---------------------------------------------------------------------- Contents: 04/05/1992 17:26 1,520 LXT-200A.TXT 27/06/1992 12:13 2,224 LXT-213A.TXT 04/05/1992 17:28 2,226 LXT-340A.TXT 27/06/1992 12:13 2,229 LXT-535A.TXT 03/05/1992 23:00 1,847 LXT-A.TXT 22/05/1992 14:16 4,791 25128A.TXT 21/05/1992 18:58 4,692 2585A.TXT 27/06/1992 13:12 7,913 7040A.TXT 04/05/1992 17:02 7,487 7060A.TXT 27/06/1992 13:14 8,039 7080A.TXT 04/05/1992 17:25 7,438 7120A.TXT 27/06/1992 12:52 8,195 7213A.TXT ---------------------------------------------------------------------- ============================================================================== MAXTOR MODEL LXT-200A IDE DRIVE ============================================================================== Interface: AT RLL 1,7 Encoding Capacity, Unformatted Capacity, Formatted AT Compatible Per Drive (Mbytes) : 234.00 Per Drive (Mbytes) : 201.00 Per Surface (Mbytes) : 33.40 Per Surface (Mbytes) : 29.60 Per Sector (Bytes) : 512 Parameters Performance Specifications Cylinders : Physical=1320 Transfer rate, Mbits/sec : 10 : Logical=1314 Access Time (Average) : 15msec : Sectors/Track(6 Zones) Access Time (Track-To-Track): 3msec : Zone 1=33 Access Time (Maximum) : 30msec : Zone 3=53 Data Heads : 7 Pre-Comp : NONE MTBF: 150,000 Hous (POH) Dimensions(Inches): 1.625" x 4.0" x 5.750" Power Requirements: +12VDC +\- 5%. 0.6A Typical, 2.5A Maximum + 5VDC +\- 5%. 1.7A Typical, .75A Maximum NOTE: This drive has been factory Low Level Formatted. Using this drive to full capacity, you require a User Define Drive Type in your system CMOS. The Translated parameters are 816 cylinders, 15 data heads, 32 sectors, no pre-comp. This formats out to 191 Mbytes.  ============================================================================ Maxtor LXT-213A ATA IDE Drive ============================================================================ Key features: * 12 read, 13 write msec average seek time * Advanced buffer implementation (read ahead cache) * Proven AT compatability * Auto parking * No Pre-Comp required SPECIFICATIONS: Performance; Capacity, typical format * Per drive (Mbytes)...........213 * Per sector (bytes)...........512 * Spare capacity (Mbytes)......3.7 AT Bus Transfer(Mbytes)........6.0 Disk Transfer (Mbits/sec)......13.27 Seek time (msec), typical * Read.........................12 * Write........................13 * Track to Track................3 * Maximum......................30 Rotational Speed (RPM).......3600 +/- 5% Average latency (msec).......8.33 FUNCTIONAL: * Data zones....................8 * Bit density (Kbpi)........33-44 * Track density (tpi).......1,600 * Disks.........................4 * Data heads....................7 * Servo heads...................1 * Physical tracks...........9,984 * Sectors per track.........47-72 * Physical cylinders........1,560 PHYSICAL: Dimentions * Height....................1.625 in. (41.3 mm) * Width.....................4.000 in. (101.6 mm) * Depth 5.750 in. (146 mm) * Weight....................2.2 lb. (1 kg.) Temperature limits * Operating.................5-50 (C) * Non-operating...........-40-65 (C) * Temperature gradiant/Hr..20 (C)/hr. Relative humidity limits ( Non condensing) * Operating.................5 to 80% * Non-operating.............5 to 80% * Maximum gradiant/Hr............20% * Maximum wet bulb...............27.6 (C) Shock (G's) * Non-operating..................50 * Operating (no errors)...........3 * Operating (recoverable errors).10 POWER: * +12VDC +/- 5%, 0.6A (typical) 2.1A, Max. * +5VDC +/- 5%, 0.5A (typical) * Power dissapation (typical) 11 WAtts RELIABILITY: MTBF.......................150,000 Hrs. PM........................Not Required MTTR........................20 Minutes Component design life..........5 years  ============================================================================ Maxtor LXT-340A ATA IDE Drive ============================================================================ Key features: * 12 read, 13 write msec average seek time * Advanced buffer implementation (read ahead cache) * Proven AT compatability * Auto parking * No Pre-Comp required SPECIFICATIONS: Performance; Capacity, typical format * Per drive (Mbytes)...........340.5 * Per sector (bytes)...........512 * Spare capacity (Mbytes)......5.5 AT Bus Transfer(Mbytes)........6.0 Disk Transfer (Mbits/sec)......13.27 Seek time (msec), typical * Read.........................12 * Write........................13 * Track to Track................3 * Maximum......................30 Rotational Speed (RPM).......3600 +/- 5% Average latency (msec).......8.33 FUNCTIONAL: * Data zones....................8 * Bit density (Kbpi)........33-44 * Track density (tpi).......1,600 * Disks.........................4 * Data heads....................7 * Servo heads...................1 * Physical tracks..........10,864 * Sectors per track.........47-72 * Physical cylinders........1,560 PHYSICAL: Dimentions * Height....................1.625 in. (41.3 mm) * Width.....................4.000 in. (101.6 mm) * Depth 5.750 in. (146 mm) * Weight....................2.2 lb. (1 kg.) Temperature limits * Operating.................5-50 (C) * Non-operating...........-40-65 (C) * Temperature gradiant/Hr..20 (C)/hr. Relative humidity limits ( Non condensing) * Operating.................5 to 80% * Non-operating.............5 to 80% * Maximum gradiant/Hr............20% * Maximum wet bulb...............27.6 (C) Shock (G's) * Non-operating..................50 * Operating (no errors)...........3 * Operating (recoverable errors).10 POWER: * +12VDC +/- 5%, 0.6A (typical) 2.1A, Max. * +5VDC +/- 5%, 0.5A (typical) * Power dissapation (typical) 11 WAtts RELIABILITY: MTBF.......................150,000 Hrs. PM........................Not Required MTTR........................20 Minutes Component design life..........5 years  ============================================================================ Maxtor LXT-535A ATA IDE Drive ============================================================================ Key features: * 12 read, 13 write msec average seek time * Advanced buffer implementation (read ahead cache) * Proven AT compatability * Auto parking * No Pre-Comp required SPECIFICATIONS: Performance; Capacity, typical format * Per drive (Mbytes)...........535 * Per sector (bytes)...........512 * Spare capacity (Mbytes)......8.7 AT Bus Transfer(Mbytes)........6.0 Disk Transfer (Mbits/sec)......13.27 Seek time (msec), typical * Read.........................12 * Write........................13 * Track to Track................3 * Maximum......................30 Rotational Speed (RPM).......3600 +/- 5% Average latency (msec).......8.33 FUNCTIONAL: * Data zones....................8 * Bit density (Kbpi)........33-44 * Track density (tpi).......1,600 * Disks.........................6 * Data heads...................11 * Servo heads...................1 * Physical tracks..........17,072 * Sectors per track.........47-72 * Physical cylinders........1,560 PHYSICAL: Dimentions * Height....................1.625 in. (41.3 mm) * Width.....................4.000 in. (101.6 mm) * Depth 5.750 in. (146 mm) * Weight....................2.2 lb. (1 kg.) Temperature limits * Operating.................5-50 (C) * Non-operating...........-40-65 (C) * Temperature gradiant/Hr..20 (C)/hr. Relative humidity limits ( Non condensing) * Operating.................5 to 80% * Non-operating.............5 to 80% * Maximum gradiant/Hr............20% * Maximum wet bulb...............27.6 (C) Shock (G's) * Non-operating..................50 * Operating (no errors)...........3 * Operating (recoverable errors).10 POWER: * +12VDC +/- 5%, 0.6A (typical) 2.1A, Max. * +5VDC +/- 5%, 0.5A (typical) * Power dissapation (typical) 11 WAtts RELIABILITY: MTBF.......................150,000 Hrs. PM........................Not Required MTTR........................20 Minutes Component design life..........5 years(min)  =============================================================================== MAXTOR "APACHE" 2585A IDE DRIVE =============================================================================== KEY FEATURES: * 15ms average seek * 32K on-board cache * Ultra-low power consumption * >250,000 hour MTBF * 1:1 interleave * Automatic actuator lock * Single-sided surface mount PCBA * 100 Gs shock resistance * Embedded AT controller * High data transfer rate * Automatic error detection & correction SPECIFICATIONS: Formatted: ................................. 85,417,984 bytes Embedded Controller: ....................... AT Actuator type: ............................. Rotary Voice Coil Number of Disks: ........................... 2 Data Surfaces: ............................. 4 Data Heads: ................................ 4 Servo: ..................................... Embedded Tracks per surface: ........................ 1,092 Track Density (average): ................... 1,993 tpi Bytes per Block: ........................... 512 Data Zones: ................................ 4 Sectors per track: ......................... 24-48 PERFORMANCE (Typical): Seek times* (ms) Track to track: ....................... 3 Average: .............................. 15 Maximum: .............................. 27 Average latency (ms) ....................... 8.4 Rotation speed ............................. 3,551 RPM Controller overhead ........................ 1 ms Data transfer rate (Mbytes per sec) To/from media ......................... 0.95-1.81 To/from buffer (AT) ................... 8.0 Start time / power up (0-3,551 RPM) Typical ............................... ó5 sec Stop time / power down Typical ............................... ó3 sec Start/stop cycles .......................... 40,000 typical Interleave: ................................ 1:1 Buffer Size: ............................... 32K Interface: ................................. AT Recording Method: .......................... 1,7 RLL Recording Density (Kbpi) ................... 31-39 Flux Density (Kfci) ........................ 23-29 Power Requirments (Typical): Mode +5VDC ñ5% Power Spin-up 970mA Avg Peak R/W 440mA 2.2W Idle 220mA 1.1W Standby / Sleep 40mA 0.2W Physical: Height: 0.69" (17.5 mm) Length: 4.00" (101.6 mm) Width: 2.75" (69.84 mm) Weight: 0.374 lbs.(170 gm) Environmental: Temperature Operating .............................. 5øC to 55øC Non-operating .......................... -40øC to 60øC Thermal gradient ....................... 20øC per hour max Humidity Operating .............................. 5% to 90% non-condensing Non-operating .......................... 5% to 90% non-condensing Altitude (relative to sea level) Operating .............................. -200 to 10,000 feet Non-operating .......................... 40,000 feet max Reliability and Maintenance: MTBF ....................................... >250,000 hours (POH, predicted at 35 degrees C) Preventative Maintenance ................... None Component design life ...................... 5 years (minimum) Data reliability Hard read errors ...................... <10 non-recoverable per 10 to the 14th bits read Shock & Vibration (typical) Shock measured at half-sine pulse. Vibration measured at swept sine, 1 octave per minute Operating shock ........................ 100 Gs, 11ms 1/2 sine wave Non-operating shock .................... 10 Gs, 11ms 1/2 sine wave Non-operating Vibration 5-20 Hz ............................... .245" (double amplitude) 20-500 Hz ............................. 5 Gs peak amplitude Operating Vibration 5-20 Hz ............................... .049" (double amplitude) 20-300 Hz ............................. 1 Gs peak amplitude Acoustic Noise 34 dBA at 1 meter (typical) in idle (spinning) on-track mode. * The average of 10,000 random seek times (measured on independent test equipment) consitutes the average seek time specification. 2585A and 25128a are trademarks of Maxtor Corporation. Specifications subject to change without notice. ==============================================================================  ============================================================================== MAXTOR CHEYENNE 7040A IDE DRIVE =============================================================================== SPECIFICATIONS: Formatted storage capacity (bytes) 43,130,880 Embedded Controller AT Actuator Type Voice Coil Number of Disks 1 Data Surfaces 2 Data Heads 2 Servo Embedded Tracks per Surface 1,170 Track Density (average) 1,490 Track Capacity (formatted) 18,432 bytes Bytes per Block 512 Blocks per Drive 84,240 Sectors per Track 36 physical PERFORMANCE Seek Times (ms) Track to Track 4 Average 19 Maximum 40 Average Latency (ms) 8.1 Rotation Speed (+/- 5%) 3,703 RPM Controller Overhead 1 ms Data Transfer Rate (MBytes per sec) To/From Media 1.35 To/From Buffer 5.4 Start Time Power Up (0-3,703 RPM) Typical 10 sec Maximum 40 sec Stop time Power Down Typical 10 sec Maximum 10 sec Start/Stop Cycles 10,000 Interleave 1:1 Buffer Size 32K Interface AT Recording Method 1,7 RLL Recording Density-ID 30,625 bpi Flux Density- ID (flux reversals per inch) 22,969 POWER REQUIREMENTS MODE +12V DC 5% +5V DC 5% POWER R/W 175 ma 300 ma 3.6W Seek 233 ma 200 ma 3.8W Idle 75 ma 180 ma 1.8W Sleep 2 ma 20 ma 0.1W Spin-Up 700 ma 180 ma 9.5W peak Standby 2 ma 120 ma 0.6W PHYSICAL Height 1.00" (2.54 cm) Length 5.75" (14.61 cm) Width 4.00" (10.16 cm) Weight 1.2 lbs (.50 kg) ENVIRONMENTAL Temperature Operating 5 deg C to 50 deg C Non-operating -40 deg C to 60 deg C Thermal 20 deg C per hour max Humidity Operating 8% to 80% non-condensing Non-operating 8% to 80% non-condensing Maximum Wet Bulb 26 deg C Altitude (relative to sea level) Operating -200 to 10,000 feet Non-operating 40,000 feet max RELIABILITY AND MAINTENANCE MTBF 150,000 hours (predicted at 35 C) MTTR 30 minutes typical Preventative Maintenance None Component Design Life 5 years SHOCK AND VIBRATION Shock measured at half-sine pulse. Vibration measured at swept sine, 1 octave per minute. Non-operating shock 70 Gs, 11 ms Operating shock 5 Gs, 11 ms (without non-recoverable errors) Non-operating Vibration 5-23 Hz 0.072" (double amplitude) 24-500 Hz 2 Gs peak amplitude Operating Vibration 5-23 Hz 0.0336" (double amplitude) 24-300 Hz 1 G peak amplitude 7040A/7080A JUMPER DESIGNATION ³J20³J19³J18³J17³J16³J15³J14³J13³J11³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄ´ ³ Master/Slave ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ Only drive in single drive system* ³ J ³ J ³ ³ ³ ³ ³ ³ ³ ³ ³ Master in dual drive system ³ J ³ O ³ ³ ³ ³ ³ ³ ³ ³ ³ Slave in dual drive system ³ O ³ J ³ ³ ³ ³ ³ ³ ³ ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄ´ ³ ECC Bytes ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ 4 Bytes* ³ ³ ³ J ³ ³ ³ ³ ³ ³ ³ ³ 7 Bytes ³ ³ ³ O ³ ³ ³ ³ ³ ³ ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄ´ ³ Drive Model Number ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ 7040A ³ ³ ³ ³ O ³ ³ ³ ³ ³ ³ ³ 7080A ³ ³ ³ ³ J ³ ³ ³ ³ ³ ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄ´ ³ Idle Mode Latch ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ Option Disabled* ³ ³ ³ ³ ³ O ³ ³ ³ ³ ³ ³ Option Enabled ³ ³ ³ ³ ³ J ³ ³ ³ ³ ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄ´ ³ Reserved for Factory ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ Normal Operation* ³ ³ ³ ³ ³ ³ O ³ ³ ³ ³ ³ Factory Test Mode ³ ³ ³ ³ ³ ³ J ³ ³ ³ ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄ´ ³ Default Config @ Power Up ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ Cyls Hds Sec MBytes ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄ´ ³ 7040A 981 5 17* 40.7 ³ ³ ³ ³ O ³ ³ ³ O ³ O ³ ³ ³ 524 4 40 40.9 ³ ³ ³ ³ O ³ ³ ³ O ³ J ³ ³ ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄ´ ³ 7080A 981 10 17* 81.4 ³ ³ ³ ³ J ³ ³ ³ O ³ O ³ ³ ³ 832 6 33 80.4 ³ ³ ³ ³ J ³ ³ ³ O ³ J ³ ³ ³ 1024 9 17 76.5 ³ ³ ³ ³ J ³ ³ ³ J ³ O ³ ³ ³ (60MB) 762 4 39 58.0 ³ ³ ³ ³ J ³ ³ ³ J ³ J ³ ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄ´ ³ I/O Channel Ready ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ Disabled* ³ ³ ³ ³ ³ ³ ³ ³ ³ O ³ ³ Enabled ³ ³ ³ ³ ³ ³ ³ ³ ³ J ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÁÄÄÄÁÄÄÄÁÄÄÄÁÄÄÄÁÄÄÄÁÄÄÄÁÄÄÄÁÄÄÄÙ J=Jumpered O=Open *=Default ÚÄÄÄ¿ ³ Note: A spare jumper is supplied ³ø ø³J11 ³ across J13 & J14 J20 J18 J16 ³ø ø³J13 ³ ÚÄÅÄÄÄÅÄÄÄÅÄ¿ ³ø ø³J14 ³ ³ Û Û Û Û ø ³ ³ø ø³J15 ³ ³ Û Û Û Û ø ³ ÀÄÄÄÙ ³ ÀÄÄÄÅÄÄÄÅÄÄÄÙ ³ J19 J17 ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  ============================================================================== MAXTOR CHEYENNE 7060A IDE DRIVE =============================================================================== SPECIFICATIONS: Formatted: 65.2 Million bytes Embedded Controller: AT or SCSI Number of Disks: 1 Data Surfaces: 2 Data Heads: 2 Servo: Embedded Tracks per Surface: 1,516 Track Density (average): 1,800 tpi Track capacity (formatted): 21,504 Bytes per Block: 512 Blocks per drive: 121,856 Sectors per track: 42 physical PERFORMANCE (Typical): Seek times* (ms) Track to track: 4 Average: 15 Maximum: 30 Average latency (ms) 8.55 Rotation speed 3,524 RPM Controller overhead 1 ms Data transfer rate (Mbytes per sec) To/from media 1.5 To/from buffer (AT) 6.0 To/from buffer (SCSI) 5 (sync) 3 (async) Start time/power up (0 - 3,524 RPM) Typical <7.5 sec Maximum 40 sec Stop Time Maximum <8 sec Start/stop cycles: 20,000 min Interleave: 1:1 Buffer Size: 64K Interface: AT or SCSI Recording Method: 1,7 RLL Recording density - ID: 34,087 bpi Flux density - ID (flux reversals per inch): 25,565 POWER REQUIREMENTS (Typical): MODE +12V DC +8% +5V DC +5% POWER ---- ----------- ---------- ----- Spin-up 1A Avg Peak 150 mA Avg Peak 10.2W Peak R/W 280 mA 290 mA 4.8W Idle 120 mA 70 mA 1.8W Standby 10 mA 90 mA 0.7W Sleep 0 mA 20 mA 0.1W Physical: Height: 1.00" (2.54 cm) Length: 5.75" (14.61 cm) Width: 4.00" (10.16 cm) Weight: 1.2 lbs. (.57 kg) ENVIRONMENTAL: Temperature Operating: 5 degrees C to 50 degrees C Non-operating: -40 degrees C to 65 degrees C Thermal gradient: 20 degrees C per hour max Humidity Operating: 8% to 80% non-condensing Non-operating: 8% to 80% non-condensing Maximum wet bulb: 26 degrees C Altitude (Relative to sea level) Operating -200 to 10,000 feet Non-operating 40,000 feet max RELIABILITY & MAINTENANCE: MTBF: 150,000 hours (POH),predicted at 35 degrees C) MTTR: 30 minutes typical Preventive maintenance: None Component Design Life: 5 years (minimum) Data Reliability Hard read errors ^10 per 10-13 bits read Shock and Vibration Shock measured at half-sine pulse. Vibration measured at swept sine, 1 octave per minute. Non-operating shock: 70Gs, 1ms Operating shock: 10 Gs, 11ms (without non-recoverable errors) Non-operating vibration: 5 - 11 Hz 0.320" (double amplitude) 11 - 300 Hz 2G's, 11 ms (without non- recoverable errors) Operating vibration: 5 - 11 Hz 0.160" (double amplitude) 11 - 300 Hz 1 G peak amplitude Accoustic Noise 42dBa max. at 1 meter =============================================================================== 7060A/7120A JUMPER DESIGNATIONS ³J20³J19³J18³J17³J16³J15³J14³J13³J11³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄ´ ³ Master/Slave ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ Only drive in single drive system* ³ J ³ J ³ ³ ³ ³ ³ ³ ³ ³ ³ Master in dual drive system ³ J ³ O ³ ³ ³ ³ ³ ³ ³ ³ ³ Slave in dual drive system ³ O ³ J ³ ³ ³ ³ ³ ³ ³ ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄ´ ³ ECC Bytes ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ 4 Bytes* ³ ³ ³ J ³ ³ ³ ³ ³ ³ ³ ³ 7 Bytes ³ ³ ³ O ³ ³ ³ ³ ³ ³ ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄ´ ³ Drive Model Number ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ 7060A ³ ³ ³ ³ O ³ ³ ³ ³ ³ ³ ³ 7120A ³ ³ ³ ³ J ³ ³ ³ ³ ³ ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄ´ ³ Idle Mode Latch ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ Option Disabled* ³ ³ ³ ³ ³ O ³ ³ ³ ³ ³ ³ Option Enabled ³ ³ ³ ³ ³ J ³ ³ ³ ³ ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄ´ ³ Reserved for Factory ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ Normal Operation* ³ ³ ³ ³ ³ ³ O ³ ³ ³ ³ ³ Factory Test Mode ³ ³ ³ ³ ³ ³ J ³ ³ ³ ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄ´ ³ Default Config @ Power Up ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ Cyls Hds Sec MBytes ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄ´ ³ 7060A 1024 7 17* 62.3 ³ ³ ³ ³ O ³ ³ ³ O ³ O ³ ³ ³ 925 8 17 60.7 ³ ³ ³ ³ O ³ ³ ³ O ³ J ³ ³ ³ 762 8 39 60.8 ³ ³ ³ ³ O ³ ³ ³ J ³ O ³ ³ ³ 467 16 17 65.0 ³ ³ ³ ³ O ³ ³ ³ J ³ J ³ ³ ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄ´ ³ 7120A 1024 14 17* 124.7 ³ ³ ³ ³ J ³ ³ ³ O ³ O ³ ³ ³ 900 15 17 117.5 ³ ³ ³ ³ J ³ ³ ³ O ³ J ³ ³ ³ 762 16 17 121.7 ³ ³ ³ ³ J ³ ³ ³ J ³ O ³ ³ ³ 936 16 17 130.3 ³ ³ ³ ³ J ³ ³ ³ J ³ J ³ ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄ´ ³ I/O Channel Ready ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ Disabled* ³ ³ ³ ³ ³ ³ ³ ³ ³ O ³ ³ Enabled ³ ³ ³ ³ ³ ³ ³ ³ ³ J ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÁÄÄÄÁÄÄÄÁÄÄÄÁÄÄÄÁÄÄÄÁÄÄÄÁÄÄÄÁÄÄÄÙ J=Jumpered O=Open *=Default ÚÄÄÄ¿ ³ ³ø ø³J11 ³ J20 J18 J16 ³ø ø³J13 ³ ÚÄÅÄÄÄÅÄÄÄÅÄ¿ ³ø ø³J14 ³ ³ Û Û Û Û ø ³ ³ø ø³J15 ³ ³ Û Û Û Û ø ³ ÀÄÄÄÙ ³ ÀÄÄÄÅÄÄÄÅÄÄÄÙ ³ J19 J17 ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Maxtor 7060A/7120A Jumper Designation And Parameters  ============================================================================== CHEYENNE 7080A (IDE) =============================================================================== SPECIFICATIONS: Formatted storage capacity (bytes) .............. 85,450,752 Embedded Controller.............................. AT Actuator Type ................................... Voice Coil Number of Disks ................................. 2 Data Surfaces ................................... 4 Data Heads ...................................... 4 Servo ........................................... Embedded Tracks per Surface .............................. 1,170 Track Density (average) ......................... 1,490 tpi Track Capacity (formatted) ...................... 18,432 bytes Bytes per Block ................................. 512 Blocks per Drive ................................ 168,360 Sectors per Track ............................... 36 physical PERFORMANCE Seek Times (typical, including setting time) Track to Track ................................ 6 ms Average ....................................... 17 ms Maximum ....................................... 35 ms Average Latency (ms) ............................ 8.1 ms Rotation Speed (+/- 5%) ......................... 3,703 RPM Controller Overhead ............................. 1 ms Data Transfer Rate (MBytes per sec) To/From Media ................................. 1.35 To/From Buffer ................................ 5.4 Start Time Power Up (0-3,703 RPM) Typical ....................................... <8 sec Maximum ....................................... 40 sec Stop time Power Down Typical ....................................... <8 sec Maximum ....................................... 10 sec Start/Stop Cycles ............................... 13,000 Interleave ...................................... 1:1 Buffer Size ..................................... 32K Interface ....................................... AT Recording Method ................................ 1,7 RLL Recording Density-ID ............................ 30,625 bpi Flux Density- ID (flux reversals per inch) ....................... 22,969 POWER REQUIREMENTS (Typical) MODE +12V DC 5% +5V DC 5% POWER R/W 230 mA 285 mA 4.0W Idle 130 mA 135 mA 2.3W Sleep 0.6 mA 37 mA 0.19W Spin-Up 940 Avg mA 300 mA 9.5W peak Standby 15 mA 150 mA 0.92W PHYSICAL Height 1.00" (2.54 cm) Length 5.75" (14.61 cm) Width 4.00" (10.16 cm) Weight 1.2 lbs (.50 kg) ENVIRONMENTAL Temperature Operating 5 deg C to 50 deg C Non-operating -40 deg C to 60 deg C Thermal 20 deg C per hour max Humidity Operating 8% to 80% non-condensing Non-operating 8% to 80% non-condensing Maximum Wet Bulb 26 deg C Altitude (relative to sea level) Operating -200 to 10,000 feet Non-operating 40,000 feet max RELIABILITY AND MAINTENANCE MTBF 150,000 hours (predicted at 35 C) MTTR 30 minutes typical Preventative Maintenance None Component Design Life 5 years SHOCK AND VIBRATION Shock measured at half-sine pulse. Vibration measured at swept sine, 1 octave per minute. Non-operating shock 70 Gs, 11 ms Operating shock 10 Gs, 11 ms (without non-recoverable errors) Non-operating Vibration 5-23 Hz 0.072" (double amplitude) 24-500 Hz 2 Gs peak amplitude Operating Vibration 5-23 Hz 0.036" (double amplitude) 24-300 Hz 1 G peak amplitude *Novell Labs Netware Certified =============================================================================== 7040A/7080A JUMPER DESIGNATION ³J20³J19³J18³J17³J16³J15³J14³J13³J11³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄ´ ³ Master/Slave ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ Only drive in single drive system* ³ J ³ J ³ ³ ³ ³ ³ ³ ³ ³ ³ Master in dual drive system ³ J ³ O ³ ³ ³ ³ ³ ³ ³ ³ ³ Slave in dual drive system ³ O ³ J ³ ³ ³ ³ ³ ³ ³ ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄ´ ³ ECC Bytes ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ 4 Bytes* ³ ³ ³ J ³ ³ ³ ³ ³ ³ ³ ³ 7 Bytes ³ ³ ³ O ³ ³ ³ ³ ³ ³ ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄ´ ³ Drive Model Number ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ 7040A ³ ³ ³ ³ O ³ ³ ³ ³ ³ ³ ³ 7080A ³ ³ ³ ³ J ³ ³ ³ ³ ³ ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄ´ ³ Idle Mode Latch ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ Option Disabled* ³ ³ ³ ³ ³ O ³ ³ ³ ³ ³ ³ Option Enabled ³ ³ ³ ³ ³ J ³ ³ ³ ³ ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄ´ ³ Reserved for Factory ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ Normal Operation* ³ ³ ³ ³ ³ ³ O ³ ³ ³ ³ ³ Factory Test Mode ³ ³ ³ ³ ³ ³ J ³ ³ ³ ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄ´ ³ Default Config @ Power Up ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ Cyls Hds Sec MBytes ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄ´ ³ 7040A 981 5 17* 40.7 ³ ³ ³ ³ O ³ ³ ³ O ³ O ³ ³ ³ 524 4 40 40.9 ³ ³ ³ ³ O ³ ³ ³ O ³ J ³ ³ ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄ´ ³ 7080A 981 10 17* 81.4 ³ ³ ³ ³ J ³ ³ ³ O ³ O ³ ³ ³ 832 6 33 80.4 ³ ³ ³ ³ J ³ ³ ³ O ³ J ³ ³ ³ 1024 9 17 76.5 ³ ³ ³ ³ J ³ ³ ³ J ³ O ³ ³ ³ (60MB) 762 4 39 58.0 ³ ³ ³ ³ J ³ ³ ³ J ³ J ³ ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄ´ ³ I/O Channel Ready ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ Disabled* ³ ³ ³ ³ ³ ³ ³ ³ ³ O ³ ³ Enabled ³ ³ ³ ³ ³ ³ ³ ³ ³ J ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÁÄÄÄÁÄÄÄÁÄÄÄÁÄÄÄÁÄÄÄÁÄÄÄÁÄÄÄÁÄÄÄÙ J=Jumpered O=Open *=Default ÚÄÄÄ¿ ³ Note: A spare jumper is supplied ³ø ø³J11 ³ across J13 & J14 J20 J18 J16 ³ø ø³J13 ³ ÚÄÅÄÄÄÅÄÄÄÅÄ¿ ³ø ø³J14 ³ ³ Û Û Û Û ø ³ ³ø ø³J15 ³ ³ Û Û Û Û ø ³ ÀÄÄÄÙ ³ ÀÄÄÄÅÄÄÄÅÄÄÄÙ ³ J19 J17 ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  ============================================================================== MAXTOR CHEYENNE 7120A IDE DRIVE =============================================================================== SPECIFICATIONS: Formatted: 130.4 Million bytes Embedded Controller: AT or SCSI Number of Disks: 2 Data Surfaces: 4 Data Heads: 4 Servo: Embedded Tracks per Surface: 1,156 Track Density (average): 1,800 tpi Track capacity (formatted): 21,504 Bytes per Block: 512 Blocks per drive: 254,688 Sectors per track: 42 physical PERFORMANCE (Typical): Seek times* (ms) Track to track: 4 Average: 15 Maximum: 30 Average latency (ms) 8.55 Rotation speed 3,524 RPM Controller overhead 1 ms Data transfer rate (Mbytes per sec) To/from media 1.5 To/from buffer (AT) 6.0 To/from buffer (SCSI) 5 (sync) 3 (async) Start time/power up (0 - 3,524 RPM) Typical 3 sec Maximum 10 sec Start/stop cycles: 20,000 min Interleave: 1:1 Buffer Size: 64K Interface: AT or SCSI Recording Method: 1,7 RLL Recording density - ID: 34,087 bpi Flux density - ID (flux reversals per inch): 25,565 POWER REQUIREMENTS (Typical): MODE +12V DC +8% +5V DC +5% POWER ---- ----------- ---------- ----- Spin-up 1 A Avg Peak 150 mA Avg Peak 10.2W Peak R/W 280 mA 290 mA 4.8W Idle 120 mA 70 mA 1.8W Standby 10 mA 90 mA 0.7W Sleep 0 mA 20 mA 0.1W Physical: Height: 1.00" (2.54 cm) Length: 5.75" (14.61 cm) Width: 4.00" (10.16 cm) Weight: 1.2 lbs. (.57 kg) ENVIRONMENTAL: Temperature Operating: 5 degrees C to 50 degrees C Non-operating: -40 degrees C to 65 degrees C Thermal gradient: 20 degrees C per hour max Humidity Operating: 8% to 80% non-condensing Non-operating: 8% to 80% non-condensing Maximum wet bulb: 26 degrees C Altitude (Relative to sea level) Operating -200 to 10,000 feet Non-operating 40,000 feet max RELIABILITY & MAINTENANCE: MTBF: 150,000 hours (POH),predicted at 35 degrees C) MTTR: 30 minutes typical Preventive maintenance: None Component Design Life: 5 years (minimum) Data Reliability Hard read errors ^10 per 10-13 bits read Shock and Vibration Shock measured at half-sine pulse. Vibration measured at swept sine, 1 octave per minute. Non-operating shock: 70Gs, 1ms Operating shock: 10 Gs, 11ms (without non-recoverable errors) Non-operating vibration: 5 - 11 Hz 0.320" (double amplitude) 11 - 300 Hz 2G's, 11 ms (without non- recoverable errors) Operating vibration: 5 - 11 Hz 0.160" (double amplitude) 11 - 300 Hz 1 G peak amplitude Accoustic Noise 42dBa max. at 1 meter =============================================================================== 7060A/7120A JUMPER DESIGNATIONS ³J20³J19³J18³J17³J16³J15³J14³J13³J11³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄ´ ³ Master/Slave ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ Only drive in single drive system* ³ J ³ J ³ ³ ³ ³ ³ ³ ³ ³ ³ Master in dual drive system ³ J ³ O ³ ³ ³ ³ ³ ³ ³ ³ ³ Slave in dual drive system ³ O ³ J ³ ³ ³ ³ ³ ³ ³ ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄ´ ³ ECC Bytes ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ 4 Bytes* ³ ³ ³ J ³ ³ ³ ³ ³ ³ ³ ³ 7 Bytes ³ ³ ³ O ³ ³ ³ ³ ³ ³ ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄ´ ³ Drive Model Number ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ 7060A ³ ³ ³ ³ O ³ ³ ³ ³ ³ ³ ³ 7120A ³ ³ ³ ³ J ³ ³ ³ ³ ³ ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄ´ ³ Idle Mode Latch ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ Option Disabled* ³ ³ ³ ³ ³ O ³ ³ ³ ³ ³ ³ Option Enabled ³ ³ ³ ³ ³ J ³ ³ ³ ³ ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄ´ ³ Reserved for Factory ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ Normal Operation* ³ ³ ³ ³ ³ ³ O ³ ³ ³ ³ ³ Factory Test Mode ³ ³ ³ ³ ³ ³ J ³ ³ ³ ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄ´ ³ Default Config @ Power Up ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ Cyls Hds Sec MBytes ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄ´ ³ 7060A 1024 7 17* 62.3 ³ ³ ³ ³ O ³ ³ ³ O ³ O ³ ³ ³ 925 8 17 60.7 ³ ³ ³ ³ O ³ ³ ³ O ³ J ³ ³ ³ 762 8 39 60.8 ³ ³ ³ ³ O ³ ³ ³ J ³ O ³ ³ ³ 467 16 17 65.0 ³ ³ ³ ³ O ³ ³ ³ J ³ J ³ ³ ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄ´ ³ 7120A 1024 14 17* 124.7 ³ ³ ³ ³ J ³ ³ ³ O ³ O ³ ³ ³ 900 15 17 117.5 ³ ³ ³ ³ J ³ ³ ³ O ³ J ³ ³ ³ 762 16 17 121.7 ³ ³ ³ ³ J ³ ³ ³ J ³ O ³ ³ ³ 936 16 17 130.3 ³ ³ ³ ³ J ³ ³ ³ J ³ J ³ ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄ´ ³ I/O Channel Ready ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ ³ Disabled* ³ ³ ³ ³ ³ ³ ³ ³ ³ O ³ ³ Enabled ³ ³ ³ ³ ³ ³ ³ ³ ³ J ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÁÄÄÄÁÄÄÄÁÄÄÄÁÄÄÄÁÄÄÄÁÄÄÄÁÄÄÄÁÄÄÄÙ J=Jumpered O=Open *=Default ÚÄÄÄ¿ ³ ³ø ø³J11 ³ J20 J18 J16 ³ø ø³J13 ³ ÚÄÅÄÄÄÅÄÄÄÅÄ¿ ³ø ø³J14 ³ ³ Û Û Û Û ø ³ ³ø ø³J15 ³ ³ Û Û Û Û ø ³ ÀÄÄÄÙ ³ ÀÄÄÄÅÄÄÄÅÄÄÄÙ ³ J19 J17 ³ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ Maxtor 7060A/7120A Jumper Designation And Parameters  =============================================================================== MAXTOR CHEYENNE 7213A IDE DRIVE =============================================================================== KEY FEATURES: * 15ms average seek * 64K on-board cache * Low power consumption * Zone density recording * 1:1 interleave * Dual drive master/slave support * Rotary voice coil * Automatic actuator lock * Single-sided surface mount PCBA SPECIFICATIONS: Formatted: ................................. 212,787,200 Bytes Embedded Controller: ....................... AT Actuator type: ............................. Voice Coil Number of Disks: ........................... 2 Data Surfaces: ............................. 4 Data Heads: ................................ 4 Servo: ..................................... Embedded Tracks per surface: ........................ 1,698 Track Density (average): ................... 1,973 tpi Bytes per Block: ........................... 512 Sectors per track: ......................... 42 physical PERFORMANCE (Typical): Seek times* (ms) Track to track: ....................... 3 Average: .............................. 15 ** Maximum: .............................. 28.2 Average latency (ms) ....................... 8.45 Rotation speed ............................. 3,551 RPM Controller overhead ........................ 1 ms Data transfer rate (Mbytes per sec) To/from media ......................... 2.83 To/from buffer (AT) ................... 9.0 To/from interface ..................... 7.5 Start time / power up (0-3,551 RPM) Typical ............................... ó7 sec Stop time / power down Typical ............................... ó3 sec Start/stop cycles .......................... 20,000 typical Interleave: ................................ 1:1 Buffer Size: ............................... 64K Interface: ................................. AT Recording Method: .......................... 1,7 RLL Recording Density (Kbpi) ................... 42.7 maximum Flux Density (Kfci) ........................ 32.0 maximum Power Requirments (Typical): Mode +12VDC ñ8% +5VDC ñ5% Power R/W 145mA 340mA 3.7 W Idle 140mA 330mA 3.5 W Physical: Height: 1.00" (2.54 cm) Length: 5.75" (14.61 cm) Width: 4.00" (10.16 cm) Weight: 1.2 lbs. (.57 kg) Environmental: Temperature Operating .............................. 5øC to 50øC Non-operating .......................... -40øC to 65øC Thermal gradient ....................... 20øC per hour max Humidity *** Operating .............................. 5% to 95% non-condensing Non-operating .......................... 5% to 95% non-condensing Maximum wet bulb ....................... 20ø C Altitude (relitive to sea level) Operating .............................. -200 to 10,000 feet Non-operating .......................... 40,000 feet max Reliability and Maintenance: MTBF ....................................... >150,000 hours (POH, predicted at 35 degrees C) Preventative Maintenance ................... None Component design life ...................... 5 years (minimum) Data reliability Hard read errors ...................... <10 per 10 to the 13th bits read Shock & Vibration (typical) Shock measured at half-sine pulse. Vibration measured at swept sine, 1 octave per minute Operating shock ........................ 70 Gs, 11ms Non-operating shock .................... 10 Gs, 11ms (without non-recoverable errors) Non-operating Vibration 5-20 Hz ............................... .10" (double amplitude) 20 - 300 Hz ........................... 2 Gs peak amplitude Operating Vibration 5-20 Hz ............................... .05" (double amplitude) 20 - 300 Hz ........................... 1 Gs peak amplitude Acoustic Noise 35 dBA at 1 meter (typical) in idle (spinning) on track mode. (sound power -4.5 bels average) * At nominal DC input volages ** The average of 10,000 random seek times (measured on independent test equipment) consitutes the average seek time specification. *** Operating and non-operating specs meet MIL-STD-810E. Method 507.3 Table 507.3-I High humidity diurnal catagory. Natural, High Humidity, Cyclic (Cycle 3) ============================================================================== 7213A JUMPER DESIGNATION ³J23³J22³J20³J19³J16³ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄ´ ³ SYNC Spindle Control ³ ³ ³ ³ ³ ³ ³ Sync Spindle Disabled* ³ O ³ ³ ³ ³ ³ ³ Sync Spindle Enabled ³ J ³ ³ ³ ³ ³ ³ Sync Slave ³ ³ O ³ ³ ³ ³ ³ Sync Master ³ ³ J ³ ³ ³ ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄ´ ³ Master/Slave ³ ³ ³ ³ ³ ³ ³ Only drive in single drive system* ³ ³ ³ J ³ O ³ ³ ³ Master in dual drive system ³ ³ ³ J ³ O ³ ³ ³ Slave in dual drive system ³ ³ ³ O ³ J ³ ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄÅÄÄÄ´ ³ I/O Channel Ready ³ ³ ³ ³ ³ ³ ³ Enabled* ³ ³ ³ ³ ³ J ³ ³ Disabled ³ ³ ³ ³ ³ O ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÁÄÄÄÁÄÄÄÁÄÄÄÁÄÄÄÙ J=Jumpered O=Open *=Default ÚÄÄÄÄÄ¿ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÚÄÄ¿ ÚÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ÚÄÄ¿ ÚÄÄÄÄÄÄÄÄÄ¿ ³ ÀÄÄÙ ÀÄÄÄÄÄÙ ÀÄÄÙ ÀÄÄÄÄÄÙ ÀÄÄ٠ÿ ³ ÚÄÄÄÄ¿ ÚÄÁÁ¿ ³ Å ÖÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ>³::::³ ´ ³ ³ ÉÍÍÍÍÍÍÍÊÍÍÍÍÍÍÍÍ» ÀÄÄÄÄÙ ´ ³ ³ º J24 J22 º Å ÚÄÄ¿ ´ ³ ³ º ÚÄÄÄÅÄÄÄÅÄ¿ º ³,,³ ´ ³ ³ º ³ * * * * ³ º ÖÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ>³::³ ´ ³ ³ º ³ * * * * ³ º ÉÍÍÍÍÍÍÍÊÍÍÍÍÍÍÍ» ³::³ ´J1 ³ ³ º ÀÄÅÄÄÄÅÄÄÄÙ º º ÚÄÄÄÄÄ¿ º ÀÄÄÙ ´ ³ ³ º J25 J23 º º J20Å ßßß ³ º ´ ³ ³ ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ º ³ * * ÅJ19 º ´ ³ ³ º J18Å * * ³ º Å ´ ³ ³ º ³ * * ÅJ17 º ´ ³ ³ º J16Å * * ³ º ´ ³ ³ Å º ÀÄÄÄÄÄÙ º ÀÄÄÂÙ ³ ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ ÚÄÄÄÁ¿ ³ Å µ ³ ³ µ ³ ³ µ J3 ³ ³ ÚÄÄ¿ ÚÄÄÄÄÄ¿ ÚÄÄ¿ ÚÄÄÄÄ¿ ÚÄÄ¿ µ ³ ÀÄÄÄÄÙ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÀÄÄÄÙ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ ÀÄÄÙ ÀÄÄÄÄÄÁÄÄÄÄÙ CMOS Configuration: Cyls Hds Write Landing Sec/Trk PreComp Zone --------------------------------- 683 16 0 0 38 Yields: 212.8 Million Bytes (Approx. 202 Mega-Bytes) 7213A and 7213S are trademarks of Maxtor Corporation. Specifications subject to change without notice.  =============================================================================== MAXTOR "APACHE" 25128A IDE DRIVE =============================================================================== KEY FEATURES: * 15ms average seek * 32K on-board cache * Ultra-low power consumption * >250,000 hour MTBF * 1:1 interleave * Automatic actuator lock * Single-sided surface mount PCBA * 100 Gs shock resistance * Embedded AT controller * High data transfer rate * Automatic error detection & correction SPECIFICATIONS: Formatted: ................................. 128,235,520 bytes Embedded Controller: ....................... AT Actuator type: ............................. Rotary Voice Coil Number of Disks: ........................... 2 Data Surfaces: ............................. 4 Data Heads: ................................ 4 Servo: ..................................... Embedded Tracks per surface: ........................ 1,092 Track Density (average): ................... 2,550 tpi Bytes per Block: ........................... 512 Data Zones: ................................ 4 Sectors per track: ......................... 30-60 PERFORMANCE (Typical): Seek times* (ms) Track to track: ....................... 3 Average: .............................. 15 Maximum: .............................. 27 Average latency (ms) ....................... 8.4 Rotation speed ............................. 3,551 RPM Controller overhead ........................ 1 ms Data transfer rate (Mbytes per sec) To/from media ......................... 1.19-2.29 To/from buffer (AT) ................... 8.0 Start time / power up (0-3,551 RPM) Typical ............................... ó5 sec Stop time / power down Typical ............................... ó3 sec Start/stop cycles .......................... 40,000 typical Interleave: ................................ 1:1 Buffer Size: ............................... 32K Interface: ................................. AT Recording Method: .......................... 1,7 RLL Recording Density (Kbpi) ................... 39-46 Flux Density (Kfci) ........................ 29-34 Power Requirments (Typical): Mode +5VDC ñ5% Power Spin-up 970mA Avg Peak R/W 440mA 2.2W Idle 220mA 1.1W Standby / Sleep 40mA 0.2W Physical: Height: 0.69" (17.5 mm) Length: 4.00" (101.6 mm) Width: 2.75" (69.84 mm) Weight: 0.374 lbs.(170 gm) Environmental: Temperature Operating .............................. 5øC to 55øC Non-operating .......................... -40øC to 60øC Thermal gradient ....................... 20øC per hour max Humidity Operating .............................. 5% to 90% non-condensing Non-operating .......................... 5% to 90% non-condensing Altitude (relative to sea level) Operating .............................. -200 to 10,000 feet Non-operating .......................... 40,000 feet max Reliability and Maintenance: MTBF ....................................... >250,000 hours (POH, predicted at 35 degrees C) Preventative Maintenance ................... None Component design life ...................... 5 years (minimum) Data reliability Hard read errors ...................... <10 non-recoverable per 10 to the 14th bits read Shock & Vibration (typical) Shock measured at half-sine pulse. Vibration measured at swept sine, 1 octave per minute Operating shock ........................ 100 Gs, 11ms 1/2 sine wave Non-operating shock .................... 10 Gs, 11ms 1/2 sine wave Non-operating Vibration 5-20 Hz ............................... .245" (double amplitude) 20 - 500 Hz ........................... 5 Gs peak amplitude Operating Vibration 5-20 Hz ............................... .049" (double amplitude) 20 - 300 Hz ........................... 1 Gs peak amplitude Acoustic Noise 34 dBA at 1 meter (typical) in idle (spinning) on-track mode. * The average of 10,000 random seek times (measured on independent test equipment) consitutes the average seek time specification. 2585A and 25128A are trademarks of Maxtor Corporation. Specifications subject to change without notice. ==============================================================================  ÚÄÄÄÄÂÄÄÄÄÄÄÄÄÄ¿ ÚÄÄ¿ ÚÄÄÄÄÄÄÄÄÄÄ¿ ÚÄÄÄ¿ ÚÄÄÄÄÄÄÄÄÄ¿ ÚÄ¿ ÚÄÄÄÄÄÄÄÄÄÄ¿ ³ ³ ÀÄÙ ÀÄÄÙ ÀÄÄÙ ÀÄÄÄÄÙ ÀÄÄÙ ÀÄÄÙ ³ ³ J3 ³ ³ ³ ³ J6 ³ ÀÄÄÄÂÙ ÚÄÄÄÄÄÄ¿ ÚÄÂÄÅ ÚÄÄÄÁ¿ ³|:||: ³ ³ ÃÄÅ ³ à ÀÄÄÄÄÄÄÙ J5 ³ ÃÄÅ ³ à ³ ÃÄÅ ³ à ÀÄÁÄÅ ³ à ÚÄÂÄÅ ³ à ³ ÃÄÅ ³ J1 à ³ ÃÄÅ ³ à J2 ³ ÃÄÅ ³ à ³ ÃÄÅ ³ à ³ ÃÄÅ ³ à ³ ÃÄÅ ³ à ÀÄÁÄÅ ³ à ÚÄÂÄÅ ÀÄÄÄÂÙ J4 ³ ÃÄÅ ³ ÚÄ¿ ÀÄÁÄÅ ÀÄÄÄÄÄÄÙ ³ ÚÄÄÙ ÚÄÄÄÄÄÄÄÄÙ ÀÄÄ¿ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ