³ ³ ³ ³ ÄÄÂÄÄ ³ ³ SCSI Cable Connector ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ÀÄÄ Master off/Slave on - Spindle Sync ³ ³ ³ ³ ³ ³ ÀÄÄÄÄ Write Protect option enable ³ ³ ³ ³ ³ ÀÄÄÄÄÄÄÄÄ SCSI ID ³ ³ ³ ³ ³ Spinup Delay (10 secs * ID) ÄÙ ³ ³ ³ ³ Motor Start option enable ÄÄÄÙ ³ ³ ³ Parity check DISable ÄÄÄÄÄÙ ³ ³ Sweep Cycle enable ÄÄÄÄÄÄÄÙ ³ ³ ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ ³ ³ Terminator Power Source Options ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ 2 & 4 Ä Initiator supplies power over the SCSI Bus for terminators. ³ ³ Drive supplies no terminator power. ³ ³ 1 & 2 Ä Drive supplies power for its own terminator resistor-paks ³ ³ but not to SCSI Bus. This is the factory setting. ³ ³ 1 & 3 ³ ³ AND Ä Drive supplies power for external terminator at end of the ³ ³ 2 & 4 daisy chain. Terminator resistor-paks must be removed. ³ ³ This option is recommended only for last drive on daisy ³ ³ chain. ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ T-RES descriptions: ST43400N 2 SIPs ST43400ND 2 DIPs ST-43400N Elite 3 UNFORMATTED CAPACITY _____________________3,554,871,600 FORMATTED CAPACITY (512 byte blk) ________2,912,484,864 AVERAGE SECTORS PER TRACK ________________99 (rounded down) ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________57,435 CYLINDERS ________________________________2,738/2,735 (user) HEADS ____________________________________21 DISCS (5.25 in) __________________________11 MEDIA TYPE _______________________________THIN FILM HEAD TYPE ________________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec) _______35-52 INTERNAL TRANSFER RATE AVG (mbyte/sec) ___6.0 EXTERNAL TRANSFER RATE (mbyte/sec) _______10 (burst) SPINDLE SPEED (RPM) ______________________5,400 AVERAGE LATENCY (mSEC) ___________________5.55 COMMAND OVERHEAD (mSEC) __________________<0.5 BUFFER ___________________________________512 Kbyte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 FAST BYTES PER TRACK __________________________49,000-72,800 SECTORS PER DRIVE ________________________5,696,655 BYTES PER CYLINDER _______________________1,058,400 to 1,587,600 TPI (TRACKS PER INCH) ____________________ BPI (BITS PER INCH) ______________________ AVERAGE ACCESS (ms) read/write ___________10/11 SINGLE TRACK SEEK (ms) read/write ________0.9/1.7 MAX FULL SEEK (ms) read/write ____________22.5/23.5 MTBF (power-on hours) Class A Room _______300,000 MTBF (power-on hours) Office _____________200,000 POWER DISSIPATION (watts) ________________ POWER REQUIREMENTS: Single-ended/Differential +12V START-UP (amps) _3.98/4.60 +12V TYPICAL (amps) __1.90/1.88 +5V START-UP (amps) __2.37/3.48 +5V TYPICAL (amps) ___1.96/2.77 TYPICAL ( watts seek/read)_32.60/36.41 IDLE (watts) ______________28.34/31.81 USER MANUAL PART NUMBER __________________83327630 OTHER ____________________________________ Synchronized Spindles, Sweep Cycle Capability ** Already low-level formatted at the factory with six spare sectors per cylinder, one spare cylinders/unit, one system cylinder/unit, and one diagnostic cylinder/unit. Physical: Height (inches/mm): 3.25/82.6 Width (inches/mm): 5.75/146.1 Depth (inches/mm): 8.0/203 Weight (lbs/kg): 7.8/3.6 Seagate reserves the right to change, without notice, product offerings or specifications. (12/14/92)  SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1993 ST-43401N/ND Elite 3 SCSI-2 Fast Wide ÚÄÄÄÄÄÄ Write Protect option enable ³ ÚÄÄÄ Not used ³ ³ ÚÄ Master off/Slave on - Spindle Sync ³ ³ ³ ÚÄÄÄÄÄÄÄÄÄ Terminator Power Source (see below)ÄÄ¿ ³ ³ ³J4A ³ Ú Terminators (SIP on single, ³ ÚÅ Ú´ Å¿ J01³ ³ DIP on differential) ³ ³o oo o³ J7 ÚÄijÄÄ¿ ÃÄÄÄÄÄÂÄÄÄÄÄ¿ J4B ³ ³o oo o³o o o o o o-a-o-o³4o³o3³ÚÏÍÍÍ1ÚÍÍÍÍ1ÚÍÍÍÍ1 Power o o o o ³ ÀÄÄÄÄÄÄÙo o o o o o-b-o-o³2o o1³___________________ Ú12ÄGÄGÄ5Ä¿ o o o o ³ ÍPÍWÍAÍÍØÍØÍØÍØÍØͳÍ^ͳͳÏÍÍÍÍÍ( ×××××××××××××××××1)Í͵ 0 0 0 0 ÆÍØÍØÍØÍØÍÍ ³ 8 4 2 1 ³ ³ ³ ³ ³ \ÄÄÄÄÄÄÄÄÄÄÄijÄÄÄÄ/ \ÄÄÄÄÄÄÄÄÄ/ ³ ³ ³ ³ ³ ÄÄÄÄÂÄÄ ³ ³ ³ ³ SCSI Cable Connector ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ 68-pin ³ ³ ³ ³ ³ SCSI ID ÄÄÄÄÙ ³ ³ ³ ³ ³ ³ ³ ³ ³ Motor ÄÄÄÄÄÄÄÄÄÙ ³ ³ ³ ³ Spinup Delay (10 secs * ID) ÄÙ ³ ³ ³ ³ ÚGround ÄÄÄÄÄÄÄÄÄÄÙ ³ ³ Motor Start option enable ÄÄÄÙ ³ ³ ³ ³Key (no pin) ÄÄÄÄÄÄÙ ³ ³ Parity enable ÄÄÄÄÄÙ ³ ³ ³Spindle Sync (SSCLK-)Ù ³ Sweep Cycle enable ÄÄÄÄÄÄÄÙ ³ ÃSpindle Sync (SSCLK+)ÄÄÙ ³ ÀÄ port a and b (horizontal) ³ ³ ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ ³ ³ Terminator Power Source Options ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ 2 & 4 Ä Initiator supplies power over the SCSI Bus for terminators. ³ ³ Drive supplies no terminator power. ³ ³ 1 & 2 Ä Drive supplies power for its own terminator resistor-paks ³ ³ but not to SCSI Bus. This is the factory setting. ³ ³ 1 & 3 ³ ³ AND Ä Drive supplies power for external terminator at end of the ³ ³ 2 & 4 daisy chain. Terminator resistor-paks must be removed. ³ ³ This option is recommended only for last drive on daisy ³ ³ chain. ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ T-RES descriptions: ST43401N 3 SIPs ST43401ND 3 DIPs ST-43401N/ND Elite 3 UNFORMATTED CAPACITY _____________________3,554,871,600 FORMATTED CAPACITY (512 byte blk) ________2,912,484,864 AVERAGE SECTORS PER TRACK ________________99 (rounded down) ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________57,435 CYLINDERS ________________________________2,738/2,735 (user) HEADS ____________________________________21 DISCS (5.25 in) __________________________11 MEDIA TYPE _______________________________THIN FILM HEAD TYPE ________________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec) _______35-52 INTERNAL TRANSFER RATE AVG (mbyte/sec) ___6.0 EXTERNAL TRANSFER RATE (mbyte/sec) _______20 Sync. SPINDLE SPEED (RPM) ______________________5,400 AVERAGE LATENCY (mSEC) ___________________5.55 COMMAND OVERHEAD (mSEC) __________________<0.5 BUFFER ___________________________________512 Kbyte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 FAST Wide BYTES PER TRACK __________________________49,000-72,800 SECTORS PER DRIVE ________________________5,696,655 BYTES PER CYLINDER _______________________1,058,400 to 1,587,600 TPI (TRACKS PER INCH) ____________________ BPI (BITS PER INCH) ______________________ AVERAGE ACCESS (ms) read/write ___________10/11 SINGLE TRACK SEEK (ms) read/write ________0.9/1.7 MAX FULL SEEK (ms) read/write ____________22.5/23.5 MTBF (power-on hours) Class A Room _______300,000 MTBF (power-on hours) Office _____________200,000 POWER DISSIPATION (watts) ________________ POWER REQUIREMENTS: Single-ended/Differential +12V START-UP (amps) _3.98/4.60 +12V TYPICAL (amps) __1.90/1.88 +5V START-UP (amps) __2.37/3.48 +5V TYPICAL (amps) ___1.96/2.77 TYPICAL ( watts seek/read)_32.60/36.41 IDLE (watts) ______________28.34/31.81 USER MANUAL PART NUMBER __________________83327630 OTHER ____________________________________ Synchronized Spindles, Sweep Cycle Capability ** Already low-level formatted at the factory with six spare sectors per cylinder, one spare cylinders/unit, one system cylinder/unit, and one diagnostic cylinder/unit. Physical: Height (inches/mm): 3.25/82.6 Width (inches/mm): 5.75/146.1 Depth (inches/mm): 8.0/203 Weight (lbs/kg): 7.8/3.6 Seagate reserves the right to change, without notice, product offerings or specifications. (08/08/94) SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1993 ST-43402ND Dual Port Differential Fast Wide SCSI-2 ÚÄÄÄÄÄ Not used ³ ÚÄÄÄ Write Protect option enable ³ ³ ÚÄ Master off/Slave on - Spindle Sync ³ ³ ³ ÚÚÅ¿³Ä³¿J4A TOP ³oooo o³ ³oooo o³ o-a-o-o Power o o o o ÀÄÄÄÄÄÄÙ o-b-o-o Ú12ÄGÄGÄ5Ä¿ o o o o J4B ÍÍÍÍÍÍÍÍÍͳÍ^ͳͳÍÍÍÍPWAÍÍÍÍÍÍÍ͵ 0 0 0 0 ÆÍØÍØÍØÍØÍÍÍÍÍÍÍÍ ³ ³ ³ ³ \ÄÄÄÄÄÄÄÄÄ/ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ( \ ³ ³ ³ ³ Spinup Delay ³ ³ ³ ³ /) ³ÎÎ\ ³ ³ ³ (10 secs * ID) ÄÙ ³ ³ ³ /Îγ ³Îγ ³ ³ ³ ³ Motor Start ³ ³ ³ ³Îγ ³Îγ ³ ³ ³ option enable ÄÄÄÙ ³ ³ ³Îγ ³Îγ ³ ³ ³ ³ Parity Check disable ÄÄÄÄÄÙ ³ ³Îγ ³Îγ ³ ³ ³ Sweep Cycle enable ÄÄÄÄÄÄÄÙ ³Îγ ³Îγ ³ ³ ³ ³ ³Îγ ³ÎÎ/ ³ ³ ÀÄ Spindle Sync (SSCLK+) \Îγ ( / ³ ³ ÀÄÄÄ Spindle Sync (SSCLK-) \) Port B ³ ÀÄÄÄÄÄ Key (no pin) Port A ÀÄÄÄÄÄÄÄ Ground port a and b (horizontal) ÚÄÄÄÄÄÄÄÂÄÄÄÄ(top pin-2)Ä LED 4 ³ ÀÄ(bottom pin-1)Ä Manual Reset To activate J10 ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄ Write Protect enable LED features, pin ³ ³ ÀÄ Write Protect enable is grounded to ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄ Port B active LED external switch.³ ³ ³ ÀÄ SCSI ID 4 ³ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄ Port A active LED ³ ³ ³ ³ ÀÄ SCSI ID 2 ³ ³ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄ Ready LED ³ ³ ³ ³ ³ ÀÄ Self Test ³ ³ ³ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÂÄ LED 6 (n/a) ³ ³ ³ ³ ³ ³ ÀÄ Port B dictates Port A's ID ³ ³ ³ ³ ³ ³ ÚÄÄÄÄÄÄÄÄÄÄÂÄ Spinup Delay (10 secs * ID) ³ ³ ³ ³ ³ ³ ³ ÀÄ SCSI ID 1 ÍPWAÍÍÍÍÍÍ ³ ³ ³ ³ ³ ³ ³ ÚÄÄÄÄÄÄÄÄÂÄ Fault LED ³ ³ ³ ³ ³ ³ ³ ³ ÀÄ Motor Start Option enable ³ ³ ³ ³ ³ ³ ³ ³ ÚÄÄÄÄÄÄÂÄ Not assigned J01B ³ ³ ³ ³ ³ ³ ³ ³ ³ ÀÄ SCSI ID 8 ( \ ÚÄÄÄÄÄ¿ ³ ³ ³ ³ ³ ³ ³ ³ ³ ÚÄÄÄÄÄ¿ /) ³ÎÎ\ ³4o o3³ ³ ³ ³ ³ ³ ³ ³ ³ ³ J01A ³4o o3³ /Îγ ³Îγ ³2o³o1³ o o o o o o o o o ³2o³o1³ ³Îγ ³Îγ ³ 1 o o o o o o o o J10 ³ ³Îγ ³Îγ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³Îγ ³Îγ Úo ÚÄÄÄÄÄGNDÄÄÄÄÄÄÄ¿ ³ ³Îγ ³Îγ ÚÁo o o o o o o o o o ³ ³Îγ ³ÎÎ/ ³ o o 1 o o o o o o o o J9 ³ \Îγ ( / ³ ÀÂÙ 8 4 2 1 8 4 2 1 ³ ³ \) Port B ³ ³ ÀÄÄÄÂÄÙ ÀÄÄÄÂÄÙ ³ ³ Port A ³ ³ ³ ³ ³ ³ ³J3³ ³ ³ ÀÄ Port B dictates ³ Port A ÄÙ ³ ³ ³ Port A's ID ³ enable ³ ³ ÀÄÄÄÄÄ SCSI ID Port A ³ Port B ÄÄÄÄÙ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄ SCSI ID Port B ³ enable ³ ³ ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ ³ ³ Terminator Power Source Options J01A & J01B ÄÄÄÄÄÙ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ 2 & 4 Ä Initiator supplies power over the SCSI Bus for terminators. ³ ³ Drive supplies no terminator power. ³ ³ 1 & 2 Ä Drive supplies power for its own terminator resistor-paks ³ ³ but not to SCSI Bus. This is the factory setting. ³ ³ 1 & 3 ³ ³ AND Ä Drive supplies power for external terminator at end of the ³ ³ 2 & 4 daisy chain and supplies own terminator power. ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ST-43402ND does not come with any provision to use Termination resistors. Therefore, SCSI bus needs to be externally terminated. ST-43402ND Elite 3 UNFORMATTED CAPACITY _____________________3,554,871,600 FORMATTED CAPACITY (512 byte blk) ________2,912,484,864 AVERAGE SECTORS PER TRACK ________________99 (rounded down) ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________57,435 CYLINDERS ________________________________2,738/2,735 (user) HEADS ____________________________________21 DISCS (5.25 in) __________________________11 MEDIA TYPE _______________________________THIN FILM HEAD TYPE ________________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec) _______35-52 INTERNAL TRANSFER RATE AVG (mbyte/sec) ___6.0 EXTERNAL TRANSFER RATE (mbyte/sec) _______20 Sync SPINDLE SPEED (RPM) ______________________5,400 AVERAGE LATENCY (mSEC) ___________________5.55 COMMAND OVERHEAD (mSEC) __________________<0.5 BUFFER ___________________________________512 Kbyte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 FAST Wide Dual-Port BYTES PER TRACK __________________________49,000-72,800 SECTORS PER DRIVE ________________________5,696,655 BYTES PER CYLINDER _______________________1,058,400 to 1,587,600 TPI (TRACKS PER INCH) ____________________ BPI (BITS PER INCH) ______________________ AVERAGE ACCESS (ms) read/write ___________10/11 SINGLE TRACK SEEK (ms) read/write ________0.9/1.7 MAX FULL SEEK (ms) read/write ____________22.5/23.5 MTBF (power-on hours) Class A Room _______300,000 MTBF (power-on hours) Office _____________200,000 POWER DISSIPATION (watts) ________________ POWER REQUIREMENTS: Single-ended/Differential +12V START-UP (amps) _3.98/4.60 +12V TYPICAL (amps) __1.90/1.88 +5V START-UP (amps) __2.37/3.48 +5V TYPICAL (amps) ___1.96/2.77 TYPICAL ( watts seek/read)_32.60/36.41 IDLE (watts) ______________28.34/31.81 USER MANUAL PART NUMBER __________________83327630 OTHER ____________________________________ Synchronized Spindles, Sweep Cycle Capability ** Already low-level formatted at the factory with six spare sectors per cylinder, one spare cylinders/unit, one system cylinder/unit, and one diagnostic cylinder/unit. Physical: Height (inches/mm): 3.25/82.6 Width (inches/mm): 5.75/146.1 Depth (inches/mm): 8.0/203 Weight (lbs/kg): 7.8/3.6 Seagate reserves the right to change, without notice, product offerings or specifications. (08/08/94) SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1993 ST-410800N Elite 9 Fast SCSI-2 ÚÄ Terminator Power Source (see below)ÄÄ¿ 4o³o3 ³ J4A 2o o1 J4B ³ o o o o o o A R o o Power o o o o ³ o o o o o o g F o o ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ Ú12ÄGÄGÄ5Ä¿ o o o o ³ ÍØÍØÍØÍØÍØÍØÍÍØÍØÍØÍÍØ͵::::::::::::::::::::::::1Æ͵ 0 0 0 0 ÆÍØÍØÍØÍØÍÍ ³ ³ 4 2 1 ³ ³ ÃÄÙ ³ ³ ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; \ÄÄÄÄÄÄÄÄÄ/ ³ ³ ³ ³ ³ ³ ÄÄÂÄÄ ³ ³ ³ ³ ³ SCSI Cable Connector ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ÀÄÄ Spindle Synch Cable Connector ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ (top pin: SSREF, bottom: ground) ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ÀÄÄÄÄÄ Terminator Enable ³ ³ ³ ³ ³ ³ ³ ³ ³ ÀÄÄÄÄÄÄÄÄÄ LED Connection (g: ground pin) ³ ³ ³ ³ ³ ³ ³ ³ ³ Activity (A-G) ³ ³ ³ ³ ³ ³ ³ ³ ³ Ready (R-G) ³ ³ ³ ³ ³ ³ ³ ³ ³ Fault (F-G) ³ ³ ³ ³ ³ ³ ³ ³ ÀÄ Reserved ³ ³ ³ ³ ³ ³ ³ ÀÄÄÄ Write Protect Enable Spinup Delay ÄÙ ³ ³ ³ ³ ³ ÀÄÄÄÄÄÄÄ SCSI ID (10 secs * ID) ³ ³ ³ ³ ÀÄÄÄÄÄÄÄÄÄÄÄ Reserved Motor Start option enable ÄÄÄÙ ³ ³ ³ Parity check DISable ÄÄÄÄÄÙ ³ ³ Reserved ÄÄÄÄÄÄÄÙ ³ ÕÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ͸ ³ ³ Terminator Power Source Options ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ 2 & 4 Ä Initiator supplies power over the SCSI Bus for terminators. ³ ³ Drive supplies no terminator power. ³ ³ 1 & 2 Ä Drive supplies power for its own terminator resistor-paks ³ ³ but not to SCSI Bus. This is the factory setting. ³ ³ 1 & 3 ³ ³ AND Ä Drive supplies power for external terminator at end of the ³ ³ 2 & 4 daisy chain. Terminator resistor-paks must be removed. ³ ³ This option is recommended only for last drive on daisy ³ ³ chain. ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ST410800ND drives are shipped without terminators and have empty terminator sockets on the PCB. You must provide termination resistors for these drives. ST-410800N Elite 9 UNFORMATTED CAPACITY _____________________10,800 FORMATTED CAPACITY (512 byte blk) ________9,090 AVERAGE SECTORS PER TRACK ________________133 (rounded down) ACTUATOR TYPE ____________________________ROTARY VOICE COIL TRACKS ___________________________________132,975 CYLINDERS ________________________________4925 HEADS ____________________________________27 DISCS (5.25 in) __________________________14 MEDIA TYPE _______________________________THIN FILM HEAD TYPE ________________________________THIN FILM RECORDING METHOD _________________________ZBR RLL (1,7) INTERNAL TRANSFER RATE (mbits/sec) _______44-65 INTERNAL TRANSFER RATE AVG (mbyte/sec) ___7.2 EXTERNAL TRANSFER RATE (mbyte/sec) _______10 (burst) SPINDLE SPEED (RPM) ______________________5,400 AVERAGE LATENCY (mSEC) ___________________5.55 COMMAND OVERHEAD (mSEC) __________________<0.5 BUFFER ___________________________________1024 Kbyte Read Look-Ahead, Adaptive, Multi-Segmented Cache INTERFACE ________________________________SCSI-2 FAST ASA BYTES PER TRACK __________________________63,000-91,000 SECTORS PER DRIVE ________________________17,845,731 BYTES PER CYLINDER _______________________1,058,400 to 1,587,600 TPI (TRACKS PER INCH) ____________________3,921 BPI (BITS PER INCH) ______________________ AVERAGE ACCESS (ms) read/write ___________11/12 SINGLE TRACK SEEK (ms) read/write ________0.9/1.7 MAX FULL SEEK (ms) read/write ____________23/24 MTBF (power-on hours) Class A Room _______NA MTBF (power-on hours) Office _____________500,000 POWER DISSIPATION (watts/BTUs) Active ____25/85 Idle ______22/75 POWER REQUIREMENTS: Single-ended/Differential +12V START-UP (amps) _4.8/4.8 +12V TYPICAL (amps) __1.57/1.57 +5V START-UP (amps) __0.98/1.0 +5V TYPICAL (amps) ___0.665/0.71 TYPICAL ( watts seek/read)_32.60/36.41 IDLE (watts) ______________28.34/31.81 USER MANUAL PART NUMBER __________________ ** Already low-level formatted at the factory with nine spare sectors per cylinder, one spare cylinders/unit, one system cylinder/unit, and one diagnostic cylinder/unit. Physical: Height (inches/mm): 3.25/82.6 Width (inches/mm): 5.75/146.1 Depth (inches/mm): 8.0/203 Weight (lbs/kg): 7.8/3.6 Seagate reserves the right to change, without notice, product offerings or specifications. (03/24/94)